Published Article / Today's industries are based on an automated workplace. These automated workplaces are efficient, reconfigurable and intelligent automated environments. They are filled with technology, robotics, Automated Guided Vehicle (AGV) and, or Unmanned Aerial Vehicles (UAV) etc. For full automation will one need to effectively track an object, unmanned aerial vehicle (UAV) or automated guided vehicle (AGV). Effective tracking of vehicles can be used for control. This could result in less hardware on the craft that leads to a longer battery life, a bigger pay load or more processing power. This system track by using a stationary colour camera placed at an optimal placing in the automated workplace. The vehicle or objects are painted in two colours (colour A and colour B) that are not present in the automated workplace. The images from the camera are hue colour filtered to extract only the object or vehicle. The area, placement in frame and relationship between colour A and B are used for position and determine the orientation of AGV, UAV or object.

This thesis work was undertaken to develop a new high level command for an unmanned aerial vehicle. The command is assumed to make the UAV follow a reference position that is placed on a certain distance to an object. At the same time the UAV is assumed to move more smoothly than the reference position and the UAV is allowed to follow the reference position with margin. The problem was solved with an automatic control system that takes the reference position as input signal and has a fictitious position as output signal. The fictitious position moves smoothly inside the margin and irregular behavior of the reference position is smoothed out by the automatic control system. The fictitious position is affected by strong feedback outside the margin and weak feedback inside the margin. This makes the fictitious position to stay inside the margin and moves smoothly inside the margin. The UAV follows the fictitious position instead of the reference position. In this way the UAV holds a certain distance to an object and at the same time moves smoother than the object.

The ever-increasing demand for better mobile experiences is propelling the research communities to look ahead at how future networks can be geared up to meet such demands. It is likely that the next-generation of wireless communications will be revolutionary, outpacing the current systems capabilities in terms connectivity, reliability and intelligence. These trends and predictions will cause a revolutionary change in the wireless communications. In this context, the concept of Ultra-Dense Network (UDN) is poised to be the cornerstone of the development of fifth generation(5G) systems, whereby a massive number of base stations (BSs) are deployed for enhancing the network performance metrics. Though such densification might be economically viable in urban areas, it is mostly unfavorable in rural ones due to the sheer complexity and the various factors involved the planning and installation processes; all of which trigger the need for cost-effective, flexible and easily-implementable solutions. As a result, unmanned aerial vehicles (UAVs) emerge as a promising alternative solution for enhancing wireless coverage. Due to their mobility capabilities, UAVs are of particular importance in events of (i) terrestrial-based cellular systems dilapidation, (ii) infrastructure absence in remote and suburban areas, or (iii) limited-duration events or activities wherein there is a short-term need for supplementary network resources to handle the overload. While a growing body literature works towards characterizing and providing insights into the performance of UAVs-only networks (serving the first two purposes), understanding the performance of such networks when coupled with existing terrestrial BSs remains a challenging, yet interesting, open research venue. Towards this direction, this thesis provides a rigorous analysis of the downlink coverage probability of hybrid aerial-terrestrial networks using tools from Stochastic Geometry. The thesis presents a mathematical model that characterizes the coverage probability metric under different network environments. The proposed model is validated against intensive simulations so as to substantiate the analytical results. The developed work is essential to understanding the premises of one possible solution to the UDNs of tomorrow, capture its key performance metrics and, most importantly, to uncover key design insights and reveal new directions for the wireless communication industry.

Energy harvesting technology has the ability to create autonomous, self-powered electronic systems that do not rely on battery power for their operation. The term energy harvesting describes the process of converting ambient energy surrounding a system into useful electrical energy through the use of a specific material or transducer. A widely studied form of energy harvesting involves the conversion of mechanical vibration energy into electrical energy using piezoelectric materials, which exhibit electromechanical coupling between the electrical and mechanical domains. Typical piezoelectric energy harvesting systems are designed as add-on systems to a host structure located in a vibration rich environment. The added mass and volume of conventional vibration energy harvesting designs can hinder to the operation of the host system. The work presented in this dissertation focuses on advancing piezoelectric energy harvesting concepts through the introduction of multifunctionality in order to alleviate some of the challenges associated with conventional piezoelectric harvesting designs. The concept of multifunctional piezoelectric self-charging structures is explored throughout this work. The operational principle behind the concept is first described in which piezoelectric layers are directly bonded to thin-film battery layers resulting in a single device capable of simultaneously harvesting and storing electrical energy when excited mechanically. Additionally, it is proposed that self-charging structures be embedded into host structures such that they support structural load during operation. An electromechanical assumed modes model used to predict the coupled electrical and mechanical response of a cantilever self-charging structure subjected to harmonic base excitation is described. Experimental evaluation of a prototype self-charging structure is then performed in order to validate the electromechanical model and to confirm the ability of the device to operate in a self-charging manner. Detailed strength testing is also performed on the prototype device in order to assess its strength properties. Static three-point bend testing as well as dynamic harmonic base excitation testing is performed such that the static bending strength and dynamic strength under vibration excitation is assessed. Three-point bend testing is also performed on a variety of common piezoelectric materials and results of the testing provide a basis for the design of self-charging structures for various applications. Multifunctional vibration energy harvesting in unmanned aerial vehicles (UAVs) is also investigated as a case study in this dissertation. A flight endurance model recently developed in the literature is applied to model the effects of adding piezoelectric energy harvesting to an electric UAV. A remote control foam glider aircraft is chosen as the test platform for this work and the formulation is used to predict the effects of integrating self-charging structures into the wing spar of the aircraft. An electromechanical model based on the assumed modes method is then developed to predict the electrical and mechanical behavior of a UAV wing spar with embedded piezoelectric and thin-film battery layers. Experimental testing is performed on a representative aluminum wing spar with embedded self-charging structures in order to validate the electromechanical model. Finally, fabrication of a realistic fiberglass wing spar with integrated piezoelectric and thin-film battery layers is described. Experimental testing is performed in the laboratory to evaluate the energy harvesting ability of the spar and to confirm its self-charging operation. Flight testing is also performed where the fiberglass spar is used in the remote control aircraft test platform and the energy harvesting performance of the device is measured during flight. / Ph. D.

The ability to detect, monitor, and forecast the movement of airborne plant pathogens in agricultural ecosystems is essential for developing rational approaches to managing these habitats. We developed an autonomous (self-controlling) unmanned aerial vehicle (UAV) platform for aerobiological sampling tens to hundreds of meters above agricultural fields. Autonomous UAVs have the potential to extend the range of aerobiological sampling, improve positional accuracy of sampling paths, and enable coordinated flight with multiple aircraft at different altitudes. We equipped a Senior Telemaster model airplane with two spore-sampling devices and a MicroPilot autonomous system, and we conducted over 60 autonomous microbe-sampling flights at Virginia Tech's Kentland Farm. To determine the most appropriate sampling path for aerobiological sampling, we explored a variety of different sampling patterns for our autonomous UAVs including multiple GPS waypoints plotted over a variety of spatial scales. We conducted a total of 25 autonomous aerobiological sampling flights for five different aerobiological sampling patterns. The pattern of a single waypoint exhibited the best flight characteristics with good positional accuracy and standard deviations in altitude from 1.6 to 2.8 meters. The four point pattern configured as a rectangle also demonstrated good flight characteristics and altitude standard deviations from 1.6 to 4.7 meters. / Master of Science

ITC/USA 2006 Conference Proceedings / The Forty-Second Annual International Telemetering Conference and Technical Exhibition / October 23-26, 2006 / Town and Country Resort & Convention Center, San Diego, California / Brigham Young University recently introduced a project for undergraduates in which a miniature unmanned aerial vehicle system is constructed. The system is capable of autonomous flight, takeoff, landing, and navigation through a planned path. In addition, through the use of video and telemetry collected by the vehicle, accurate geolocation of specified targets is performed. This paper outlines our approach and successes in facilitating this accomplishment at the undergraduate level.

Thesis (MSc)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: Unmanned aerial vehicles with vertical take-off and landing capabilities have received extensive attention worldwide in the last decade. Their low detectability, high manoeuvrability in confined spaces, and their capability for out-of-sight operations make them practical solutions for an array of military and civilian missions. The main advantage of shrouded rotors in hover and low speed conditions is the decreased blade tip induced drag when the tip gap is small enough. A well-designed shroud augments the rotor thrust in hover and low axial flight conditions. It also provides noise reduction and safety. A contra-rotating rotor system eliminates the need for separate anti-torque devices, thus producing a smaller footprint and a more compact vehicle. In this study a more efficient coaxial rotor for the ducted coaxial rotor system as published by (Lee 2010) was developed. The first phase of the design process consisted of the selection and numerical analysis of the best suited parent airfoils for the rotors by using XFOIL and XFLR 5. The second phase dealt with the design of a counter-rotating rotor system for the existing cambered shroud as published by (Lee, 2010), using the DFDC-070ES2a two dimensional code, specifically written for ducted rotor optimization. The final phase of the study dealt with the Computational Fluid Dynamic (CFD) verification of the design in ANSYS-CFX 15.07. A comparison between the CFX predictions of the newly designed rotor system and the reference design indicates a 33% improvement in hover thrust at the design power input. / AFRIKAANSE OPSOMMING: Onbemande lugvaartuie met vertikale opstyg en landings vermoëns het uitgebreide aandag wêreldwyd in die laaste dekade geniet. Hul lae waarneembaarheid, hoë beweegbaarheid in beperkte ruimtes, en hul vermoë om buite-sig operasies uit te voer maak dat hulle praktiese oplossings vir 'n verskeidenheid van militêre en burgerlike missies is. Die grootste voordeel van gehulde rotors in hangvlug en lae spoed omstandighede is die afname in die lem punt sleepkrag wanneer die lem punt gaping klein genoeg is. 'n Goed ontwerpde omhulsel dra by tot die rotor stukrag in hangvlug en lae aksiale vlug omstandighede. Dit bied ook geraasreduksie en veiligheid. 'n Kontra-roterende rotorstelsel skakel die vereiste van afsonderlike anti-wringkrag toestelle uit, wat lei tot 'n kleiner voetspoor en 'n meer kompakte voertuig. In hierdie studie is 'n meer doeltreffende koaksiale rotor vir die gehulde koaksiale rotor stelsel soos gepubliseer deur (Lee 2010) ontwikkel. Die eerste fase van die ontwerp-proses het bestaan uit die seleksie en numeriese analise van die mees geskikte lemprofiele vir die rotors deur die gebruik van XFOIL en XFLR 5. Fase twee het die ontwerp van 'n teen-roterende rotor stelsel vir die bestaande omhulsel soos gebruik in (Lee, 2010) se publikasie behels. Die ontwerp is met behulp van DFDC-070ES2a, ‘n twee dimensionele kode wat spesifiek vir gehul-rotor optimering geskryf is, gedoen. Die verifikasie van die nuwe ontwerp is in die finale fase met behulp van die berekeings vloeidinamika sagteware, ANSYS-CFX 15.07 gedoen. ‘n Vergelyking tussen die CFX prestasie voorspelling vir die nuwe rotorstelsel en die gepubliseerde data van (Lee, 2010) toon ‘n 33% toename in hangvlug stukrag by die ontwerpsdrywing.

ITC/USA 2011 Conference Proceedings / The Forty-Seventh Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2011 / Bally's Las Vegas, Las Vegas, Nevada / This paper describes the development and test results of a Frequency Modulated Continuous Wave (FMCW) L-Band radar testbed designed to detect obstacles in the proximity of an Unmanned Aerial Vehicle (UAV). From laboratory loopback tests, it was calculated that with pulse compression and a transmit power of 150 mW (22 dBm), the radar is capable of detecting an object with a 0.014-m2 radar cross-sectional area at ranges between 500 ft to 1 mi. Analysis shows that post processing of the collected data would reveal information about the obstacle such as its range and location relative to the aircraft. Design and testing procedures are discussed.

Performance of inflatable wings was investigated through laboratory, wind tunnel and flight-testing. Three airfoils were investigated, an inflatable-rigidazable wing, an inflatable polyurethane wing and a fabric wing restraint with a polyurethane bladder. The inflatable wings developed and used within this research had a unique outer airfoil profile. The airfoil surface consisted of a series of chord-wise \bumps.andamp;quot; The effect of the bumps or \surface perturbationsandamp;quot; on the performance of the wings was of concern and was investigated through smoke-wire flow visualization. Aerodynamic measurements and predictions were made to determine the performance of the wings at varying chord based Reynolds Numbers and angles of attack. The inflatable baffes were found to introduce turbulence into the free-stream boundary layer, which delayed separation and improved performance. Another area of concern was aeroelasticity. The wings contain no solid structural members and thus rely exclusively on inflation pressure for stiffness. Inflation pressure was varied below the design pressure in order to examine the effect on wingtip twist and bending. This lead to investigations into wing deformation due to aerodynamic loading and an investigation of wing flutter. Photogrammetry and laser displacement sensors were used to determine the wing deflections. The inflatable wings exhibited wash-in deformation behavior. Alternately, as the wings do not contain structural members, the relationship between stiffness and inflation pressure was exploited to actively manipulate wing through wing warping. Several warping techniques were developed and employed within this re-search. The goal was to actively influence the shape of the inflatable wings to affect the flight dynamics of the vehicle employing them. Researchers have developed inflatable beam theory and models to analyze torsion and bending of inflatable beams and other inflatable structures. This research was used to model the inflatable wings to predict the performance of the inflatable wings during flight. Design elements of inflatable wings incorporated on the UAVs used within this research are also discussed. Finally, damage resistance of the inflatable wings is shown from results of flight tests.

The main objective of this thesis is to introduce a simulation platform, which has been developed utilizing Pogamut and USARSim, for cooperative aerial surveillance using multiple unmanned aerial vehicles (UAVs). The graphical user interface (GUI) of the simulator contains the automatically created bird's eye view of a 3D virtual environment. This is used to enter locations and parameters of objects (UAVs, charging stations and areas) and also to visualize the process of a simulation. The thesis proposes a system for the analysis of the quality of surveillance, whose results are presented in the GUI in the form of a time graph and a heat map. Part of the proposed platform is a UAV objective-based control system including charging stations scheduling. A total of seven algorithms for cooperative surveillance has been implemented, tested in three different scenarios and analyzed for coverage quality. Powered by TCPDF (www.tcpdf.org)