Thesis (M. Environmental Science)--North-West University, Potchefstroom Campus, 2006.

In mining industry, waste storage is a very prominent issue / in this respect, safety of storage structures is one of the leading problems in the industry. Most of the tailings dams require remedial measures, throughout their lifespan to increase their reliability. The objective of the study is to investigate stability problems of formerly constructed but newly raised Eti Copper Mine tailings dam and alternative dam geometries for future raises. Plenty of methods were developed to analyze the reliability of structures / limit equilibrium methods, finite element methods and finite difference methods are among them. In this case, stability of the dam was analyzed with finite element method under static loading conditions. In order to determine input parameters properly, disturbed samples obtained at the field investigations were used. For this purpose, several laboratory experiments were conducted to determine natural moisture content, grain size distribution, specific gravity, Atterberg limits, maximum dry density and shear strength parameters of tailings and embankment material.

This thesis presents the results of an investigation of factors which influence the geotechnical properties of frozen mine backfill (FMB). FMB has extensive application potential for mining in permafrost areas. The uniaxial compressive strength (UCS) of hardened backfill is often used to evaluate mine backfill stability. However, the deformation behaviour and stiffness of the FMB are also key design properties of interest. In this thesis, uniaxial compressive tests were conducted on FTB and FCPB samples. Information about the geotechnical properties of FMB is obtained. The effects of FMB mix components and vertical compression pressure on the geotechnical properties of FMB are discussed and summarized. An optimum total water content of 25%-35% is found in which the strength and the modulus of elasticity of the FTB are 1.4-3.2 MPa and 35-58 MPa, respectively. It is observed that a small amount (3-6%) of cement can significantly change the geotechnical properties of FTB.

Naphthenic acids (NAs) are toxic organic acid compounds released during the caustic hot-water extraction of crude oil from oil sands in north-eastern Alberta, Canada. NAs subsequently accumulate in the large volume of oil sands process water (OSPW) produced daily by oil sands operations. The complexity of dealing with a mixture of over 200 individual NA compounds, combined with their acute aquatic toxicity and large volume of production has made them an emerging pollutant of concern for western Canada. The following thesis outlines a variety of experiments designed to determine the potential to use wetland plants to enhance the dissipation of NAs from OSPW (phytoremediation). <p>Investigations were carried out with three native emergent macrophyte species cattail (<i>Typha latifolia</i>), common reed (<i>Phragmites australis </i>subsp. <i>americanus</i>), and hard-stem bulrush (<i>Scirpus acutus</i>) to see if they enhanced the dissipation of NAs from a hydroponic system. Dissipation of NAs (at 30 mg L-1 and 60 mg L-1) was investigated with both a commercially available NA mixture as well as with a NA mixture extracted from the OSPW. Dissipation of NAs was also investigated under the different ionized forms of NAs (ionized, pH = 7.8; and non-ionized, pH = 5.0) to better elucidate the mechanisms of NA uptake and toxicity in plants. Phytotoxicity of NAs was investigated in hydroponic experiments through fresh weight gain and evapotranspiration was monitored throughout the experiment by water uptake. Commercially available NA mixture was more phytotoxic than oil sands NAs mixture. As well, NAs were found to be more phytotoxic in their non-ionized form therefore indicating that they may be taken up through an ion-trap‟ mechanism. However despite this, no significant dissipation of total NAs was observed from planted hydroponic systems. Nevertheless there was a significant change in the distribution (percent abundance) of individual NA families of certain size. These changes were related to the one- and two-ring NA compounds (Z = -2 and Z = -4). Despite not detecting any dissipation of total NAs from the systems, plants were able to reduce the toxicity of a NA system over 30 days by 45% as determined by Daphnia magna acute toxicity bioassays; a 11% greater reduction than unplanted systems.<p> Studies were also conducted investigating the microbial community inhabiting cattail roots exposed to NAs. It was observed that the rhizosphere community changed with NA exposure, with a general increase in potentially pathogenic bacteria and a decrease in bacteria previously found to be beneficial to plant growth. The observed microbial community change could be an indirect effect of the Phytotoxicity experienced by aquatic macrophytes exposed to NAs. Synchrotron-sourced, fourier transform microspectroscopy analysis of root cross sections revealed that there were significant physiological changes to those roots exposed to NAs. These changes were identified as being cell death in the plant root epidermis as well as a change in the chemistry of parenchyma cells in the root pith. It is not known if these changes are a direct effect of NAs to the plant or due to changes of the associated rhizosphere community in the roots or some combination of both these factors.

Naphthenic acids (NAs) comprise a complex mixture of alkyl-substituted acyclic and cycloaliphatic carboxylic acids. NAs are present in wastewaters at petroleum refineries and in the process waters of oil sands extraction plants where they are primarily retained in large tailing ponds in the Athabasca region of Northern Alberta. The toxicity of these waters, primarily caused by NAs, dictates the need for their treatment.Bioremediation is considered as one of the most cost-effective approaches for the treatment of these wastewaters. Ex-situ bioremediation conducted in a bioreactor optimizes the microbial growth and activity by controlling environmental conditions resulting in efficient conversion of the contaminants to less harmful compounds. In this work, a circulating packed bed bioreactor (CPBB), with improved mixing, mass transfer and biomass hold-up has been used to study biodegradation of several model NA compounds: namely trans-4-methyl-1-cyclohexane carboxylic acid (trans-4MCHCA), a mixture of cis- and trans- 4-methyl-cyclohexane acetic acid (4MCHAA), and octanoic acid as well co-biodegradation of these naphthenic acids with octanoic acid, using a mixed culture developed in our laboratory. The biodegradation rates achieved for trans-4MCHCA in the CPBB are far greater than those reported previously in the literatures. The maximum biodegradation rate of trans-4MCHCA observed during batch operation was 43.5 mg/L-h, while a rate of 209 mg/L-h was achieved during continuous operation. Although cis-4MCHAA is more resistant to biodegradation when compared with trans-4MCHCA, the experimental results obtained from this study indicated both isomers were effectively biodegraded in the CPBB, with the maximum biodegradation rates being as high as 2.25 mg/L-h (cis-4MCHAA) and 4.17 mg/L-h (trans-4MCHAA) during batch operations and 4.17 mg/L-h(cis-4MCHAA) and 7.80 mg/L-h (trans-4MCHAA) during the continuous operation. Optimum temperature for biodegradation of 4MCHAA was determined as 25 aC. Furthermore, the biodegradation rate of single ring NAs (trans-4MCHCA and 4MCHAA) were found to be significantly improved through utilization of octanoic acid as a co-substrate. For example, the maximum biodegradation rate of trans-4MCHCA obtained during batch operation with the presence of octanoic acid was 112 mg/L-h, which was 2.6 times faster than the maximum value of 43.5 mg/L-h when trans-4MCHCA was used as a sole substrate. Similarly, the highest biodegradation rates of cis-4MCHAA and trans-4MCHAA were 16.7 and 28.4 mg/L-h in the presence of octanoic acid, which were 7.4 and 6.8 times higher than the maximum rates of 2.25 and 4.17 mg/L-h in the absence of octanoic acid.

Naphthenic acids (NAs) comprise a complex mixture of alkyl-substituted acyclic and cycloaliphatic carboxylic acids. NAs are present in wastewaters at petroleum refineries and in the process waters of oil sands extraction plants where they are primarily retained in large tailing ponds in the Athabasca region of Northern Alberta. The toxicity of these waters, primarily caused by NAs, dictates the need for their treatment.Bioremediation is considered as one of the most cost-effective approaches for the treatment of these wastewaters. Ex-situ bioremediation conducted in a bioreactor optimizes the microbial growth and activity by controlling environmental conditions resulting in efficient conversion of the contaminants to less harmful compounds. In this work, a circulating packed bed bioreactor (CPBB), with improved mixing, mass transfer and biomass hold-up has been used to study biodegradation of several model NA compounds: namely trans-4-methyl-1-cyclohexane carboxylic acid (trans-4MCHCA), a mixture of cis- and trans- 4-methyl-cyclohexane acetic acid (4MCHAA), and octanoic acid as well co-biodegradation of these naphthenic acids with octanoic acid, using a mixed culture developed in our laboratory. The biodegradation rates achieved for trans-4MCHCA in the CPBB are far greater than those reported previously in the literatures. The maximum biodegradation rate of trans-4MCHCA observed during batch operation was 43.5 mg/L-h, while a rate of 209 mg/L-h was achieved during continuous operation. Although cis-4MCHAA is more resistant to biodegradation when compared with trans-4MCHCA, the experimental results obtained from this study indicated both isomers were effectively biodegraded in the CPBB, with the maximum biodegradation rates being as high as 2.25 mg/L-h (cis-4MCHAA) and 4.17 mg/L-h (trans-4MCHAA) during batch operations and 4.17 mg/L-h(cis-4MCHAA) and 7.80 mg/L-h (trans-4MCHAA) during the continuous operation. Optimum temperature for biodegradation of 4MCHAA was determined as 25 aC. Furthermore, the biodegradation rate of single ring NAs (trans-4MCHCA and 4MCHAA) were found to be significantly improved through utilization of octanoic acid as a co-substrate. For example, the maximum biodegradation rate of trans-4MCHCA obtained during batch operation with the presence of octanoic acid was 112 mg/L-h, which was 2.6 times faster than the maximum value of 43.5 mg/L-h when trans-4MCHCA was used as a sole substrate. Similarly, the highest biodegradation rates of cis-4MCHAA and trans-4MCHAA were 16.7 and 28.4 mg/L-h in the presence of octanoic acid, which were 7.4 and 6.8 times higher than the maximum rates of 2.25 and 4.17 mg/L-h in the absence of octanoic acid.

This thesis presents the results of an investigation of factors which influence the geotechnical properties of frozen mine backfill (FMB). FMB has extensive application potential for mining in permafrost areas. The uniaxial compressive strength (UCS) of hardened backfill is often used to evaluate mine backfill stability. However, the deformation behaviour and stiffness of the FMB are also key design properties of interest. In this thesis, uniaxial compressive tests were conducted on FTB and FCPB samples. Information about the geotechnical properties of FMB is obtained. The effects of FMB mix components and vertical compression pressure on the geotechnical properties of FMB are discussed and summarized. An optimum total water content of 25%-35% is found in which the strength and the modulus of elasticity of the FTB are 1.4-3.2 MPa and 35-58 MPa, respectively. It is observed that a small amount (3-6%) of cement can significantly change the geotechnical properties of FTB.

Naphthenic acids (NAs) are toxic organic acid compounds released during the caustic hot-water extraction of crude oil from oil sands in north-eastern Alberta, Canada. NAs subsequently accumulate in the large volume of oil sands process water (OSPW) produced daily by oil sands operations. The complexity of dealing with a mixture of over 200 individual NA compounds, combined with their acute aquatic toxicity and large volume of production has made them an emerging pollutant of concern for western Canada. The following thesis outlines a variety of experiments designed to determine the potential to use wetland plants to enhance the dissipation of NAs from OSPW (phytoremediation). <p>Investigations were carried out with three native emergent macrophyte species cattail (<i>Typha latifolia</i>), common reed (<i>Phragmites australis </i>subsp. <i>americanus</i>), and hard-stem bulrush (<i>Scirpus acutus</i>) to see if they enhanced the dissipation of NAs from a hydroponic system. Dissipation of NAs (at 30 mg L-1 and 60 mg L-1) was investigated with both a commercially available NA mixture as well as with a NA mixture extracted from the OSPW. Dissipation of NAs was also investigated under the different ionized forms of NAs (ionized, pH = 7.8; and non-ionized, pH = 5.0) to better elucidate the mechanisms of NA uptake and toxicity in plants. Phytotoxicity of NAs was investigated in hydroponic experiments through fresh weight gain and evapotranspiration was monitored throughout the experiment by water uptake. Commercially available NA mixture was more phytotoxic than oil sands NAs mixture. As well, NAs were found to be more phytotoxic in their non-ionized form therefore indicating that they may be taken up through an ion-trap‟ mechanism. However despite this, no significant dissipation of total NAs was observed from planted hydroponic systems. Nevertheless there was a significant change in the distribution (percent abundance) of individual NA families of certain size. These changes were related to the one- and two-ring NA compounds (Z = -2 and Z = -4). Despite not detecting any dissipation of total NAs from the systems, plants were able to reduce the toxicity of a NA system over 30 days by 45% as determined by Daphnia magna acute toxicity bioassays; a 11% greater reduction than unplanted systems.<p> Studies were also conducted investigating the microbial community inhabiting cattail roots exposed to NAs. It was observed that the rhizosphere community changed with NA exposure, with a general increase in potentially pathogenic bacteria and a decrease in bacteria previously found to be beneficial to plant growth. The observed microbial community change could be an indirect effect of the Phytotoxicity experienced by aquatic macrophytes exposed to NAs. Synchrotron-sourced, fourier transform microspectroscopy analysis of root cross sections revealed that there were significant physiological changes to those roots exposed to NAs. These changes were identified as being cell death in the plant root epidermis as well as a change in the chemistry of parenchyma cells in the root pith. It is not known if these changes are a direct effect of NAs to the plant or due to changes of the associated rhizosphere community in the roots or some combination of both these factors.

Platinum mining activities contribute substantially to South Africa's economy since it exceeded gold as economical contributor in 2001. Mining activities contribute to large amounts of waste production in the form of tailings and rock waste, deposited in the surrounding environment of the mine premises. Mining companies are held responsible for damages caused to the surrounding environment. These companies are required to introduce the cost of ecological rehabilitation in their operation costs as well as compile an environmental management plan. Numerous attempts to rehabilitate mine waste have proven unsuccessful. New and improved rehabilitation techniques are required to facilitate in the rehabilitation of these mine spoils. Woodchip-vermicompost produced from platinum mining wastes (woodchips and sewage sludge) was used as an alternative amendment to inorganic fertilisers during the rehabilitation of platinum mine tailings. The effectiveness of the woodchip-vermicompost as an alternative amendment during the platinum mine tailings rehabilitation were monitored using different ecosystem components. A natural veldt in the vicinity of the mine area was randomly selected to serve as a reference site. These ecosystem components selected have previously been shown to be effective as indicators of ecosystem quality. The components selected for this study includes the use of microbial enzymatic activity, microbial community structure, nematode trophic structures, and other mesofaunal groups such as micro-arthropods. The physical and chemical properties of the platinum mine tailings and reference area as well as the vegetation cover of the platinum mine tailings were determined. Statistical and multivariate analyses were use to determine the correlation between the dependent microbial components and dominate independent chemical properties. Nematode trophic structure, Maturity Index, and Plant-Parasitic nematode Index were used to compare the two rehabilitation techniques in terms of nematodes as indicators. Microarthropods family structures were used to compare the two amendments in terms of diversity and abundance. Enzymatic activity was positively affected by the addition of woodchip-vermicompost, than in the sites treated with inorganic fertilisers. The microbial community structure showed no statistically significant (p < 0.05) differences between the two amendments. A higher abundance of nematodes especially plant-parasitic nematodes and bacterivorous nematodes were observed in the woodchip-vermicompost sites than in the inorganic fertilised sites. According to the Maturity Index, both amendments became more enriched during the study period, while the Plant-Parasitic nematode Index showed that the carrying capacity for plantparasitic nematodes on the woodchip-vermicompost sites increased while it decreased in the inorganic fertilised sites, which can be related to the decrease in vegetation cover on the inorganic fertilised sites. Both coloniser (Prostigmata) and persister (Cryptostigmata and Mesostigmata) groups of the micro-arthropods, as well as a higher diversity of micro-arthropods, were present on the woodchip-vermicompost sites whereas the inorganic fertilised sites showed only the presence of colonisers, with a decrease in diversity and abundance of micro-arthropods over the study. The colonisation of micro-arthropods may have been affected by the addition of woodchip-vermicompost and vegetation cover, which contribute to the establishment of suitable microhabitats for these soil biota. By intercorrelating the results, it may be concluded that the addition of woodchip-vermicompost may be an essential part of the rehabilitation process, by contributing to soil organic material to the ecosystem system, which may improve the recolonisation of soil biota and ecosystem processes. However further studies need to be conducted in order to determine the long-term sustainability of the woodchip-vermicompost in providing organic material and sustaining the ecosystem processes. The study also showed the necessity to integrate various ecosystem components when evaluating ecosystem development due to the unique role each component plays and the impact it may have on other components. / Thesis (M. Environmental Science)--North-West University, Potchefstroom Campus, 2006.

Mature fine tailings (MFT), as a mixture of residual bitumen, sand, silt, fine clay particles and water, are a byproduct of oil sands extraction. The large volume, and poor consolidation and water release ability of MFT have been causing significant economic and environmental concerns. Therefore, several studies have been implemented on finding innovative dewatering/disposal techniques. As a result, different methods have been introduced and tested at a laboratory or a field scale, yet very few of these are commercially used in the oil sands industries. Despite the extensive research, an optimal solution has not been found due to the lack of technical or economic feasibility. In the present study, a novel approach that consists of the rapid dewatering of MFT by using a super absorbent polymer (SAP) to produce dense MFT is proposed. A comprehensive laboratory investigation on the geotechnical characteristics and behavior before and after treatment of MFT is conducted. The effects of SAP based dewatering and freeze/thaw cycles on the undrained shear strength of dewatered MFT by using a vane shear apparatus are studied. Furthermore, the ability of recycled SAP to dewater and densify MFT is assessed. Finally, this study provides the results of consolidation and hydraulic conductivity testing to evaluate the void ratio versus effective stress and hydraulic conductivity of MFT. The effects on the behavior and characteristics of MFT after amendment with usage of recycled SAP are also investigated. The results indicate that SAP has the ability to significantly dewater, densify and increase the undrained shear strength of MFT. Furthermore, when subjected to freeze/thaw cycles, the MFT dewatered with SAP shows an additional increase in strength and solid content. It is also found to be possible to regenerate the polymer (still within sachets) through light thermal drying, and the regenerated SAP can still significantly dewater and thus increase the shear strength and solid content of the MFT. In addition, the obtained high solid content affects and improves the compressibility of the material, thus resulting in low initial void ratios. On the other hand, low hydraulic permeability that is derived from low initial void ratios and consolidation is improved by the freeze/thaw process due to the interconnected voids created during the freezing process.