1 |
[en] DISCONTINUITIES INDICATION IN METALLIC AND COMPOSITE MATERIALS: A COMPARISON OF NON-DESTRUCTIVE METHODS / [pt] INDICAÇÃO DE DESCONTINUIDADES EM MATERIAIS METÁLICOS E COMPÓSITOS: UMA COMPARAÇÃO ENTRE MÉTODOS NÃO DESTRUTIVOSMARCIO JARDIM DE OLIVEIRA 15 April 2015 (has links)
[pt] O parque industrial nos países em desenvolvimento necessita, cada vez mais,
se adaptar a uma nova filosofia de serviço em que equipamentos considerados
como seguros são aqueles que podem ser inspecionadas de forma confiável. Neste
contexto, ensaios não destrutivos (END) são valiosas ferramentas usadas no
controle de qualidade, manutenção de componentes e, principalmente, na avaliação
da integridade estrutural de tais equipamentos. Este trabalho teve como objetivo
avaliar a eficiência de diferentes técnicas de END (radiação penetrante, partículas
magnéticas e ultrassom) na detecção de descontinuidades simuladas em amostras
de material metálico e de compósito. Os resultados experimentais mostraram que
os ensaios com raios X, dentre todas as técnicas adotadas na inspeção da amostra
metálica, apresentou a maior eficiência na detecção das diferentes geometrias de
descontinuidades. Entretanto, nenhuma das técnicas de END possibilitou a
detecção de descontinuidades na amostra do material compósito. / [en] The industrial park in developing countries need, increasingly, to adapt to a
new service philosophy in which equipments considered as safe are those that can
be inspected in a reliable way. In this context, non-destructive testing (NDT) are
valuable tools used in quality control, maintenance of components and especially in
assessing the structural integrity of such equipment. This study aimed to evaluate
the efficiency of different NDT techniques (penetrating radiation, ultrasound and
magnetic particles) in the detection of simulated discontinuities in samples of
metallic and composite materials. The experimental results showed that the X-ray,
considering all techniques adopted in the inspection of the metallic sample,
showed the highest efficiency in the detection of different geometries of
discontinuities. However, anynone of NDT techniques allowed the detection of
discontinuities in the sample of the composite material.
|
2 |
[pt] MICROSCOPIA MAGNÉTICA DE VARREDURA UTILIZANDO SENSORES DE EFEITO HALL COM POLARIZAÇÃO DE CORRENTE PULSADA / [en] SCANNING MAGNETIC MICROSCOPY USING HALL EFFECT SENSORS BIASED WITH PULSED CURRENTLANNA ISABELY MORAIS SINIMBU 19 October 2023 (has links)
[pt] A pesquisa de caracterização de materiais é fundamental para o
desenvolvimento de diversas tecnologias. No campo de estudo de amostras
anisotrópicas como o caso encontrado no paleomagnetismo, é importante estudar
a caracterização magnética de minerais rochosos para compreender o campo
geomagnético. A caracterização de amostras anisotrópicas, como rochas, tem
aplicações na datação do tempo geológico e na caracterização de minérios que
sofrem mudanças magnéticas em temperaturas superiores à de Curie. Assim, é
necessário conhecer as propriedades físicas desses materiais em relação ao
comportamento magnético. Existem várias instrumentações usados neste estudo,
como magnetômetro utilizando sensores Superconducting Quantum Interference
Device (SQUID), magnetômetro de Amostra Vibrante (VSM), Magnetic Property
Measurement System (MPMS) e os Microscópios Magnéticos de Varreduras
(MMV) entre outros. Entretanto, o MMV permite mapear o comportamento
magnético do material realizando desta forma uma caracterização magnética local
da amostra. Nesse contexto, foi proposta uma alternativa de leitura usando a
técnica Delta Mode da empresa Keithley no MMV. O objetivo é eliminar os efeitos
termoelétricos, realizar medições com baixo ruído de tensão e obter uma
alternativa para a leitura do campo magnético induzido no MMV. No
desenvolvimento do trabalho, foram utilizados sensores de efeito Hall do modelo
HQ-811 em uma configuração gradiométrica, juntamente com uma fonte de
corrente (Keithley, modelo 6220) e um Nanovoltímetro (Keithley, modelo
2182A). Os resultados iniciais da calibração revelaram um desvio de cerca de 6 por cento
nas medições. Com base nessa calibração, nosso objetivo final é empregar a
técnica Delta Mode no MMV para obter as curvas de magnetização das amostras,
mesmo em situações desafiadoras de sobreposição de sinais de campo magnético
induzido. A metodologia adotada envolve o uso de partículas magnéticas de óxido
de ferro em escala nano e micro, posicionadas em três cavidades cilíndricas (A1,
A2 e A3) de aproximadamente 800 micrômetros de diâmetro com 800 micrômetros de profundidade,
dentro do mesmo porta-amostra. Durante o experimento, um dos desafios foi lidar
com a sobreposição de sinais quando aplicado um campo magnético perpendicular
ao plano do porta-amostra. Para determinar o valor de magnetização de cada
amostra, utilizamos um modelo teórico de um cilindro de corrente devido ao
formato das cavidades onde as amostras foram depositadas. Os valores de
magnetizações encontrados para diferentes espaçamentos de posicionamento das
amostras foram em média de AM1= 62,59 Am(2)
/kg, AM2= 13,14 Am(2)
/kg e AM3=
10,13 Am(2)
/kg para um campo de 0,5 T, onde apresentaram reprodutividade para
diferentes situações. / [en] Materials characterization research is fundamental for the development of various technologies. In the field of anisotropic sample studies, such as in paleomagnetism, it is important to investigate the magnetic characterization of rock minerals to understand the geomagnetic field. Characterizing anisotropic samples, such as rocks, has applications in geological time dating and the characterization of ores that undergo magnetic changes at temperatures higher than the Curie temperature. Therefore, it is necessary to understand the physical properties of these materials in relation to their magnetic behavior. Various instrumentation techniques are used in this study, including magnetometers using Superconducting Quantum Interference Device (SQUID) sensors, Vibrating Sample Magnetometer (VSM), Magnetic Property Measurement System (MPMS), and Magnetic Scanning Microscopes (MMV), among others. However, MMV allows for mapping the magnetic behavior of the material, thus providing a local magnetic characterization of the sample. In this context, an alternative reading technique using the Delta Mode of the Keithley company was proposed for MMV. The objective is to eliminate thermoelectric effects, perform low-noise voltage measurements, and provide an alternative for reading the induced magnetic field in MMV. In the course of this work, Hall effect sensors of the HQ-811 model in a gradiometric configuration, along with a current source (Keithley, model 6220), and a Nanovoltmeter (Keithley, model 2182A) were used. The initial calibration results revealed a deviation of about 6 percent in the measurements. Based on this calibration, our ultimate goal is to employ the Delta Mode technique in the MMV to obtain the magnetization curves of the samples, even in challenging situations of overlapping induced magnetic field signals. The adopted methodology involves the use of nano- and micro-scale iron oxide magnetic particles positioned in three cylindrical cavities (A1, A2, and A3) of approximately 800 micrometers in diameter with 800 micrometers in depth, within the same sample holder. During the experiment, one of the challenges was dealing with signal overlap when a magnetic field was applied perpendicular to the plane of the sample holder. To determine the magnetization value of each sample, a theoretical model of a current cylinder was used due to the shape of the cavities where the samples were deposited. The magnetization values found for different sample positioning spacings were on average AM1 = 62.59 Am(2)/kg, A(2) = 13.14 Am(2)/kg, and A3 = 10.13 Am(2)/kg for a magnetic field of 0.5 T, which showed reproducibility for different situations.
|
Page generated in 0.055 seconds