Thesis (M.Sc.)--Memorial University of Newfoundland, 2005. / Bibliography: leaves 221-229. Also available online.

Thesis (M.S.)--Western Washington University, 2010. / Includes bibliographical references (leaves 98-102). Also issued online.

Thesis (Ph. D.)--University of Washington, 2001. / Vita. Includes bibliographical references (leaves 128-140).

Thesis (M.Sc.)--Memorial University of Newfoundland, 2002. / Bibliography: leaves 163-168. Also available online.

South America provides an outstanding laboratory for studies of magmatism and crustal evolution because it contains older Archean-Paleoproterozoic cratons that amalgamated during Mesoproterozoic and Neoproterozoic supercontinent assembly, as well as a long history of Andean magmatism that records crustal growth and reworking in an accretionary orogen. We have attempted to reconstruct the growth and evolution of South America through U-Pb geochronology and Hf isotope analyses of detrital zircons from 59 samples of sand from modern rivers and shorelines. Results from 5,524 new U-Pb ages and 1,199 new Hf isotope determinations are reported. We have also integrated our data into a compilation of all previously published zircon geochronologic and Hf isotopic information, yielding a record that includes>42,000 ages and>1,600 Hf isotope analyses. These data yield five main conclusions: (1) South America has an age distribution that is similar to most other continents, presumably reflecting the supercontinent cycle, with maxima at 2.2-1.8 Ga, 1.6-0.9 Ga, 700-400 Ma, and 360-200 Ma; (2)<200 Ma magmatism along the western margin of South America has age maxima at 183 Ma (191-175 Ma), 151 Ma (159-143 Ma), 126 Ma (131-121 Ma), 109 Ma (114-105 Ma), 87 Ma (95-79 Ma), 62 Ma (71-53 Ma), 39 Ma (43-35 Ma), 19 Ma (23-15 Ma), and 6 Ma (10-2 Ma); (3) for the past 200 Ma, there appears to be a positive correlation between magmatism and the velocity of convergence between central South America and Pacific oceanic plates; (4) Hf isotopes record reworking of older crustal materials during most time periods, with incorporation of juvenile crustal materials at ~1.6-1.0 Ga, 500-400 Ma and ~200-100 Ma; and (5) the Hf isotopic signature of<200 Ma magmatism is apparently controlled by the generation of juvenile magmas during extensional tectonism and reworking of juvenile versus evolved crustal materials during crustal thickening and arc migration.

Most researchers contend that the destruction of the Rheic Ocean culminated in the formation of the supercontinent Pangea. However, despite the importance of this ocean, there are major uncertainties in the identification of its margins, mechanisms and timing of its formation, and the geodynamics of its closure. Rocks recording the evolution of the Rheic are excellently preserved in the southern Iberian peninsula of Western Europe. Here, the Ossa Morena (OMZ) is separated from the South Portuguese (SPZ) zone by a sequence of polydeformed rocks know as the Pulo do lobo Zone (PDLZ). The PDLZ isinterpreted as a late Paleozoic accretionary prism, which contains potential vestiges of the ancient Rheic Ocean (ophiolites). The objective of this study is to better understand the processes associated with the formation of Pangea by determining the lithotectonic histories of both the PDLZ and SPZ. New field, geochronological and geochemical data are used to test and further constrain current models for the evolution of Pangea as recorded in the Variscan orogen. Fieldwork and geochronological data indicate that the PDLZ was derived from neither the OMZ (Gondwana) nor the SPZ suggesting that if the PDLZ is an accretionary prism it was not derived from the upper or lower plate. This apparent conundrum can be reconciled by a model involving excision of a crustal fragment during collision between an Iberian indenter (Gondwana) with Laurussia during the formation of Pangea. Geochronological and Geochemical data from the SPZ indicate that the lower crust isnot compositionally similar to the overlying Devonian-Carboniferous continental detritus. This unusual relationship is similar to the relationship between the relatively juvenile basement and ancient upper crust documented in the exposed portion of the Meguma terrane in the northern Appalachians, which paleogeographic reconstructions show was immediately outboard of southern Iberia in the Late Devonian. Taken together with the suggested complex tectonic history of the PDLZ the results of this thesis provide important insight into the geometry and timing of the formation of Pangea and indicate that re-interpretation may be required for what is known concerning the tectonic evolution of both the Variscan and Appalachian orogens.

Natural hazards related to ground movement that directly affect the safety of motorists and highway infrastructure include, but are not limited to, rockfalls, rockslides, debris flows, and landslides. This thesis specifically deals with the evaluation of rockfall hazards through the evaluation of LiDAR data. Light Detection And Ranging (LiDAR) is an imaging technology that can be used to delineate and evaluate geomechanically-controlled hazards. LiDAR has been adopted to conduct hazard evaluations pertaining to rockfall, rock-avalanches, debris flows, and landslides. Characteristics of LiDAR surveying, such as rapid data acquisition rates, mobile data collection, and high data densities, pose problems to traditional CAD or GIS-based mapping methods. New analyses methods, including tools specifically oriented to geomechanical analyses, are needed. The research completed in this thesis supports development of new methods, including improved survey techniques, innovative software workflows, and processing algorithms to aid in the detection and evaluation of geomechanically controlled rockfall hazards. The scientific research conducted between the years of 2006-2010, as presented in this thesis, are divided into five chapters, each of which has been published by or is under review by an international journal. The five research foci are: i) geomechanical feature extraction and analysis using LiDAR data in active mining environments; ii) engineered monitoring of rockfall hazards along transportation corridors: using mobile terrestrial LiDAR; iii) optimization of LiDAR scanning and processing for automated structural evaluation of discontinuities in rockmasses; iv) location orientation bias when using static LiDAR data for geomechanical analysis; and v) evaluating roadside rockmasses for rockfall hazards from LiDAR data: optimizing data collection and processing protocols. ii The research conducted pertaining to this thesis has direct and significant implications with respect to numerous engineering projects that are affected by geomechanical stability issues. The ability to efficiently and accurately map discontinuities, detect changes, and standardize roadside geomechanical stability analyses from remote locations will fundamentally change the state-of-practice of geotechnical investigation workflows and repeatable monitoring. This, in turn, will lead to earlier detection and definition of potential zones of instability, will allow for progressive monitoring and risk analysis, and will indicate the need for pro-active slope improvement and stabilization. / Thesis (Ph.D, Geological Sciences & Geological Engineering) -- Queen's University, 2010-03-26 11:25:15.741

Field mapping and, structural, microstructural, and chronological analyses confirm the existence of a segment of the Gurla-Mandhata-Humla fault, an orogen-parallel strike-slip dominated shear zone in the upper Karnali valley of northwestern Nepal. This shear zone forms the upper contact of, and cuts obliquely across the Greater Himalayan Sequence (GHS). Data from this study reveal two phases of GHS deformation. Phase 1 is characterized by U-Th-Pb monazite crystallization ages (~26–12 Ma, peak ~18–15 Ma), consistent with typical Neohimalayan metamorphic ages, and the final stages of south-directed extrusion of the GHS. Phase 2 is characterized by south-dipping high-strain foliations and intensely developed ESE-WNW trending, shallowly plunging mineral elongation lineations, indicating orogen-parallel extension. Thermochronology of muscovite defining these fabrics implies that the area was cooling and experiencing orogen-parallel extension by ~15–9 Ma. Mineral deformation mechanisms and quartz c-axis patterns of these fabrics record a rapid increase in temperature from ~350°C along the shear zone, to ~650°C at ~2.5 structural km below the shear zone. Such temperature gradients may be remnants of telescoped and/or flattened isotherms generated during south-directed extrusion of the GHS. Overprinting ESE-WNW fabrics record progressive deformation of the GHS at lower temperatures. Progressive deformation included a significant component of pure shear, as indicated by symmetric high-temperature quartz c-axis fabrics and a lower-temperature vorticity estimate (~59% pure shear). A transition in c-axis fabrics from type I to type II cross-girdles at ~ 1.2 km below the fault could indicate a transition from plane strain towards constriction. Together, these data suggest orogen-parallel extension was occurring as a result of transtension. This study reveals a transition from south-directed extrusion of the GHS to orogen-parallel extension between ~15–13 Ma. Comparing these data with tectonic events across the Himalaya reveals an orogen-wide middle Miocene transition, coeval with the uplift of eastern Tibet. This is consistent with interpretations invoking radial spreading of Tibet and east-directed lower-crustal flow to explain orogen-parallel extension. Our study leads to the suggestion that a transition affecting mid- to lower-crustal processes may be responsible for the cessation of south-directed extrusion of the GHS and onset of east-directed lower-crustal flow. / Thesis (Master, Geological Sciences & Geological Engineering) -- Queen's University, 2012-09-23 02:16:09.326

The study area is located within the Neogene-Quaternary sequences on top of the Mesozoic accreted mass at the northwest of Kazan (40 km NW of Ankara) between Karalar and Alibey villages. The research deals with the post-Miocene deformational history of an area situated at the southern edge of Galatian Volcanic Province. Two main Neogene rock sequences are cropped out / 1) Late Miocene Pazar Formation, 2) Plio-Quaternary Sinap Formation. The Pazar Formation has a succession composed mainly of clastics at the bottom and, cherts and limestones to the top of the sequence representing a fresh water lake environment. Sedimentation seems to be affected by the intense volcanism going on in the Galatian Volcanic Province. Location of a mammalian fossil found in the Pazar Formation yielded a possible time interval between MN-9 to MN-13 (Middle to Late Miocene). Sinap Formation overlies the Pazar Formation unconformably and it is dominantly represented by fluvial clastics. The post-Miocene deformational studies based on the analysis of the structural data collected from bedding planes and fault planes. Totally 213 dip-strike measurements from the Neogene units and 204 slip lineation data from the fault planes were taken. Fold analysis of dip and strike measurements taken from the Pazar Formation gave a common fold axis trending in N430E direction. Similarly fold analysis for the Sinap Formation resulted N400E striking trend for the fold axis. Stress analysis was performed by processing slip lineation data using Angelier direct inversion method. In the analysis, no reliable results for the post-Miocene compressional phase could be obtained. But the results of the post-Plio-Quaternary extensional regime are strongly reliable. It clearly gives an extension in NW-SE direction. Stress analysis together with the field observations show that the area has been structurally evolved in several phases of deformation. The NW-SE to N-S-directed post-Miocene compressional event is followed by a regional extension operating since Plio-Quaternary.

Thesis (M.S.)--University of Texas at El Paso, 2007. / Title from title screen. Vita. CD-ROM. Includes bibliographical references. Also available online.