Abstract Type XIII collagen belongs to the group of transmembrane collagens. In this thesis the plasma membrane localisation and function of type XIII collagen have been studied using cell biological methods. Type XIII collagen was found to reside in focal adhesions. It appeared in these structures at a very early stage of their assembly and disappeared from them concurrently with focal adhesion proteins talin and vinculin. Insect cells expressing type XIII collagen showed an enhanced adhesion to certain matrix components. These localisation and adhesion data suggested that the function of type XIII collagen is related to cell adhesion. Supporting this, in tissues type XIII collagen was found to localise to cell-matrix and cell-cell adhesion structures. Type XIII collagen was found to be partly present in cholesterol-enriched membrane microdomains. With other membrane proteins this localisation has been shown to be linked to ectodomain shedding. The connection between the membrane microdomain localisation and the ectodomain shedding of type XIII collagen was also characterised, and it was demonstrated that manipulation of the cellular cholesterol level affected the efficiency of the ectodomain shedding. Additionally, insights into intracellular shedding of type XIII collagen in the Golgi apparatus were obtained. The study of type XIII collagen expression in human cancers revealed that it was enhanced especially in the desmoplastic cancer stroma. Since the increased expression of type XIII collagen was detected during the dysplastic stages, type XIII collagen may be involved in the early pathogenesis of cancer. The result indicated that type XIII collagen is involved in the matrix remodelling. In support of this, the cell culture experiments showed that the soluble type XIII collagen ectodomain altered the vitronectin-rich matrix unfavourable for cell adhesion and spreading. This may enhance cancer metastasis. Type XIII collagen expression was also induced in the remodelled stroma of keratoconus and corneal wounds. Data suggested that myofibroblasts were responsible for the increased expression of type XIII collagen in these situations. Therefore both in cancer and in the corneal pathologies studied, type XIII collagen expression was induced by the activated stromal cells.

No description available.

Aggregation-induced emission (AIE) is a phenomenon with many applications, such as chemical sensors, biological probes, immunoassay markets, and active layers in fabricating organic light-emitting diodes. AIE materials in polymers can enhance the emissivity of such materials while having the benefits of polymeric materials. This thesis examines the use of AIE polymers to study the effect of structure on the properties. This is done by first synthesizing a monomer with AIE characteristics, tetraphenylethylene-methacrylate (TPEMA). Secondly, polymerizing TPEMA using free and controlled radical polymerizations. Finally, the copolymerization of TPEMA with methyl methacrylate (MMA) to understand the effect of spaced-out TPE groups in the polymer chain on the photoluminescence of the polymer. The structures of all intermediates and final products were characterized by nuclear magnetic resonance (NMR) and size exclusion chromatography (SEC). The AIE characteristics were proven and compared using the photoluminescence graphs, showing that the homopolymer had increased emission intensity than its monomer. The copolymer had higher emission intensity than TPEMA and higher normalized emission intensity than that of the homopolymer, showing the effect of structure on the photoluminescence. Both the homopolymer and the copolymer were easier to aggregate than the monomer, making it more effective to utilize the material in applications where it needs to be emissive in diluted solutions. The glass transition temperature and the tacticity of the homopolymer and copolymer were also compared. The thesis is divided into the following five chapters; 1. Introduction, where a brief background along with the scope of the thesis is provided; 2. Literature Review, where a summary of controlled radical polymerization and AIE is given; 3. Experimental Section, where the materials' detailed procedure and characterization are provided; 4. Results and Discussion, where results of successful experiments are discussed; 5. Concluding Remarks, where the results are summarized, and future work is discussed.

No description available.

Bottlebrush polymers are interesting topologies that have become increasingly relevant in various applications including rheology modifiers, super-soft elastomers, photonic crystals, anti-fouling coatings, the in vivo delivery of therapeutic agents, and as promising substrates in lithographic printing. These macromolecules are comprised of numerous polymeric side-chains densely grafted to a polymer backbone. The densely grafted nature of bottlebrush polymers results in steric repulsion between neighboring polymer chains, forcing these macromolecules to adopt a chain-extended conformation. Although these remarkable macromolecules have a many different applications, the transformative potential of the bottlebrush polymer topology has not been realized because the synthesis of high molecular weight bottlebrush polymers is challenging. This dissertation focusses on improving the synthesis of these large macromolecules using the grafting-through strategy in the first section and the transfer-to strategy in the second section. For the first time the effect of anchor group chemistry—the configuration of atoms linking the polymer to a polymerizable norbornene—was studied on the kinetics of ring-opening metathesis polymerization (ROMP) of macromonomers (MMs) initiated by Grubbs 3rd generation catalyst. A variance in the rate of propagation of >4-fold between similar MMs with different anchor groups was observed. This phenomenon was conserved across all MMs tested, regardless of solvent, molecular weight (MW), or repeat unit identity. Experimental and computational studies indicated that the rate differences likely resulted from a combination of varying steric demands and electronic structure among the different anchor groups. This new insight will allow others to achieve high MM conversion and prepare pure, high MW bottlebrush polymers by ROMP grafting-through. The second section of this dissertation deals with a little studied bottlebrush synthesis technique called the transfer-to method. This method is a hybrid of the grafting-from and grafting-to approaches in which the growing polymer side chains detach from the backbone, propagate freely in solution, and then reattach to the backbone in a chain transfer step. Several parameters were investigated to determine optimal conditions for this process. This study provides for the first time a guide to use the transfer-to method to produce high purity bottlebrush polymers with controllable backbone and side chain length. / Ph. D.

The delivery of nucleic acids remains the major obstacle for nucleic acid-based therapies such as gene therapy and gene silencing therapies based on RNA interference. In this dissertation we have developed and studied nucleic acid delivery vehicles based on cationic diblock glycopolymers that contain glucosamine and trehalosamine. Practical procedures were developed to synthesize 2-methacrylamido-2-deoxy glucose and 6-methacrylamido-6-deoxy trehalose starting with commercially available carbohydrates and utilizing trimethylsilyl protecting group chemistry. These monomers were polymerized via reversible addition-fragmentation chain transfer (RAFT) polymerization to yield glycopolymers with the desired lengths and low polydispersity indexes. Glycopolymers were chain-extended with aminoethylmethacrylamide to produce cationic diblock copolymers. The ability of cationic diblock copolymers to bind nucleic acids was demonstrated with gel electrophoresis and heparin exclusion assays. Complexes of the synthesized polymers with nucleic acids were studied with dynamic light scattering to reveal nanoparticles of 100-250 nm that were stable in the presence of serum proteins. Quartz crystal microbalance experiments showed that serum proteins adsorb on polytrehalose coated gold surfaces and it was suggested that these interactions may help mask the polytrehalose coated nanoparticles from potential actions of the immune system. Polytrehalose was also shown to suppress water crystallization similarly to trehalose by lowering the energies associated with the water/ice phase transition. The property was utilized to freeze-dry siRNA containing polyplexes which could be re-dissolved in water after lyophilization to yield nanoparticles. The polyplexes formulated with cationic diblock copolymers were shown to efficiently enter cervical cancer cells (HeLa cell line) and glioblastoma cells (U-87 cell line) and to deliver their nucleic acid cargo. Polyglucose-containing polymers were efficient mediators of exogenous gene expression in HeLa cells, and polytrehalose- containing polymers were effective in promoting the target gene down-regulation via RNA interference by delivered siRNA. / Ph. D.

Statistical copolymers of acrylonitrile (AN) and methyl acrylate (MA) were successfully prepared and characterized using reversible addition-fragmentation chain transfer (RAFT) copolymerization. A typical copolymer was charged with 15 wt. % MA content. This thesis describes a systematic variation of the RAFT copolymerization variables to optimize this system. In particular, the effects of chain transfer agent, initiator, temperature, and solvent on the copolymer properties were studied. / Master of Science

No / Reversible addition–fragmentation chain transfer (RAFT) polymerisation was used to produce a range of polymers terminated with an acridine group, which intercalates efficiently into dsDNA; the structure of the polymer determines the nature and strength of the interaction. Using a short 63 base pair dsDNA, discrete and well-defined DNA–polymer hybrid nanoparticles were formed, which were characterised by dynamic light scattering, small-angle X-ray scattering and atomic force microscopy. / University of Warwick, EPSRC, Swiss National Science Foundation

Yes / Amphiphilic nucleobase-containing block copolymers with poly(oligo(ethylene glycol) methyl ether methacrylate) as the hydrophilic block and nucleobase-containing blocks as the hydrophobic segments were successfully synthesized using RAFT polymerization and then self-assembled via solvent switch in aqueous solutions. Effects of the common solvent on the resultant morphologies of the adenine (A) and thymine (T) homopolymers, and A/T copolymer blocks and blends were investigated. These studies highlighted that depending on the identity of the common solvent, DMF or DMSO, spherical micelles or bicontinuous micelles were obtained. We propose that this is due to the presence of A–T interactions playing a key role in the morphology and stability of the resultant nanoparticles, which resulted in a distinct system compared to individual adenine or thymine polymers. Finally, the effects of annealing on the self-assemblies were explored. It was found that annealing could lead to better-defined spherical micelles and induce a morphology transition from bicontinuous micelles to onion-like vesicles, which was considered to occur due to a structural rearrangement of complementary nucleobase interactions resulting from the annealing process. / European Research Council (ERC), University of Warwick, Engineering and Physical Sciences Research Council (EPSRC), National Science Foundation (U.S.) (NSF)

Yes / Herein, we report the preparation of nucleobase-containing synthetic amphiphilic diblock copolymers using RAFT polymerization. Well-defined spherical micelles can be formed in aqueous solutions through the self-assembly of the amphiphilic copolymers, with the nucleobase functionality sequestered in the core of the particles. Following assembly, copolymers with the complementary nucleobase were introduced into the preformed micellar solutions. This addition induced a change in nanostructure size and morphology and this reorganization was fully characterized by DLS, TEM, SLS and SAXS analysis. The insertion of copolymers with the complementary nucleobase into formed micelles was also confirmed by 1 H NMR and UV-vis spectroscopy. For micelles consisting of moderately short hydrophobic blocks, upon the addition of complementary nucleobase copolymer a decrease in size was observed but without any accompanying morphological change. For micelles formed from longer hydrophobic blocks, a morphological transition from spheres to cylinders and then to smaller spheres was observed upon increasing the amount of the complementary copolymer. This work highlights how complementary nucleobase interactions can be used to induce nanostructure reorganization and through a simple mixing process provide access to different nanostructure sizes and morphologies. / University of Warwick, China Scholarship Council (CSC), National Science Foundation (U.S.) (NSF), Engineering and Physical Sciences Research Council (EPSRC), European Research Council (ERC)