Traditionally the Internet is used for the following applications: FTP, e-mail and Web traffic. However in the recent years the Internet is increasingly supporting emerging applications such as IP telephony, video conferencing and online games. These new applications have different requirements in terms of throughput and delay than traditional applications. For example, interactive multimedia applications, unlike traditional applications, have more strict delay constraints and less strict loss constraints. Unfortunately, the current Internet offers only a best-effort service to all applications without any consideration to the applications specific requirements. In this thesis three existing Active Queue Management (AQM) mechanisms are modified by incorporating into these a control function to condition routers for better Quality of Service (QoS). Specifically, delay is considered as the key QoS metric as it is the most important metric for real-time multimedia applications. The first modified mechanism is Drop Tail (DT), which is a simple mechanism in comparison with most AQM schemes. A dynamic threshold has been added to DT in order to maintain packet queueing delay at a specified value. The modified mechanism is referred to as Adaptive Drop Tail (ADT). The second mechanism considered is Early Random Drop (ERD) and, iii in a similar way to ADT, a dynamic threshold has been used to keep the delay at a required value, the main difference being that packets are now dropped probabilistically before the queue reaches full capacity. This mechanism is referred to as Adaptive Early Random Drop (AERD). The final mechanism considered is motivated by the well known Random Early Detection AQM mechanism and is effectively a multi-threshold version of AERD in which packets are dropped with a linear function between the two thresholds and the second threshold is moveable in order to change the slope of the dropping function. This mechanism is called Multi Threshold Adaptive Early Random Drop (MTAERD) and is used in a similar way to the other mechanisms to maintain delay around a specified level. The main focus with all the mechanisms is on queueing delay, which is a significant component of end-to-end delay, and also on reducing the jitter (delay variation) A control algorithm is developed using an analytical model that specifies the delay as a function of the queue threshold position and this function has been used in a simulation to adjust the threshold to an effective value to maintain the delay around a specified value as the packet arrival rate changes over time. iv A two state Markov Modulated Poisson Process is used as the arrival process to each of the three systems to introduce burstiness and correlation of the packet inter-arrival times and to present sudden changes in the arrival process as might be encountered when TCP is used as the transport protocol and step changes the size of its congestion window. In the investigations it is assumed the traffic source is a mixture of TCP and UDP traffic and that the mechanisms conserved apply to the TCP based data. It is also assumed that this consists of the majority proportion of the total traffic so that the control mechanisms have a significant effect on controlling the overall delay. The three mechanisms are evaluated using a Java framework and results are presented showing the amount of improvement in QoS that can be achieved by the mechanisms over their non-adaptive counterparts. The mechanisms are also compared with each other and conclusions drawn.

This thesis uses a modern control approach to address the Internet traffic control issues in the Transport Layer. Through literature review, we are interested in using the H2/H∞ formulation to obtain the good transient performance of an H2 controller and the good robust property from an H∞ controller while avoiding their deficiencies. The H2/H∞ controller is designed by formulating an optimization problem using the H2-norm and the H∞-norm of the system, which can be solved by an LMI approach using MATLAB. Our design starts with the modeling of a router and the control system by augmenting the network plant function with the Sensitivity function S, the Complementary Sensitivity function T and the Input Sensitivity function U. These sensitivity functions along with their weight functions are used to monitor the closed-loop dynamics of the traffic control. By choosing different combinations of the sensitivity functions, we can obtain the SU, the ST and the STU controllers. Both the window-based and rate-based version of these different types of H2/H∞ controllers have been designed and investigated. We have also proved that these controllers are stable using Lyapunov’s First Method. Next, we verify the performance of the controllers by OPNET simulation using different performance measures of queue length, throughput, queueing delay, packet loss rate and goodput. Our performance evaluation via simulation has demonstrated the robustness and the better transient response such as the rise/fall time and the peak queue value. We have also investigated the controller performances subject to network dynamics as well as through comparison with other controllers. Finally, we have improved these controllers for real-time application. They are capable to update/renew the controller in a short time whenever new network parameter values are detected so that the optimum performance can be maintained.

Traditionally the Internet is used for the following applications: FTP, e-mail and Web traffic. However in the recent years the Internet is increasingly supporting emerging applications such as IP telephony, video conferencing and online games. These new applications have different requirements in terms of throughput and delay than traditional applications. For example, interactive multimedia applications, unlike traditional applications, have more strict delay constraints and less strict loss constraints. Unfortunately, the current Internet offers only a best-effort service to all applications without any consideration to the applications specific requirements. In this thesis three existing Active Queue Management (AQM) mechanisms are modified by incorporating into these a control function to condition routers for better Quality of Service (QoS). Specifically, delay is considered as the key QoS metric as it is the most important metric for real-time multimedia applications. The first modified mechanism is Drop Tail (DT), which is a simple mechanism in comparison with most AQM schemes. A dynamic threshold has been added to DT in order to maintain packet queueing delay at a specified value. The modified mechanism is referred to as Adaptive Drop Tail (ADT). The second mechanism considered is Early Random Drop (ERD) and, iii in a similar way to ADT, a dynamic threshold has been used to keep the delay at a required value, the main difference being that packets are now dropped probabilistically before the queue reaches full capacity. This mechanism is referred to as Adaptive Early Random Drop (AERD). The final mechanism considered is motivated by the well known Random Early Detection AQM mechanism and is effectively a multi-threshold version of AERD in which packets are dropped with a linear function between the two thresholds and the second threshold is moveable in order to change the slope of the dropping function. This mechanism is called Multi Threshold Adaptive Early Random Drop (MTAERD) and is used in a similar way to the other mechanisms to maintain delay around a specified level. The main focus with all the mechanisms is on queueing delay, which is a significant component of end-to-end delay, and also on reducing the jitter (delay variation) A control algorithm is developed using an analytical model that specifies the delay as a function of the queue threshold position and this function has been used in a simulation to adjust the threshold to an effective value to maintain the delay around a specified value as the packet arrival rate changes over time. iv A two state Markov Modulated Poisson Process is used as the arrival process to each of the three systems to introduce burstiness and correlation of the packet inter-arrival times and to present sudden changes in the arrival process as might be encountered when TCP is used as the transport protocol and step changes the size of its congestion window. In the investigations it is assumed the traffic source is a mixture of TCP and UDP traffic and that the mechanisms conserved apply to the TCP based data. It is also assumed that this consists of the majority proportion of the total traffic so that the control mechanisms have a significant effect on controlling the overall delay. The three mechanisms are evaluated using a Java framework and results are presented showing the amount of improvement in QoS that can be achieved by the mechanisms over their non-adaptive counterparts. The mechanisms are also compared with each other and conclusions drawn.

Active Queue Management (AQM) schemes are used for ensuring the Quality of Service (QoS) in telecommunication networks. However, they are sensitive to parameter settings and have weaknesses in detecting and controlling congestion under dynamically changing network situations. Another drawback for the AQM algorithms is that they have been applied only on the Markovian models which are considered as Short Range Dependent (SRD) traffic models. However, traffic measurements from communication networks have shown that network traffic can exhibit self-similar as well as Long Range Dependent (LRD) properties. Therefore, it is important to design new algorithms not only to control congestion but also to have the ability to predict the onset of congestion within a network. An aim of this research is to devise some new congestion control methods for communication networks that make use of various traffic characteristics, such as LRD, which has not previously been employed in congestion control methods currently used in the Internet. A queueing model with a number of ON/OFF sources has been used and this incorporates a novel congestion prediction algorithm for AQM. The simulation results have shown that applying the algorithm can provide better performance than an equivalent system without the prediction. Modifying the algorithm by the inclusion of a sliding window mechanism has been shown to further improve the performance in terms of controlling the total number of packets within the system and improving the throughput. Also considered is the important problem of maintaining QoS constraints, such as mean delay, which is crucially important in providing satisfactory transmission of real-time services over multi-service networks like the Internet and which were not originally designed for this purpose. An algorithm has been developed to provide a control strategy that operates on a buffer which incorporates a moveable threshold. The algorithm has been developed to control the mean delay by dynamically adjusting the threshold, which, in turn, controls the effective arrival rate by randomly dropping packets. This work has been carried out using a mixture of computer simulation and analytical modelling. The performance of the new methods that have.

"The Internet has assumed the role of the underlying communication network for applications such as file transfer, electronic mail, Web browsing and multimedia streaming. Multimedia streaming, in particular, is growing with the growth in power and connectivity of today's computers. These Internet applications have a variety of network service requirements and traffic characteristics, which presents new challenges to the single best-effort service of today's Internet. TCP, the de facto Internet transport protocol, has been successful in satisfying the needs of traditional Internet applications, but fails to satisfy the increasingly popular delay sensitive multimedia applications. Streaming applications often use UDP without a proper congestion avoidance mechanisms, threatening the well-being of the Internet. This dissertation presents an IP router traffic management mechanism, referred to as Crimson, that can be seamlessly deployed in the current Internet to protect well-behaving traffic from misbehaving traffic and support Quality of Service (QoS) requirements of delay sensitive multimedia applications as well as traditional Internet applications. In addition, as a means to enhance Internet support for multimedia streaming, this dissertation report presents design and evaluation of a TCP-Friendly and streaming-friendly transport protocol called the Multimedia Transport Protocol (MTP). Through a simulation study this report shows the Crimson network efficiently handles network congestion and minimizes queuing delay while providing affordable fairness protection from misbehaving flows over a wide range of traffic conditions. In addition, our results show that MTP offers streaming performance comparable to that provided by UDP, while doing so under a TCP-Friendly rate."

Active Queue Management (AQM) schemes are used for ensuring the Quality of Service (QoS) in telecommunication networks. However, they are sensitive to parameter settings and have weaknesses in detecting and controlling congestion under dynamically changing network situations. Another drawback for the AQM algorithms is that they have been applied only on the Markovian models which are considered as Short Range Dependent (SRD) traffic models. However, traffic measurements from communication networks have shown that network traffic can exhibit self-similar as well as Long Range Dependent (LRD) properties. Therefore, it is important to design new algorithms not only to control congestion but also to have the ability to predict the onset of congestion within a network. An aim of this research is to devise some new congestion control methods for communication networks that make use of various traffic characteristics, such as LRD, which has not previously been employed in congestion control methods currently used in the Internet. A queueing model with a number of ON/OFF sources has been used and this incorporates a novel congestion prediction algorithm for AQM. The simulation results have shown that applying the algorithm can provide better performance than an equivalent system without the prediction. Modifying the algorithm by the inclusion of a sliding window mechanism has been shown to further improve the performance in terms of controlling the total number of packets within the system and improving the throughput. Also considered is the important problem of maintaining QoS constraints, such as mean delay, which is crucially important in providing satisfactory transmission of real-time services over multi-service networks like the Internet and which were not originally designed for this purpose. An algorithm has been developed to provide a control strategy that operates on a buffer which incorporates a moveable threshold. The algorithm has been developed to control the mean delay by dynamically adjusting the threshold, which, in turn, controls the effective arrival rate by randomly dropping packets. This work has been carried out using a mixture of computer simulation and analytical modelling. The performance of the new methods that have / Ministry of Higher Education in Egypt and the Egyptian Cultural Centre and Educational Bureau in London

Orientador: Nelson Luis Saldanha da Fonseca / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Computação / Made available in DSpace on 2018-08-13T10:35:13Z (GMT). No. of bitstreams: 1 Santi_Julianade_M.pdf: 1658984 bytes, checksum: 8a9f078587406a06815484e4fe057f7d (MD5) Previous issue date: 2008 / Resumo: A utilização eficiente da banda passante em redes de alta velocidade e grandes atrasos, denominadas redes com produto banda-atraso elevado (PBA), tornou-se um grande desafio. Isto ocorre devido aos ajustes do protocolo Transmission Control Protocol (TCP). O High Speed TCP (HSTCP), uma variante do TCP para redes com PBA elevado, emprega ajustes mais agressivos permitindo, assim, que a utilização da banda seja escalável. As políticas de Gerenciamento Ativo de Filas ou Active Queue Management (AQM), monitoram o nível de ocupação das filas nos roteadores e notificam o congestionamento incipiente aos emissores TCP através do descarte/marcação de pacotes. O sistema de controle de congestionamento apresenta natureza de retroalimentação, na qual a taxa de transmissão dos nós fontes é ajustada em função do nível de ocupação da fila. Os controladores AQM determinam a probabilidade de descarte/marcação para maximizar a vazão e minimizar perdas, garantindo, assim, a estabilidade do tamanho da fila independentemente das variações das condições da rede. Neste trabalho, define-se a política de gerenciamento ativo de filas HSTCP-H2 para redes com PBA elevado que utilizam o protocolo HSTCP. Para a derivação de HSTCP­H2: são utilizadas técnicas de Teoria de Controle Ótimo. A principal característica desta política é considerar o atraso do sistema o que permite melhor utilização dos recursos disponíveis. A estabilidade e os objetivos de desempenho do sistema são expressos e solu­cionados através de Desigualdades Matriciais Lineares, permitindo que os parâmetros do controlador possam ser calculados através da solução de um problema convexo simples. Diferentes controladores foram derivados considerando-se diferentes objetivos de de­sempenho, os quais consideram as características de redes com produto banda-atraso elevado. Através de simulações, os desempenhos dos controladores derivados são avalia­dos e a eficácia do controlador que apresentou o melhor desempenho foi comparado com o desempenho da política de AQM RED. São considerados cenários com enlace gargalo único e com múltiplos gargalos. / Abstract: The efficient utilization of bandwidth in high speed and large delay networks, called high bandwidth-delay product networks (BDP), has become a major challenge. This is due to adjustments of the Transmission Control Protocol (TCP). The High Speed TCP HSTCP): a TCP variant to high BDP networks, employs more aggressive adjustments, allowing scalable bandwidth utilization. The Active Queue Management (AQM) policies monitor the queue length in the routers and notify incipient congestion to TCP source by marking or dropping packets. The congestion control system presents intrinsic feedback nature, where the transmission rates of the sources are adjusted according to the level of congestion inferred by the queue occupancy. The AQM controllers determine the dropping marking probability values to maximize throughput and minimize losses, giving guarantees to stabilize the queue length independent of network conditions. In this work, it is defined HSTCP-H2, an active queue management policy to high BDP networks, which adopt the HSTCP as their transport protocol. Optimal control theory is used to conceive HSTCP-H2. The novelty of the proposed approach lies in consider the delay of the system which allows better use of available resources. Furthermore, in the proposed approach, stability and performance objectives are completely expressed as Linear Matrix Inequalities (LMIs), thus requiring the solution of a single convex problem for the computation of the controller parameters. Different controllers are derived considering different design goals, which take into ac­count the characteristics of the high bandwidth-delay product networks. The performance produced by different optimal controllers was investigated. The efficacy of the control­ler with the best performance was then compared to the performance of RED policy. The simulation experiments were carried out using topologies with single and multiple bottleneck. / Mestrado / Redes de Computadores / Mestre em Ciência da Computação

Along with playing an ever-increasing role in the integration of other communication networks and expanding in application diversities, the current Internet suffers from serious overuse and congestion bottlenecks. Efficient congestion control is fundamental to ensure the Internet reliability, satisfy the specified Quality-of-Service (QoS) constraints and achieve desirable performance in response to varying application scenarios. Active Queue Management (AQM) is a promising scheme to support end-to-end Transmission Control Protocol (TCP) congestion control because it enables the sender to react appropriately to the real network situation. Analytical performance models are powerful tools which can be adopted to investigate optimal setting of AQM parameters. Among the existing research efforts in this field, however, there is a current lack of analytical models that can be viewed as a cost-effective performance evaluation tool for AQM in the presence of heterogeneous traffic, generated by various network applications. This thesis aims to provide a generic and extensible analytical framework for analyzing AQM congestion control for various traffic types, such as non-bursty Poisson and bursty Markov-Modulated Poisson Process (MMPP) traffic. Specifically, the Markov analytical models are developed for AQM congestion control scheme coupled with queue thresholds and then are adopted to derive expressions for important QoS metrics. The main contributions of this thesis are listed as follows: • Study the queueing systems for modeling AQM scheme subject to single-class and multiple-classes Poisson traffic, respectively. Analyze the effects of the varying threshold, mean traffic arrival rate, service rate and buffer capacity on the key performance metrics. • Propose an analytical model for AQM scheme with single class bursty traffic and investigate how burstiness and correlations affect the performance metrics. The analytical results reveal that high burstiness and correlation can result in significant degradation of AQM performance, such as increased queueing delay and packet loss probability, and reduced throughput and utlization. • Develop an analytical model for a single server queueing system with AQM in the presence of heterogeneous traffic and evaluate the aggregate and marginal performance subject to different threshold values, burstiness degree and correlation. • Conduct stochastic analysis of a single-server system with single-queue and multiple-queues, respectively, for AQM scheme in the presence of multiple priority traffic classes scheduled by the Priority Resume (PR) policy. • Carry out the performance comparison of AQM with PR and First-In First-Out (FIFO) scheme and compare the performance of AQM with single PR priority queue and multiple priority queues, respectively.

Along with playing an ever-increasing role in the integration of other communication networks and expanding in application diversities, the current Internet suffers from serious overuse and congestion bottlenecks. Efficient congestion control is fundamental to ensure the Internet reliability, satisfy the specified Quality-of-Service (QoS) constraints and achieve desirable performance in response to varying application scenarios. Active Queue Management (AQM) is a promising scheme to support end-to-end Transmission Control Protocol (TCP) congestion control because it enables the sender to react appropriately to the real network situation. Analytical performance models are powerful tools which can be adopted to investigate optimal setting of AQM parameters. Among the existing research efforts in this field, however, there is a current lack of analytical models that can be viewed as a cost-effective performance evaluation tool for AQM in the presence of heterogeneous traffic, generated by various network applications. This thesis aims to provide a generic and extensible analytical framework for analyzing AQM congestion control for various traffic types, such as non-bursty Poisson and bursty Markov-Modulated Poisson Process (MMPP) traffic. Specifically, the Markov analytical models are developed for AQM congestion control scheme coupled with queue thresholds and then are adopted to derive expressions for important QoS metrics. The main contributions of this thesis are listed as follows: iii ¿ Study the queueing systems for modeling AQM scheme subject to single-class and multiple-classes Poisson traffic, respectively. Analyze the effects of the varying threshold, mean traffic arrival rate, service rate and buffer capacity on the key performance metrics. ¿ Propose an analytical model for AQM scheme with single class bursty traffic and investigate how burstiness and correlations affect the performance metrics. The analytical results reveal that high burstiness and correlation can result in significant degradation of AQM performance, such as increased queueing delay and packet loss probability, and reduced throughput and utlization. ¿ Develop an analytical model for a single server queueing system with AQM in the presence of heterogeneous traffic and evaluate the aggregate and marginal performance subject to different threshold values, burstiness degree and correlation. ¿ Conduct stochastic analysis of a single-server system with single-queue and multiple-queues, respectively, for AQM scheme in the presence of multiple priority traffic classes scheduled by the Priority Resume (PR) policy. ¿ Carry out the performance comparison of AQM with PR and First-In First-Out (FIFO) scheme and compare the performance of AQM with single PR priority queue and multiple priority queues, respectively.