京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第22445号 / 工博第4706号 / 新制||工||1735(附属図書館) / 京都大学大学院工学研究科材料工学専攻 / (主査)教授 宇田 哲也, 教授 田中 功, 教授 安田 秀幸 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 新制・課程博士 / 博士(人間・環境学) / 甲第23281号 / 人博第996号 / 新制||人||235(附属図書館) / 2020||人博||996(吉田南総合図書館) / 京都大学大学院人間・環境学研究科共生文明学専攻 / (主査)教授 増井 正哉, 教授 小方 登, 教授 中嶋 節子, 教授 木下 光 / 学位規則第4条第1項該当 / Doctor of Human and Environmental Studies / Kyoto University / DFAM

In this dissertation, BaTiO3 nanocrystals, Bi4Ti3O12 nanostructured microspheres, and cosubstituted Bi4Ti3O12 nanoparticles and ceramics were prepared using solvothermal, hydrothermal and citrate-gel methods. The ferroelectric properties of the prepared cosubstituted Bi4Ti3O12 ceramics were studied using P–E hysteresis loop, leakage, and polarization fatigue measurements. A two-phase solvothermal synthesis approach for the preparation of hydrophobic BaTiO3 nanocrystals was developed. The two-phase method is based on the growth of nanocrystals at the oil/water interface by the reaction between metal surfactant complexes in the oil phase and a mineralizer in the water phase. Three kind of organic solvents, hexadecene, toluene, and heptane were used as the oil phase and compared to each other with respect to the product quality. The BaTiO3 particles are crystalline with a mean size of 3.7 nm and can be dispersed in a variety of organic solvents forming highly transparent dispersions. A hydrothermal method was developed for the synthesis of Bi4Ti3O12 nanostructured microspheres consisting of granular nanoparticles and nano-platelets. The precursor powder was prepared using a diethylene glycol mediated coprecipitation method. Tailoring of the morphology was achieved by changing the precursor quantity, sodium hydroxide concentration, and reaction time. The formation mechanism of the nanostructured microspheres probably involves aggregation, followed by dissolution and recrystallization. Bi3.25Pr0.75Ti2.97V0.03O12 (BPTV) and Bi3.25La0.75Ti3-xMxO12, (BLTMx, M = Mo, W, Nb, V, x = 0.0–0.12) ferroelectric nanoparticles and ceramics were synthesized using a modified citrate-gel method that has a crystallization temperature as low as 450 °C. The synthesized nanoparticles were spherical ranging from 30 to 100 nm. Except Nb5+, other donor cations were introduced using the corresponding oxides that have advantages in terms of high purity, low cost, and availability. The Bi3.25Pr0.75Ti2.97V0.03O12 ceramic is orthorhombic and its 2Pr and 2Ec values measured at 300 kV/cm were 35 μC/cm2 and 148 kV/cm respectively. The texture, microstructure, and ferroelectric properties of the prepared Bi3.25La0.75Ti3-xMxO12, (BLTMx, M = Mo, W, Nb, V, x = 0.0–0.12) ceramics depend on x. The maximum 2Pr (30–32 μC cm−2) was achieved at an optimum cosubstitution level (x = 0.025 for M6+, x = 0.03 for M5+). The high remanent polarization, low leakage current, and low polarization fatigue render the prepared ceramics promising for practical applications.

京都大学 / 0048 / 新制・課程博士 / 博士(人間・環境学) / 甲第19071号 / 人博第724号 / 新制||人||174(附属図書館) / 26||人博||724(吉田南総合図書館) / 32022 / 京都大学大学院人間・環境学研究科相関環境学専攻 / (主査)教授 内本 喜晴, 教授 田部 勢津久, 准教授 藤原 直樹 / 学位規則第4条第1項該当 / Doctor of Human and Environmental Studies / Kyoto University / DGAM

In this study, several types of modified methods were tried for improving natural fiber reinforced composites and also three kind of natural fibers were used for reinforced composite. Plasma polymerization increased fiber tensile and composites mechanical properties. It is higher effect than alkali treatment. Resin impregnation was expected cheaper method than plasma polymerization. Polyvinyl Alcohol resin impregnation method can increase fiber tensile strength, interfacial shear strength between fiber and composites mechanical properties. And with Bamboo/polypropylene/maleic anhydride polypropylene water absorption ratio also can decrease. / 博士(工学) / Doctor of Philosophy in Engineering / 同志社大学 / Doshisha University

In this thesis, bio-nanocomposites made from two alternative biopolymers and montmorillonite (Mnt) clay have been investigated by molecular modelling. These biopolymers are xyloglucan (XG) and chitosan (CHS), both of which are abundant, renewable, and cost-effective. After being reinforced by Mnt clay nanoparticles, the polymer nanocomposites gains in multifunctionality and in the possibility to register unique combinations of properties, like mechanical, biodegradable, electrical, thermal and gas barrier properties. I apply molecular dynamics (MD) simulations to study the interfacial mechanisms of the adhesion of these biopolymers to the Mnt nanoplatelets at an atomic level. For the XG-Mnt system, a strong binding affinity of XG to a fully hydrated Mnt interface was demonstrated. It was concluded that the dominant driving force for the interfacing is the enthalpy, i.e. the potential energy of the XG-Mnt interacting system. The adsorbed XG favors a flat conformation with a galactose residue in its side chain that facilitates the adsorption of the polymer to the nanoclay.  The XG adsorption was found do depend strongly on the hydration ability of counterions. The binding affinity of XG to Mnt was found to be strongest in the K-Mnt/XG system, followed by, in decreasing order, Na-Mnt/XG, Li-Mnt/XG, and Ca-Mnt/XG. The competing mechanism between ions, water and the XG in the interlayer region was shown to play an important role. The dimensional stability upon moisture exposure, i.e. the ability of a material to resist swelling, is an important parameter for biopolymer-clay nanocomposites. While pure clay swells significantly even at low hydration levels, it is here shown that for the XG-Mnt system, at a hydration level below 50%, the inter-lamellar spacing is well preserved, suggesting a stable material performance. However, at higher hydration levels, the XG-Mnt composite was found to exhibit swelling at the same rate as the pure hydrated Mnt clay. For the CHS-Mnt system, the significant electrostatic interactions from the direct charge-charge attraction between the polymer and the Mnt clay play a key role in the composite formation. Varying the degree of acetylation (DA) and the degree of protonation (DPr) resulted in different effects on the polymer-clay interaction. For the heavily acetylated CHS (DA &gt; 50%, also known as chitin), the strong adhesion of the neutral chitin to the Mnt clay was attributed to strong correlation between the acetyl functional groups and the counterions which act as an electrostatic “glue”. Similarly, the poor adhesion of the fully deprotonated (DPr = 0%) neutral CHS to the clay is attributed to a weak correlation between the amino functional group and the counterions. The stress-strain behavior of the CHS-Mnt composite shows that the mechanical properties are highly affected by the volume fraction of the Mnt clay and the degree of exfoliation of the composite. The material structure has a close relationship to the material properties. Biopolymer-clay nanocomposites hold a bright future to replace petroleum-derived polymer plastics and will become widely used in common life. The theme of the thesis is that further critical improvements of these materials can be accomplished by development of the experimental methods in conjunction with increased understanding of the interactions between polymer, clay, water, ions, solutions in the polymer-clay mixtures provided by molecular modelling. / I denna avhandling har molekylär modellering och molekyldynamisk (MD) simulering använts för att studera modellsystem för bio-nanokompositer bestående av montmorillonit-lera samt två olika sorters biopolymerer – xyloglukan (XG) och kitosan (CHS). Båda dessa polymerer är naturligt förekommande och mycket vanliga. De är dessutom förnyelsebara och kostnadseffektiva. Då polymererna förstärkts med nanopartiklar av montmorillonit får det resulterande kompositmaterialet en unik kombination av egenskaper såsom mekaniska, elektriska, termiska och barriär egenskaper etc. Genom att använda molekyldynamiska (MD) simuleringar, studeras här växelverkan mellan dessa biopolymerer och lernanopartiklar (Mnt) på grundläggande atomistisk detaljnivå. Mellan XG och Mnt i ett fullt hydrerat system kunde stark bindningsaffinitet påvisas. Den dominerande drivkraften för affiniteten var entalpi, d.v.s. potentiell växelverkansenergi. Den adsorberade XG-kedjan antar en platt konformation på ytan. Ett förslag utifrån simuleringsresultaten var att galaktosresidyn i xyloglukanets sidokedja underlättar adsorptionen till lerytan. Simuleringarna kunde också visa att adsorption av XG till Mnt beror starkt på motjonernas hydreringsförmåga. Bindningsaffiniteten mellan XG och Mnt var som starkast i K-Mnt/XG- systemet. Därefter följde, i minskande ordning, Na-Mnt/XG, Li-Mnt/XG och Ca-Mnt/XG. Det kunde visas att strukturen vid gränsytan styrs av konkurrerande mekanismer mellan joner, vatten och XG. Dimensionsstabilitet vid fuktexponering, d.v.s. förmågan hos ett material att motverka svällning, är en viktig egenskap för biopolymer-lernanokompositer. Ren lera sväller signifikant även vid låga fukthalter. Dock kunde MD simuleringar visa att ett modellsystem av XG-Mnt behåller sitt ursprungliga interlamellära avstånd vid hydreringsnivåer under 50%, vilket indikerar ett stabilare material. Vid högre hydrering uppmättes dock svällningen vara densamma som för ren lera. I CHS-Mnt-systemet visade det sig att direkt elektrostatisk växelverkan med signifikant styrka mellan laddningar på polymer och Mnt-yta spelar störst roll för kompositformeringen. Olika effekt på polymer-lerväxelverkan uppnåddes genom att variera acetyleringsgraden (DA) respektive protoneringsgraden (DPr). För den tungt acetylerade CHS-polymeren (DA &gt; 50%, även kallad kitin) visade sig den starka vidhäftningen bero på korrelation mellan acetylgrupperna och motjonerna som i sin tur verkade som ett elektrostatiskt “lim”. På liknande sätt kunde den svaga vidhäftningen mellan fullt deprotonerad (DPr = 0%) neutral CHS och lera förklaras med en betydligt svagare korrelation mellan aminogrupperna och motjonerna. Spänning-töjningsbeteendet hos CHS-Mnt modellen visar att dess mekaniska egenskaper beror kraftigt på volymsandelen Mnt och graden av exfoliering i kompositen. Materialets struktur är nära relaterat till materialegenskaperna. Framtiden för nanokompositer av biopolymerer och lera är ljus då de kan komma att ersätta oljebaserade plaster och användas frekvent i våra dagliga liv. Materialen kommer successivt förbättras genom utveckling av experimentella metoder i kombination med molekylmodellering för ökad förståelse för växelverkan mellan polymer, lera, vatten, joner och lösningsmedel. / 本论文利用分子动力学模拟技术研究了两种备选生物大分子与蒙脱土(Montmorillonite, Mnt)（一种粘土）组成的生物纳米复合材料，分别是木葡聚糖（Xyloglucan, XG）/蒙脱土和壳聚糖(Chitosan, CHS)/蒙脱土。木葡聚糖与壳聚糖都是自然界广泛存在的生物大分子，资源丰富且取材面宽，提取及加工成本低廉，加之可以生物降解并可再生，是优秀的生物复合材料备选原料。经过蒙脱土纳米颗粒加固后，这些基于生物大分子的复合材料将获得多功能且有多种独特特性相结合的优点，比如，更好的力学性能，生物可降解，良好的导电性能，传热性能和屏蔽气体与液体侵扰的能力等等。论文中，我们采用分子动力学模拟的方法着重对生物大分子与蒙脱土在界面上的粘附相互作用机理进行了深入探讨。  首先，对于木葡聚糖/蒙脱土纳米复合材料，我们发现糖分子与土分子间有着很强的天然亲和力。研究证明它们之间的这种相互作用，热焓是主要的推动力，也就是糖和土分子间的相互作用势能。含有半乳糖残基的木葡聚糖分子（本文中亦称天然木葡聚糖分子）吸附到粘土表面后，分子构型呈现扁平状，半乳糖残基似有辅助木葡聚糖大分子吸附到粘土颗粒上的作用。  进一步研究发现，木葡聚糖分子在粘土表面上的吸附与溶液中抗衡离子的水和作用密切相关。在钾离子平衡的糖/粘土系统中，糖分子与土分子的相互作用最强，钠离子平衡的糖/粘土系统次之，紧接着是锂离子平衡的糖/粘土系统，最弱的是钙离子平衡的糖/粘土系统。研究发现，离子，水分子，以及糖分子在粘土层间的竞争机制在糖分子的粘附过程中起着重要的作用。  材料暴露于潮湿环境中的尺寸稳定性，也就是材料抗肿胀的能力是生物大分子/蒙脱土所构成的复合材料的重要参数。蒙脱土自身即使在很低的潮湿环境下就会有明显地膨胀现象，然而，对木葡聚糖/蒙脱土复合材料来说，尺寸稳定性可以在水和值低于50%以下有效保存。其夹层尺寸的稳定保持暗示了材料在这个程度的潮湿环境下的稳定性。然而，当水和值高于50%时，木葡聚糖/蒙脱土复合材料将出现明显的肿胀现象，表现在夹层尺寸的明显增大，且其膨胀速率与粘土自身的膨胀速率逐渐趋于相当水平。  其次，对于壳聚糖/蒙脱土复合材料，我们发现由电荷-电荷间直接产生地强烈的静电吸引作用是壳聚糖分子与蒙脱土分子相互粘附并构成复合材料的关键因素。通过改变壳聚糖分子的乙酰化程度（Degree of acetylation, DA）和质子化程度(Degree of protonation, DPr)，糖分子与土分子的相互作用有着显著地不同。对于乙酰化程度（DA）高于50%的壳聚糖分子（亦成为甲壳素分子chitin, CHT），电中性的甲壳素分子与土分子间的强吸附作用源于乙酰基功能团与抗衡离子的强相关性。抗衡离子此时扮演着类似于“电子胶”的作用，可以有效地将电中性的甲壳素分子与土分子粘结在一起。类似地，当质子化程度最低时，亦即壳聚糖分子完全非质子化，即呈现电中性时，较差的糖/土吸附作用源于氨基功能团与抗衡离子的较弱的相关性。  进一步对壳聚糖/蒙脱土复合材料的分子系统进行应力应变计算发现，复合材料的力学性能直接受蒙脱土体积分数和其剥离程度的影响，通常，粘土的体积分数越大体系的力学性能越高，且剥离程度对材料的整体性能也有直接影响。因此，材料的结构与其性能的表征有着密切联系。  我们相信生物大分子与蒙脱土构成的生物复合材料有着光明的前景，可以取代石油提取物制成的塑料材料，并将能够广泛应用在日常生活中。通过实验技术的改善和应用分子模拟技术对复合材料体系中生物大分子，蒙脱土分子，水分子，离子，溶液环境等混合物质相互作用的理解增加，这种可再生的新材料将会得到重要改进，这也是整本论文的主旋律。 / <p>QC 20150520</p> / Bio-nanocomposites

科学研究費補助金 研究種目:一般研究(B) 課題番号:61470056 研究代表者:浅井 滋生 研究期間:1986-1987年度

科学研究費補助金 研究種目:基盤研究(B)(2) 課題番号:07455052 研究代表者:田中 啓介 研究期間:1995-1996年度

科学研究費補助金 研究種目:基盤研究(B)(2) 課題番号:09450047 研究代表者:田中 啓介 研究期間:1997-1999年度

熱可塑性エポキシ樹脂を母材とするCFRTPの母材を高分子量化することにより静的および疲労特性の改善を行えることを示し，重量平均分子量の違いによりそれらの特性が大きく変化する変曲点が存在することを明らかにした．さらに，CFRTPの実用化のためにミシンステッチを利用したCFRTPテープ積層法を提案し，その試作機を作成することで，CFRTPテープ自動積層装置の実用性を明らかにした． / 博士(工学) / Doctor of Philosophy in Engineering / 同志社大学 / Doshisha University