The aim of this work is to create a 3D models of the structures of data acquired by laser scanning. The tracking data are elaborated by software Scene and models were created in AutoCAD, Revit and SketchUP. The main output of this work are three models of the two structures.

This thesis deals with the creation of a parametric 3D city model based on available spatial data.. The content is divided into two parts. The theoretical part describes the current state of 3D modeling and the second part describes the process of creating the final model and its conversion to CityGML.

The subject of this diploma thesis was geodetic survey of the object Strejcův sbor in Židlochovice and its following post processing, including making of building drawings and 3D model. In the introduction is the thesis informing about the object of interest and locality. Following chapters describes data collecting, its post processing and drawings and 3D model creating. The results are used as a documentation for purpose of reconstruction.

The aim of the diploma thesis is to create a 3D model of the given object using laser scanning technology. Subsequent adjustments of the model and its separate preparation for possible 3D printing will be done through appropriate programs. The next 3D model of the identical object will be made based on the created photos and will be edited and prepared in the same way for possible 3D printing.

The goal of this work is modelling and design of an inverted pendulum prototype. The work presents a mathematical model of a rotary pendulum, modelling of a BLDC motors and also a 3D model of the pendulum prototype is present. The work mentions design of the state space controller and swing up control of the inverted pendulum. Dynamics obtained from the mathematical model is used to create a 3D dynamic model of a pendulum, with the use of the Simscape toolbox. The work deals with control of a BLDC motors with use of vector control. The algorithm is implemented on the CompactRIO platform. Later, hardware is developed, containing STMicroelectronis microcontroller, capable of replacing the CompactRIO platform.

The main goal of the master thesis is an evaluation of a software package Smap 3D Plant Design in design of evaporation technology, specifically 3D of the pipeline network and its subsequent documentation. The thesis describes evaporation technology in general, then the evaporator testing site in Laboratory of Energy Intensive Processes in NETME Centre is presented, where pipeline network needs to be designed. In the next part a reference 3D model was created as well as a documentation using SolidWorks routing. Subsequently, an equivalent 3D model was created using Smap 3D Plant Design – Piping and a documentation was created using Smap 3D Plant Design – Isometric. Finally, these two methods of creating pipeline were compared to each other, and recommended method was chosen.

This diploma thesis deals with the possibilities of using 3D modeling in electronic commerce. It describes the theoretical basis and methods of 3D modeling, which is used. Includes description of the current state in electronic presentation, the description of the advantages and disadvantages these procedures, as well as practical implementation of 3D model.

The subject of this diploma thesis is the creating 3D model and building plans of the main building of the hospice in Rajhrad. The first part includes information about locality and description of surveying. The following section is devoted to 3D modeling in AutoCAD, and creation of the specific model. Last part of the thesis deals with the procedure for creating building plans and testing accuracy. All outputs of this work will serve for an increasing efficiency of management of this building owned by the Regional charity Rajhrad.

The object of this work is design model of ball joint and define boundary conditions for real condition representation as most exact as possible. Then set parameters of test in TRW-DAS, a.s. for prevention of reacceleration with change of failure mode. Summary of ball joints, their testing and accelerated tests is in the beginning of the work. Next part describes ball joint creation in Pro/Engineer, transfer to Ansys, preparing to solution, fatigue test evaluation and comparing with create model.

This master´s thesis deals with design modification of specific upright in response to exchange the caliper for non-series one. It focuses on the creation and subsequent adjustment of the 3D model based on obtained size and shape of real upright by using 3D scan. For the editing part is conducted the strength test by using FEM and the results are compared with the values of the original upright.