1 |
Surtos atmosféricos transferidos à rede secundária via transformador. / Lightning surges transferred by transformer to low voltage network.Obase, Paulo Futoshi 14 December 2004 (has links)
As descargas atmosféricas estão entre as principais causas de distúrbios nos sistemas elétricos, provocando sobretensões e ocasionando uma parcela significativa das interrupções não programadas. Tais distúrbios são cada vez mais percebidos pelos consumidores, ocasionando desde o mau funcionamento até a queima de aparelhos e equipamentos eletro-eletrônicos residenciais, comerciais e industriais. Antigamente eletromecânicos, tais aparelhos são atualmente, em grande parte, produzidos com componentes semicondutores, o que os torna mais sensíveis a interferências. As descargas atmosféricas também apresentam um agravante de, salvo raras exceções, não serem registradas nos bancos de dados das concessionárias, ao contrário das operações de manobra, faltas e variações de carga na rede de distribuição. Essa situação contribui para os conflitos cada vez mais freqüentes entre consumidores e empresas de energia a respeito dos pedidos de indenização por danos em aparelhos elétricos (PID). Dada a relevância do tema, muitos estudos têm sido realizados ao longo dos últimos anos, sem entretanto esclarecer todos os aspectos necessários para a minimização desses problemas. Neste trabalho são avaliadas as amplitudes e formas de onda das sobretensões transferidas à rede de baixa tensão via transformador quando da ocorrência de surtos no primário. Esses surtos podem ser oriundos de descargas diretas na rede primária ou decorrentes de descargas em suas proximidades. O estudo visa a obtenção de informações tendo em vista a melhoria do desempenho das redes de distribuição e conseqüentemente a minimização dos danos causados aos consumidores. Nas simulações, realizadas através do programa ATP (Alternative Transients Program"), são consideradas linhas com configurações típicas, bem como modelos de comprovada validade para representação dos isoladores de média e de baixa tensão e do transformador de distribuição. O trabalho analisa a influência, nas sobretensões, de diversos parâmetros, como por exemplo amplitude e forma de onda da corrente da descarga, ponto da incidência da descarga, resistência de terra e presença de dispositivos de proteção contra surtos. Os resultados apresentados constituem-se em importantes subsídios para a definição de critérios de instalação de dispositivos de proteção contra surtos em redes de baixa tensão. / Lightning discharges are among the main causes of disturbances in electrical systems, causing overvoltages and leading to a significant portion of unscheduled interruptions. Such disturbances are increasingly noticed by consumers, causing from malfunction to the burnt-out of electrical-electronic devices and equipment in homes, businesses and industries. Formerly electromechanical, such devices currently are, in their majority, produced with semiconductors, what makes them more sensitive to interferences. Lightning discharges also present the aggravation of not being recorded in power suppliers databases, but for seldom exceptions, as opposed to switching operations, failures and charge variations in the distribution network. This situation contributes for the increasingly frequent conflicts among consumers and power companies regarding indemnity claims due to damages to electrical devices. Given the subjects significance, many studies have been conducted along the past years, not explaining, however, all the aspects required to minimize those problems. On this work, the amplitudes and waveforms of overvoltages on medium and low voltage lines are evaluated upon the incidence of direct discharges on the primary. The voltages transferred to the low voltage side are also evaluated in case of strikes in the vicinity of the line. The study intends to obtain information in order to achieve a performance improvement of distribution networks and, as a consequence, the reduction of damages to consumers to a minimum. In the simulations conducted through ATP (Alternative Transients Program"), lines with typical configurations are considered and models of proven validity are used to represent the low and medium voltage insulators and the distribution transformer. The work analyses the effect of several parameters on the overvoltages, such as amplitude and waveform of the stroke current, lightning strike point, grounding resistance and existence of surge protective devices. The results presented constitute an important foundation to define the installation criteria of surge protective devices on low voltage networks.
|
2 |
Surtos atmosféricos transferidos à rede secundária via transformador. / Lightning surges transferred by transformer to low voltage network.Paulo Futoshi Obase 14 December 2004 (has links)
As descargas atmosféricas estão entre as principais causas de distúrbios nos sistemas elétricos, provocando sobretensões e ocasionando uma parcela significativa das interrupções não programadas. Tais distúrbios são cada vez mais percebidos pelos consumidores, ocasionando desde o mau funcionamento até a queima de aparelhos e equipamentos eletro-eletrônicos residenciais, comerciais e industriais. Antigamente eletromecânicos, tais aparelhos são atualmente, em grande parte, produzidos com componentes semicondutores, o que os torna mais sensíveis a interferências. As descargas atmosféricas também apresentam um agravante de, salvo raras exceções, não serem registradas nos bancos de dados das concessionárias, ao contrário das operações de manobra, faltas e variações de carga na rede de distribuição. Essa situação contribui para os conflitos cada vez mais freqüentes entre consumidores e empresas de energia a respeito dos pedidos de indenização por danos em aparelhos elétricos (PID). Dada a relevância do tema, muitos estudos têm sido realizados ao longo dos últimos anos, sem entretanto esclarecer todos os aspectos necessários para a minimização desses problemas. Neste trabalho são avaliadas as amplitudes e formas de onda das sobretensões transferidas à rede de baixa tensão via transformador quando da ocorrência de surtos no primário. Esses surtos podem ser oriundos de descargas diretas na rede primária ou decorrentes de descargas em suas proximidades. O estudo visa a obtenção de informações tendo em vista a melhoria do desempenho das redes de distribuição e conseqüentemente a minimização dos danos causados aos consumidores. Nas simulações, realizadas através do programa ATP (Alternative Transients Program), são consideradas linhas com configurações típicas, bem como modelos de comprovada validade para representação dos isoladores de média e de baixa tensão e do transformador de distribuição. O trabalho analisa a influência, nas sobretensões, de diversos parâmetros, como por exemplo amplitude e forma de onda da corrente da descarga, ponto da incidência da descarga, resistência de terra e presença de dispositivos de proteção contra surtos. Os resultados apresentados constituem-se em importantes subsídios para a definição de critérios de instalação de dispositivos de proteção contra surtos em redes de baixa tensão. / Lightning discharges are among the main causes of disturbances in electrical systems, causing overvoltages and leading to a significant portion of unscheduled interruptions. Such disturbances are increasingly noticed by consumers, causing from malfunction to the burnt-out of electrical-electronic devices and equipment in homes, businesses and industries. Formerly electromechanical, such devices currently are, in their majority, produced with semiconductors, what makes them more sensitive to interferences. Lightning discharges also present the aggravation of not being recorded in power suppliers databases, but for seldom exceptions, as opposed to switching operations, failures and charge variations in the distribution network. This situation contributes for the increasingly frequent conflicts among consumers and power companies regarding indemnity claims due to damages to electrical devices. Given the subjects significance, many studies have been conducted along the past years, not explaining, however, all the aspects required to minimize those problems. On this work, the amplitudes and waveforms of overvoltages on medium and low voltage lines are evaluated upon the incidence of direct discharges on the primary. The voltages transferred to the low voltage side are also evaluated in case of strikes in the vicinity of the line. The study intends to obtain information in order to achieve a performance improvement of distribution networks and, as a consequence, the reduction of damages to consumers to a minimum. In the simulations conducted through ATP (Alternative Transients Program), lines with typical configurations are considered and models of proven validity are used to represent the low and medium voltage insulators and the distribution transformer. The work analyses the effect of several parameters on the overvoltages, such as amplitude and waveform of the stroke current, lightning strike point, grounding resistance and existence of surge protective devices. The results presented constitute an important foundation to define the installation criteria of surge protective devices on low voltage networks.
|
3 |
Desenvolvimento de um software pré-processador gráfico para análise de transitórios em subestações / Development of a graphics pre-processor software for transient analysis in substationsMarchesan, Adriano Cavalheiro 22 March 2016 (has links)
The following work presents a graphical pre-processor software as an alternative version of
the Electromagnetic Transients Program (ATP-EMTP). It was developed to aid in the analysis
of electromagnetic transients in power substations. The software has been developed using
Java programming language and it was named Alternative Transients Program Substation
Analysis (ATP-SA). Amongst its functionalities, it can be highlighted the representation of
precursory events of electromagnetic transients in the ATP-EMTP standard, data predefinition
for the modeling of these events, simulation configuration with compatible values in reference
to the transient phenomena to be studied and management simulation through a databank. The
transients to be considered are: occurrence and clearance of faults, transformer inrush, Transient
Recovery Voltage (TRV) in circuit-breakers, circuit-breaker switching and lightning surges. The
software aids in the simulation of transients occurred by these events in both deterministic and
stochastic ways. In addition, to show its potentialities, examples of application are presented in a
real power system simulations. Hence, with the use of the mentioned software, it is expected
to support in subsidies and safety with respect of operations in substations, as well to aid in
defect prevention, loss of equipment and potential shutdowns. This work is the main theme
of a Research and Development (R&D) project developed by the Laboratory of Analysis and
Protection of Power Systems, in the Power System and Energy Research Center, in a partnership
along with the State Company of Generation and Transmission of Electric Energy of the Rio
Grande do Sul State. / Este trabalho apresenta a implementação de um software pré-processador gráfico para a versão
alternativa do ElectroMagnetic Transient Program (ATP-EMTP), desenvolvido para auxiliar a
análise de transitórios eletromagnéticos em subestações de potência. Este software, concebido
em linguagem de programação Java, recebeu a denominação de Alternative Transients Program
Substation Analysis (ATP-SA). Dentre suas funcionalidades, está a representação de eventos
precursores de transitórios eletromagnéticos no padrão ATP-EMTP, predefinição de dados
para modelagem destes eventos, parametrização da simulação com valores compatíveis com
o fenômeno analisado e gerenciamento de simulações através de um banco de dados. Os
eventos contemplados pelo software compreendem: ocorrência e eliminação de curtos-circuitos,
energização de transformador, Tensão de Restabelecimento Transitória (TRT) em disjuntores,
manobras de abertura e fechamento de disjuntores e descargas atmosféricas. O software fornece
suporte a simulação de transitórios provocados por estes eventos de forma determinística ou
estocástica. Para demonstrar estas potencialidades, abordam-se exemplos aplicados sobre um
sistema elétrico real. Com a utilização do software desenvolvido, espera-se fornecer subsídio
e segurança para a realização de operações em subestações, bem como auxiliar a prevenção
de falhas, perda de equipamentos e desligamentos. O presente trabalho é parte integrante de
um projeto de Pesquisa e Desenvolvimento (P&D), desenvolvido pelo Laboratório de Análise
e Proteção de Sistemas Elétricos do Centro de Estudos em Energia e Sistemas de Potência
(LAPES-CEESP) da UFSM, em parceria com a Companhia Estadual de Geração e Transmissão
de Energia Elétrica (CEEE-GT) do Rio Grande do Sul.
|
4 |
Fault Location and Classification for Transmission Line Based on Wavelet TransformWang, Qiuhong January 2016 (has links)
With the rapid development of power systems, locating and classifying faults is critical to the continuity and reliability of the transmission system. In this thesis, a traveling-wave based technique for fault location and classification on high voltage and extremely high-voltage transmission lines is proposed. The traveling-wave based protection has the advantage of fast response and not being affected by power swing and CTs saturation. In this thesis, the transient characteristics of single line to ground fault (which can be divided into solid fault and arcing fault) and lightning disturbance are extracted by using Clarke transformation and wavelet transformation. The differences among recorded traveling wave arrival times are used to calculate the fault location, and the wavelet energy at different frequency bands is utilized to distinguish between lightning and different kinds of fault. A criterion is proposed according to the energy ratio. The proposed scheme can identify different faults correctly and quickly. In addition, the influence of busbar capacitance, current transformer and coupling capacitor voltage transformer are considered. The simulation of a transmission system has been made in ATP/EMTP, and the calculations have been made in MATLAB. / Med den snabba utvecklingen av kraftsystem är lokalisering och klassificering av fel avgörande för kontinuiteten och tillförlitligheten hos överföringssystem. I denna avhandling föreslås en vågrörelse-baserad teknik för fellokalisering och klassificering av kraftledningar för högspänning och extremt hög spänning. Vågrörelsebaserat skydd har fördelen av snabb respons och att det inte påverkas av kraft fluktuationer och strömtransformsmättnad. I denna avhandling tas momentana egenskaperna av jord till ledningsfel (vilket kan delas in i stumt jordfel och ljusbågefel) och blixtstörning fram med hjälp av Clarke transformation och wavelet transformation. Skillnaderna mellan de uppmätta vågrörelsernas ankomsttider används för att beräkna fellokalisering och wavelet energin vid olika frekvensband, vilket används för att skilja mellan blixt och olika sorters fel. Ett kriterium föreslås enligt energiförhållandet. Det föreslagna systemet kan identifiera olika sorters fel korrekt och snabbt. Dessutom övervägs påverkan av strömskenans kapacitans, strömtransformator och kopplingskondensatorspänningsomvandlare. Simuleringen av transmissionssystem har gjorts med ATP/EMTP, och beräkningarna är gjorda med MATLAB.
|
5 |
Μελέτη υπερτάσεων λόγω κεραυνών σε γραμμές μεταφοράς υψηλής τάσης του δικτύου της ΚύπρουΚουνναπής, Στυλιανός 07 July 2015 (has links)
Σκοπός της παρούσας διπλωματικής είναι η μελέτη των αναπτυσσόμενων υπερτάσεων στις γραμμές μεταφοράς υψηλής τάσης (132kV) του δικτύου της Αρχής Ηλεκτρισμού Κύπρου. Γίνεται μια παρουσίαση του κάθε στοιχείου του δικτύου ξεχωριστά, με ποιο τρόπο μπορεί να μοντελοποιηθεί και πως συμπεριφέρεται σε κεραυνικό πλήγμα εύρους 100kA με τρία διαφορετικά σήματα. Τέλος παρουσιάζονται τα αποτελέσματα της προσομοίωσης στο λογισμικό ATP-EMTP και εξάγονται παρατηρήσεις και συμπεράσματα.
Αρχικά στο πρώτο κεφάλαιο γίνεται μια εισαγωγική παρουσίαση της διπλωματικής εργασίας, μια ιστορική αναδρομή για τα συστήματα ηλεκτρικής ενέργειας και την επανάσταση που έφερε η ανάπτυξη τους. Στη συνέχεια παρουσιάζεται η πορεία του ηλεκτρισμού στη Κύπρο κάτω από το φορέα διαχείρισης του, την Αρχή Ηλεκτρισμού Κύπρου.
Στο δεύτερο κεφάλαιο παρατίθενται λεπτομερώς τα στοιχεία που συνθέτουν σήμερα το δίκτυο της Α.Η.Κ από την παραγωγή, τη μεταφορά και τη διανομή της ηλεκτρικής ενέργειας στο νησί. Ακόμη γίνεται μία σύντομη αναφορά στο κλίμα της Κύπρου και πως αυτό ευνοεί τη δημιουργία κεραυνών.
Στο τρίτο κεφάλαιο παρουσιάζεται και περιγράφεται αναλυτικά η αιτία της δημιουργίας των εξωτερικών υπερτάσεων, δηλαδή ο κεραυνός και πως λειτουργεί αυτός ως φυσικό φαινόμενο. Επίσης περιγράφονται οι διάφοροι μηχανισμοί δημιουργίας υπερτάσεων από τους κεραυνούς.
Στα επόμενα τρία κεφάλαια παρουσιάζονται ενδελεχώς τα τρία βασικά στοιχεία του δικτύου το οποίο τυγχάνει προσομοίωσης, δηλαδή οι γραμμές μεταφοράς, οι πυλώνες και οι αλυσοειδείς μονωτήρες ανάρτησης. Συγκεκριμένα, για τις μεταφοράς γίνεται αναφορά στα γενικά τους στοιχεία, στα χαρακτηριστικά τους αλλά και στις καταπονήσεις που υφίστανται. Στους πυλώνες παρουσιάζεται η καταπόνηση τους από κεραυνούς με απότομο μέτωπο, το πως εκτιμάται η αντίσταση γείωσης τους και τι ρόλο παίζει η ειδική αντίσταση εδάφους. Όσο αφορά τους μονωτήρες ανάρτησης προβάλλονται γενικά κατασκευαστικά τους στοιχεία, οι συνθήκες στις οποίες λαμβάνει χώρα η υπερπήδηση(διάσπαση) τους και οι μέθοδοι υπολογισμού του χρόνου επιφανειακής διάσπασης των.
Στο έβδομο κεφάλαιο παρουσιάζεται το λογισμικό ATP- EMTP μέσω του οποίου γίνεται η μοντελοποίηση των στοιχείων του δικτύου και η προσομοίωση τους. Γίνεται αναφορά στη δομή του προγράμματος, τα ιστορικά του στοιχεία, τις διάφορες βιβλιοθήκες μοντέλων που εμπεριέχονται σε αυτό, τα διάφορα προγράμματα υποστήριξης του και περισσότερο το ATP – Draw όπου παρέχεται η δυνατότητα για σχεδίαση των στοιχείων και εισαγωγή των παραμέτρων τους.
Στο όγδοο κεφάλαιο παρουσιάζεται η μοντελοποίηση των προαναφερθέντων στοιχείων της διάταξης και ενσωμάτωση τους στο ATP – EMTP.
Τέλος, στο ένατο και τελευταίο κεφάλαιο παρατίθενται τα αποτελέσματα της προσομοίωσης, η εξαγωγή των αποτελεσμάτων, οι παρατηρήσεις και τα συμπεράσματα. / The aim of the work described in this thesis is the study of the induced overvoltages on high voltage transmission lines (132kV) of the network of the Electricity Authority of Cyprus. Every network element is separately described, ways for the modeling of each element are explored and the behavior of each element during a 100kA lightning strike using three different signals is observed. Lastly, the results of the simulation are presented by using ATP/EMTP software, observations are made and findings are determined.
The first chapter introduces the thesis and consists of a historical overview of electrical power systems and an overview of the revolution brought through their development. Thereafter the development of electricity in Cyprus as part of the electricity supplier “Electricity Authority of Cyprus” is analyzed. A detailed review of the system used by the “Electricity Authority of Cyprus” (Generation, Transmission, Distribution, Supply) constitutes the second chapter. Further, a brief reference to the climate of Cyprus is made and on how it favors the formation of lightning.
The third chapter presents and describes in detail what might cause extraneous voltages, i.e. lightning and how it works as a natural phenomenon. Plus the different generation mechanisms of lightning overvoltages are described.
In the next three chapters the main three elements of the network being simulated are presented in detail, i.e. transmission lines, pylons and catenary suspension insulators. Namely, with regard to transmission lines general information is given, their characteristics are described along with the stresses they face. As long as the pylons are concerned, the stresses they face by steep-front lightning are described, information on how to assess their grounding system resistance is given and it is also discussed whether Soil Resistivity plays a dominant role. Regarding suspension insulators their parts are described, the circumstances under which their disruptive discharge takes place and the methods of calculating surface discharges.
In the seventh chapter the ATP/EMTP software used for network modeling and simulation is presented. Reference is made to the program structure, the historical data, the various model- libraries included in it, the various supporting programs and more specifically ATPDraw which creates/draws the elements and which does the parameter fitting.
The eighth chapter contains the analysis of the modeling of the aforementioned parts of the assembly and their integration in the ATP/EMTP.
Lastly, in the ninth and final chapter the results of the simulation are presented, observations are made and findings are determined.
|
6 |
Διαβάθμιση μόνωσης των γραμμών υψηλής τάσης του ελληνικού συστήματοςΜπουλούμπασης, Ιωάννης 20 October 2010 (has links)
Στην παρούσα διπλωματική εργασία μελετάται η ικανότητα μόνωσης των γραμμών μεταφοράς του ελληνικού δικτύου μεταφοράς και διανομής ηλεκτρικής ενέργειας, καθώς και η αντικεραυνική συμπεριφορά τους. Αρχικά, γίνεται μια μικρή ιστορική αναδρομή και παρουσιάζονται κάποια στοιχεία τα οποία αφορούν το ελληνικό σύστημα μεταφοράς. Στη συνέχεια γίνεται μια πιο αναλυτική περιγραφή των γραμμών μεταφοράς, παρουσιάζοντας τις κατηγοριοποιήσεις στις οποίες και υπόκεινται, με κύρια κριτήρια αυτών να είναι η ονομαστική τάση υπό την οποία είναι φορτισμένες, το μήκος, αλλά και την ικανότητά τους στην μεταφορά ηλεκτρικής ενέργειας. Επίσης, γίνεται αναφορά στις καταπονήσεις τις οποίες δέχονται οι γραμμές αλλά και στην μόνωση, όπως και στα χαρακτηριστικά τους. Έπειτα, εξετάζονται οι κεραυνοί και παρατίθεται μια ενδελεχής παρουσίαση των ειδών των κεραυνικών αλλά και των ατμοσφαιρικών εκκενώσεων, προχωρώντας μετά στην αναφορά των κύριων χαρακτηριστικών των κεραυνών, των αποτελεσμάτων τα οποία προκαλούν, αλλά και των παραμέτρων από τις οποίες εξαρτούνται και χαρακτηρίζονται. Πιο κάτω, μπορούμε να δούμε ποια είναι τα κύρια είδη σφαλμάτων στις εναέριες γραμμές μεταφοράς και από ποιά αίτια αυτά προκαλούνται. Το επόμενο κεφάλαιο πραγματεύεται τη μόνωση των γραμμών αλλά και τα πλήγματα από τους κεραυνούς. Πιο αναλυτικά, εξετάζονται οι μηχανισμοί που προκαλούν την παραγωγή υπερτάσεων στις γραμμές, ενώ γίνεται ιδιαίτερη μνεία στο φαινόμενο της ανάστροφης διάσπασης της μόνωσης των γραμμών, καθώς και στα σφάλματα θωράκισης. Έπειτα, για το καθορισμό της θέσης του αγωγού προστασίας της γραμμής παρουσιάζονται οι μέθοδοι της μέγιστης γωνίας και η ηλεκτρογεωμετρική μέθοδος, ενώ για την πρόβλεψη του πιθανού αριθμού σφαλμάτων στην γραμμή από ανάστροφα βραχυκυκλώματα παρατίθενται δύο μέθοδοι: η απλή και η βελτιωμένη μέθοδος ANACOM. Τέλος στο τελευταίο κεφάλαιο, υπάρχει μια εκτενής αναφορά στο πρόγραμμα ΑΤΡ-ΕΜΤΡ και τα στοιχεία του καθώς και τα συνεργαζόμενα με αυτό προγράμματα. Αυτό γίνεται γιατί παρουσιάζεται μια προσομοίωση μιας πραγματικής γραμμής του δικτύου της Δ.Ε.Η, της R-37, η οποία βρίσκεται στην περιοχή Λάππα Αχαΐας, με τη χρήση του συγκεκριμένου προγράμματος και κύρια του γραφικού προεπεξεργαστή του, που είναι το πρόγραμμα ATPDraw. Η προσομοίωση αυτή γίνεται για διαφορετικών εντάσεων κεραυνικά ρεύματα τα οποία πλήττουν τον αγωγό προστασίας ή τον αγωγό φάσης της γραμμής σε διάφορα σημεία αυτής, και μελετά τις παραγόμενες εξαιτίας αυτών των κεραυνών υπερτάσεις και το βαθμό επικινδυνότητάς τους για τον παρακείμενο σταθμό διανομής της ιδίας περιοχής. / In this diploma thesis the insulation capability of the transmission lines of the Greek transmission and distribution system of electric energy is studied, as well as their lightning behavior. Initially, there is a little historical background and it is also presented some details concerning the Greek transmission system. Afterwards a more detailed description of the transmission lines, showing the classifications in which they are subject to, with main criteria, the nominal voltage in which they are charged, the length, but also their ability of electricity transmission. Moreover, there is a reference to the stresses in which the lines are subjected to, as well as their insulation level and their characteristics. Next, there is a study about lightnings and it is provided a thorough presentation of the types of lightning and atmospheric discharges, moving afterwards to the reference of the main lightning features, the results that they rise, as well as the parameters that they depend on and described from. Below, we can see what the main types of outages in air transmission lines are and which are the causes that generate them. The next chapter deals with the isolation of lines the, as well as with lightning strokes. More specifically, the mechanisms which cause the overvoltages on transmission lines are described, making a special reference to the backflashover phenomenon on the insulation of the lines, and the proofing outage. Then, in order to determine the position of the line protection conductor, the maximum angle method as well as the electrogeometrical method are presented, while, in order to anticipate the likely number of outages due to backflashover the following two methods are represented : the simple and improved ANACOM method. Finally, the last chapter contains an extented reference to the ATP-EMTP program and its components, as well as its affiliate programs. This is because a simulation of a real line network of the electricity company is represented, the R-37 distribution line, which is located in the region of Lappa Achaia, with the use of this program and mainly its graphic preprocessor, which is the program ATPDraw. This simulation has been done for different intensities of lightning currents, which strike at the protection conductor or the phase conductor of the line at various points on the line and it is also studying overvoltages which are produced due to these lightning currents and the risk rate for the nearby service station, which is located in the same area.
|
7 |
Otimização metaheurística de linhas de transmissão pela avaliação do vetor de poynting utilizando o método dos elementos de contornoOliveira, Lucas Vitor Fonseca de 30 March 2012 (has links)
Submitted by Renata Lopes (renatasil82@gmail.com) on 2016-05-31T15:07:36Z
No. of bitstreams: 1
lucasvitorfonsecadeoliveira.pdf: 1420167 bytes, checksum: b5075b7ccc33c587012a46901a9b21af (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2016-07-02T12:44:37Z (GMT) No. of bitstreams: 1
lucasvitorfonsecadeoliveira.pdf: 1420167 bytes, checksum: b5075b7ccc33c587012a46901a9b21af (MD5) / Made available in DSpace on 2016-07-02T12:44:37Z (GMT). No. of bitstreams: 1
lucasvitorfonsecadeoliveira.pdf: 1420167 bytes, checksum: b5075b7ccc33c587012a46901a9b21af (MD5)
Previous issue date: 2012-03-30 / CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Com a abertura legal do setor elétrico brasileiro na década de 90 para investimentos privados, em especial com a implantação sistemática de leilões para definição dos concessionários de transmissão, diversos estudos foram efetuados com o objetivo de viabilizar projetos de linha de transmissão de modo a concorrem nesses leilões. Grandes transmissoras, como Furnas, Chesf e Eletronorte promoveram pesquisas em consórcio com empresas construtoras de linhas e fabricante de ferragens e isoladores, com o objetivo de desenvolverem projetos com baixa relação Reais/MW transmitido. Neste cenário, muitos projetos de linhas de potência natural elevada foram idealizados e implantados, e como fruto desses projetos, publicações foram realizadas descrevendo os resultados obtidos. Todavia, apesar da quantidade, qualidade e riqueza das informações publicadas, a descrição do processo de otimização dos parâmetros elétricos da linha, em especial da impedância característica, não receberam destaque, sendo muita das vezes suprimida nos artigos. Neste sentido, este trabalho propõe a investigação de um método inovador de otimização da capacidade de transmissão de linhas de potência natural elevada, através da análise indireta dos efeitos da variação do posicionamento dos cabos condutores no feixe sobre a impedância característica da linha, por meio de uma abordagem original que utiliza basicamente o vetor de Poynting como função objetivo do Método de Otimização por Enxame de Partículas, sendo os campos elétricos e magnéticos necessários para definição do vetor de Poynting calculados por meio do Método dos Elementos de Contorno. O método foi validado utilizando como exemplos a otimização das configurações de feixes da linha de 500 kV Interligação Norte/SUL III – Trecho 2 e Linha de 500 kV Presidente Dutra / Teresina / Sobral / Fortaleza. Foram encontrados ganhos na capacidade de transmissão de 7% e 22% respectivamente devido à redução da impedância característica calculada após a otimização através da rotina Line Constants do programa ATP/EMTP, e comparando-a com os valores originais. / With the legal opening for private investments in the Brazilian energy sector in the 90's, in particular the systematic implementation of auctions for defining power transmission concessions, several studies were made with the aim of developing transmission line projects in order to compete in these auctions. Major transmission companies such as Furnas, Eletronorte and CHESF promoted consortium research with line builders and hardware and insulators manufacturers, in order to develop projects with low cost/MW transmitted. In this scenario, many projects of high surge-impedance loading lines were developed and implemented, and as a result of these projects, publications were made describing the results. However, despite the quantity, quality and resourcefulness of published information, the descriptions of the optimization process of electrical line parameters, especially regarding characteristic impedance, were not given prominence, being often suppressed from the articles. Thus, this study proposes the investigation of a method for optimizing the transmission capacity of high surge-impedance loading lines, varying the power cables in the bundle, indirectly reducing its characteristic impedance through an original approach that uses basically the Poynting's vector as objective function of the Particle Swarm Optimization method.The electric and magnetic fields needed for defining the Poynting vector were calculated using the Boundary Element Method. The method was validated through the optimization of bundle configuration, using as a model the characteristics of the 500 kV line North / South Interconnection III - Segment 2 and the 500 kV line Presidente Dutra / Teresina / Sobral / Fortaleza. It was found transmission capacity gains of 7% and 22% respectively, by reducing the characteristic impedance, which was calculated after the optimization using the EMTP/ATP Line Constants Program, comparing it with the original values.
|
8 |
Συμπεριφορά απαγωγέων υπέρτασης σε γραμμές μεταφοράς σε πλήγματα κεραυνώνΠανούση, Αικατερίνη 15 April 2013 (has links)
Σκοπός της εργασίας είναι η μελέτη της συμπεριφοράς απαγωγέων υπέρτασης στις γραμμές μεταφοράς υψηλής τάσης όταν αυτές καταπονούνται από κεραυνικά πλήγματα. Γίνεται μοντελοποίηση πραγματικών πυλώνων και γραμμών του Ελληνικού συστήματος μεταφοράς, καθώς και αλεξικέραυνων, προσομοίωσή τους στο πρόγραμμα ATP/EMTP και στη συνέχεια μελέτη των υπερτάσεων που εμφανίζονται κατά τη διάρκεια κεραυνικών πληγμάτων πάνω στους αγωγούς προστασίας. / The purpose of this thesis is the study of the behavior of surge arresters on high voltage transmission lines when they are strained by lightning strikes. Steel towers and transmission lines used in the Greek Transmission System and also surge arresters are simulated with ATP/EMTP and the overvoltages that occur during lightning strikes on the shielding wires are studied.
|
9 |
Modélisation de la propagation des signaux HF dans un réseau d'énergie électriqueTran, Anh 20 September 2006 (has links) (PDF)
Ce travail de thèse porte sur l'étude de la propagation des courants porteurs en ligne dans le réseau de distribution d'énergie électrique. Pour simuler les phénomènes, des modèles HF des éléments ont été élaborés, principalement pour le transformateur MT/BT. Une grande partie est constituée par l'identification en HF du transformateur de puissance MT/BT, élément majeur et complexe du réseau de distribution. Après une étude bibliographique des modèles du transformateur en HF, nous avons réalisé de nombreuses mesures externes sur deux transformateurs réels 20/0,4 kV de moyenne puissance afin d'obtenir leurs impédances de transfert dans la gamme 100Hz – 10MHz. Des schémas équivalents ont été proposés, un en MF et un autre en HF. Les mesures et les méthodes nécessaires pour déterminer les caractéristiques de transfert de signaux MF-HF à travers le transformateur ont été synthétisées et présentées. Afin de valider ces modèles, les caractéristiques de transfert de signaux à travers le transformateur sont mesurées et puis comparées avec des simulations. Ensuite, les modèles HF des autres éléments principaux rencontrés dans le réseau de distribution sont analysés. Finalement, nous avons mis en oeuvre l'ensemble des modèles pour simuler avec ATP/EMTP la propagation des signaux HF dans un réseau de distribution réel. Plusieurs schémas sont exploités afin de rechercher les paramètres topologiques qui influent sur la qualité de transmission des CPL.
|
10 |
Μοντελοποίηση μονωτήρων υψηλής τάσηςΝταλούκας, Απόστολος 30 December 2014 (has links)
Σκοπόςτης παρούσας εργασίαςείναι αρχικά η δημιουργία ενός μοντέλου με τα χαρακτηριστικά ενός μονωτήρα υψηλής τάσης.Το μοντέλο αυτό θα ενσωματωθεί στο μοντέλο μιας γραμμής υψηλής τάσης διπλού κυκλώματος των 400kV, για να υπολογιστούν οι επαγόμενες υπερτάσεις σε παρακείμενο υπέργειο αγωγό μεταφοράς υδρογονανθράκων.
Τα παραπάνω επιτυγχάνονταιμε τη μοντελοποίηση πραγματικών πυλώνων και γραμμών του Ελληνικού συστήματος μεταφοράς καθώς και υπέργειου αγωγού υδρογονανθράκων.Η εξομοίωση υλοποιείται μέσω του προγράμματος ATP-EMTP.
Για τον σχεδιασμό του μοντέλου του μονωτήρα χρησιμοποιήθηκε το μοντέλοVolt-TimeCurve. Επίσης χρησιμοποιήθηκαν δύο τύποι κεραυνού για τις προσομοιώσεις, για γρήγορο και αργό σήμα, με τιμές ρεύματος 100kA. Για το γρήγορο, οι τιμές χρόνων μετώπου και ουράς 1.2/50μs και για το αργό σήμα 10/350μs.
Σε αυτή τη διπλωματική εργασία υπάρχουν 8 κεφάλαια. Στα πρώτα 5 κεφάλαια έγινε μια παράθεση πληροφοριών και θεωρητική προσέγγιση όλων των επιμέρους τμημάτων που συνθέτουν τη συνολική διάταξη της μελέτης. Στο 5ο κεφάλαιο γίνεται λεπτομερής αναφοράστο πρόγραμμα ATP-EMTP στο οποίο πραγματοποιήθηκε η προσομοίωση.Στο 6o κεφάλαιο γίνεται η μοντελοποίηση όλων των στοιχείων της διάταξης και η ενσωμάτωσή τους στοATP-EMTP. Στο 7ο κεφάλαιο γίνεται παρουσίαση του μοντέλου του μονωτήρα που αναπτύχθηκε και στο 8ο κεφάλαιο γίνεται παρουσίαση των αποτελεσμάτων της προσομοίωσης και εξάγονται κάποια συμπεράσματα σχετικά με τη διάταξη. / The purpose of this paper is , at first, to create a model with the features of a high voltage insulator. This model will be incorporated into the model of a high-voltage line double circuit 400kV, to calculate the induced transients in adjacent aboveground pipeline hydrocarbons.
These goals are achieved by modeling real pillars and lines of Greek transport system and overground pipeline hydrocarbons. The simulation is implemented through the ATP-EMTP.
The model Volt-Time Curve is used for the modeling of the insulator. Also, two types of lightning are used for the simulations, for fast and slow signal, with current values 100kA. For fast signal, the prices of front and tail time are 1.2 / 50ms and for slow signal 10 / 350ms.
In this thesis there are 8 chapters. In the first five chapters was a quote and information theoretical approach to all individual parts that make up the overall layout of the study. The 5 chapter is a detailed reference to the ATP-EMTP program which performed the simulation. The 6 chapter is the modeling of all elements of the layout and the incorporation into the ATP-EMTP. In chapter 7 we present the model of the insulator developed and in chapter 8 we present the simulation results and draw inferences about the layout.
|
Page generated in 0.2088 seconds