Este trabalho apresenta resultados de ensaios de fluência não confinada executados pelo modo convencional e acelerado. Foi possível avaliar alguns parâmetros que influenciam o fenômeno da fluência em geotêxteis não tecidos, e ainda comparar o comportamento de dois geotêxteis ensaiados, um de polipropileno e outro de poliéster. Construíram-se as curvas isócronas dos materiais estudados e as análises das mesmas mostram que os geotêxteis de poliéster sofrem menores reduções de rigidez quando submetidos a carregamentos constantes do que os geotêxteis de polipropileno, os resultados dos ensaios acelerados apresentam-se estaticamente compatíveis com os resultados convencionais, denotando a viabilidade do Stepped Isothermal Method (SIM) como ensaio de caracterização fluência não confinada para geotêxteis não tecidos. / This work presents results of conventional and accelerated unconfined creep tests. Some factors that influence the creep behavior of nonwoven geotextiles are evaluated. The performance of polypropylene and polyester geotextiles is also compared. Isochronous curves show that the polyester geotextiles have a smaller rigidity reduction when compared with the polypropylene geotextiles when submitted to constant loads. The results of the accelerated tests are statistically compatible with the results of conventional tests, indicating that the Stepped Isothermal Method is a feasible approach for characterizing the creep behavior of nonwoven geotextiles.

Este trabalho apresenta resultados de ensaios de fluência não confinada executados pelo modo convencional e acelerado. Foi possível avaliar alguns parâmetros que influenciam o fenômeno da fluência em geotêxteis não tecidos, e ainda comparar o comportamento de dois geotêxteis ensaiados, um de polipropileno e outro de poliéster. Construíram-se as curvas isócronas dos materiais estudados e as análises das mesmas mostram que os geotêxteis de poliéster sofrem menores reduções de rigidez quando submetidos a carregamentos constantes do que os geotêxteis de polipropileno, os resultados dos ensaios acelerados apresentam-se estaticamente compatíveis com os resultados convencionais, denotando a viabilidade do Stepped Isothermal Method (SIM) como ensaio de caracterização fluência não confinada para geotêxteis não tecidos. / This work presents results of conventional and accelerated unconfined creep tests. Some factors that influence the creep behavior of nonwoven geotextiles are evaluated. The performance of polypropylene and polyester geotextiles is also compared. Isochronous curves show that the polyester geotextiles have a smaller rigidity reduction when compared with the polypropylene geotextiles when submitted to constant loads. The results of the accelerated tests are statistically compatible with the results of conventional tests, indicating that the Stepped Isothermal Method is a feasible approach for characterizing the creep behavior of nonwoven geotextiles.

O método convencional de ensaios para a obtenção das curvas de fluência de geossintéticos pode necessitar de períodos de até 10.000 horas. Entretanto, a utilização de ensaios acelerados têm se mostrado bastante eficiente, especialmente para avaliar rapidamente a qualidade do material. Estudos bem sucedidos realizados por diversos autores, utilizaram o método Stepped Isothermal Method (SIM) para acelerar a fluência nos geotêxteis. Neste trabalho, com base neste método foi estimada a fluência de dois geotêxteis com 300 g/m² do tipo não tecido de poliéster (PET) de fibra curta e contínua. Neste estudo, foi analisada a fluência causada por carregamentos de 5, 10, 20, 40 e 60% da carga que causa a ruptura do material. Com base nos resultados conclui-se que os valores de deformação por fluência obtidos são satisfatórios, pois as previsões de alcance de até 355 anos estão próximos aos valores encontrados na literatura internacional. Ainda, para o tempo de 100 anos ficou evidenciado que para o geotêxtil não tecido do tipo PET, de fibra curta ou contínua, o comportamento mecânico do geotêxtil é mais influenciado pela deformação inicial do que pela fluência. / The conventional method of tests to achieve the geosynthetic creep curves may require times of up to 10,000 hours. However, the use of accelerated tests have shown to be very effective, especially for rapidly assessing the quality of the material. Successful studies by various authors used the Stepped Isothermal Method Method (SIM) to accelerate creep in geotextiles. In this work, based on this method was estimated creep of two non-woven geotextiles of polyester with 300 g/m², short or continuous fiber. In this study, creep caused by loads of 5, 10, 20, 40 and 60% of the rupture load of the material was analyzed. Based on the results, it is concluded that the creep strain values obtained are satisfactory, because up to 355 years range forecasts are close to those found in the literature. Still, for the 100-year time, it became evident that for the nonwoven geotextile type PET with short or continuous fiber, the mechanical behavior of the geotextile is more influenced by the initial deformation than by creep.

Une augmentation de la température à jeune âge du béton peut être causée par la chaleur d’hydratation dans le cas d’éléments massifs ou par l’application d’un traitement thermique dans l’industrie de la préfabrication. Lorsque le couple critique température maximale/durée de maintien est dépassé, il y a formation différée de l’ettringite (DEF) expansive pouvant fissurer les pièces. Les travaux présentés dans ce mémoire ont pour but principal d’établir une limite sécuritaire pour des mélanges V-S pour béton de masse et V-P pour béton préfabriqué régulièrement utilisés par le Ministère des Transports du Québec. Ces bétons utilisent des liants binaires composés de fumée de silice de type GUb-SF et des liants ternaires composés de fumée de silice et de cendres volantes ou de laitier de haut-fourneau. La norme canadienne actuelle (CSA A23.1-14 et CSA A23.4-16) impose une limite fixe de température qui ne dépend ni de la durée de traitement ni du type de liant utilisé. Le lien, souvent énoncé dans la littérature, entre la réponse d’un liant à un traitement thermique et sa composition chimique et minéralogique, déterminé respectivement par fluorescence X et diffraction des rayons X couplée par la méthode de calcul Rietveld, a pu être confirmé. Le rapport SO3 solubles/Al2O3 est notamment ce qui permet la meilleure estimation de la sensibilité d’un liant. Le processus de formation différée de l’ettringite est lent et peut prendre plusieurs années. Donc, pour étudier le phénomène, des méthodes d’essais accélérés ont été testées. Des méthodes ont ainsi pu être proposées pour de futurs tests. Une méthode d’essai rapide d’expansion de barres de mortier permet d’identifier les liants les plus sensibles à la DEF. La formation de la DEF dans les liants les moins sensibles peut être appréciée par le gain de masse de prismes de béton et leur observation microstructurale au microscope électronique à balayage (MEB). Une méthode sur bétons de masse et bétons préfabriqués permet de classer le degré de sensibilité d’un liant face à la DEF selon le gain de masse des prismes de béton. Les liants ternaires montrent une bonne résistance face à la DEF. La sensibilité des liants binaires dépend du rapport SO3 solubles/Al2O3 du liant. / Abstract : A heat cure for concrete can be caused by hydration in massive structures or by thermal treatment in prefabrication industry. When the limit couple maximum temperature/duration of treatment is exceeded, the delayed formation of ettringite occurs and leads to cracking in concrete. The main goal of the work presented in this essay is to establish a safe batch limit for some mixtures, VS (mass concrete) and V-P (precast concrete) which are often used by MTQ. These concretes use some cements blended with silica fume and ternary blended cements with silica fume and fly ash or blast furnace slag. Indeed, the current Canadian standard (CSA A23.1) set a limit which doesn’t depend on duration of the treatment nor the type of bender. However, the link between composition of the used bender, with can be determined by X-ray fluorescence and X-ray diffraction, and the response to a thermal treatment has been confirmed. The soluble SO3/Al2O3 ratio allows to estimate if a bender is sensitive to heat cure. The delayed formation of ettringite is a long process which can last a decade. In order to study this phenomenon, several accelerated test methods have been used. Some of them are available for some future tests. An accelerated expansion method using mortar bar allows to spot the DEF-sensitive benders. Delayed ettringite formation in the less sensitive bender can be estimated by weight gain in concrete prisms and by observation with scanning electron microscope (SEM). The sensitivity level of a bender can by estimated using a method based on weight gain. Ternary blended cements show a greater ability to withstand DEF. The sensibility of binary blended cements depends on soluble SO3/Al2O3 ratio.

La nécessité de rénover les réseaux d'assainissement des grandes villes et les besoins de construire de nouvelles structures conduisent les gestionnaires de réseaux d'assainissement et les fabricants de canalisation à rechercher des solutions pour obtenir des installations d'assainissement durables. Parmi les détériorations rencontrées dans ces structures, 9% peuvent être attribués à la biodétérioration des matériaux cimentaires. Cette étude a deux objectifs principaux. Le premier est de développer un essai accéléré reproductible en laboratoire et qui donne des résultats proches de ceux obtenus sur site. Le second est d'étudier la biodétérioration des matériaux cimentaires pour mieux comprendre les mécanismes et plus spécifiquement la différence de comportement entre les matériaux à base de ciment d'aluminate de calcium (CAC) et de ciment Portland ordinaire (OPC). Dans ce cadre, différentes formulations cimentaires ont été exposées in situ afin de déterminer les paramètres influant sur la biodétérioration. En parallèle, des expériences en laboratoire ont été réalisées pour mieux comprendre chaque étape du mécanisme de biodétérioration. Les résultats des expositions sur site montrent que les matériaux à base de CAC ont une durabilité plus importante que les autres formulations cimentaires. Les études réalisées en laboratoire permettent d'attribuer ces meilleures performances à la teneur en aluminium qui inhibe la croissance des microorganismes tout en protégeant la matrice grâce à la précipitation d'une couche d'alumine hydratée dans la porosité et à la surface de ces matériaux et qui maintient le pH à 3,5-4. La chimie de surface a également un rôle important en favorisant ou non l'oxydation abiotique de l'H2S. Les résultats des expositions sur site et des différents essais de laboratoire ont été utilisés pour développer un essai accéléré donnant des résultats prometteurs / The need for renovation of sewer networks in major cities and the necessity to build new structures lead managers of sewer pipe and manufacturers to seek for solutions for sustainable sanitation. 9% of damages encountered in these structures can be attributed to the biodeterioration of cementitious materials. This study has two main objectives. The first one is to develop an accelerated reproducible laboratory test that gives results similar to those obtained on site. The second is to study the biodeterioration of cementitious materials in order to better understand mechanisms and more especially the difference in behavior between materials based on calcium aluminate cement (CAC) and ordinary Portland cement (OPC). Within this framework, different cement formulations were exposed in situ to identify the parameters influencing biodeterioration. Meanwhile, laboratory experiments were conducted to better understand each step of the mechanism of biodeterioration. Results of on site exposition show that materials based on CAC have a greater durability than other cement formulations. Laboratory studies assign these best performances to the aluminum content which inhibits the growth of microorganisms while protecting the matrix by precipitation of a hydrated alumina layer in the porosity and on the surface of these materials. This layer maintains the pH at 3.5-4. Surface chemistry was shown to play an important role in catalizing abiotic oxidation of H2S. The results of on-site exhibitions and various laboratory tests were used to develop an accelerated test giving promising results

Made available in DSpace on 2016-06-02T19:12:04Z (GMT). No. of bitstreams: 1 3292.pdf: 2469537 bytes, checksum: cab8a8d13a7ab1753c5b3bbfe24b647a (MD5) Previous issue date: 2010-08-11 / The growing advanced composites appliance in aircraft s structural parts has demanded to spread the knowledge about mechanical behavior prediction in longer time periods. In this way, the main purpose of this study is to establish an accelerated test method based on mechanical-dynamical-thermal analysis (DMTA), to predict the mechanical behavior of carbon fiber/epoxy resin composites. The DMTA technique was used on two modes: multi-frequency and creep. In the first case, three point bending tests on dynamical mode did not present a good fitting to built master curves, considering the experimental parameters used. Though, creep tests showed good results. In these tests, parameters used as temperature range from 25ºC to 235ºC and isothermals at every 15ºC for 100 minutes allowed to obtain compliance modulus versus time master curves with a good fitting. From the obtained results, it is possible to conclude that the proposed method presented good adhesion to the basic concept of material viscoelasticity, therefore can be used to predict mechanical behavior of composite materials. / A crescente demanda de uso de compósitos poliméricos avançados em peças de responsabilidade estrutural na indústria aeronáutica tem exigido ampliar o conhecimento sobre a predição do comportamento mecânico desses materiais em longos períodos de tempo. Nesse sentido, este trabalho tem como objetivo estabelecer uma metodologia de ensaios acelerados, utilizando a técnica de análise térmica dinâmico-mecânica (DMTA), para prever o comportamento mecânico de compósitos de fibras de carbono em matriz de resina epóxi. O uso da técnica de DMTA foi baseado em dois tipos de ensaios: multifrequências e fluência. No primeiro caso, ensaios de flexão três pontos, em modo dinâmico, não mostraram bom ajuste na construção de curvas mestre, dentro das condições usadas neste estudo. Já ensaios realizados no modo de fluência apresentaram resultados promissores. Neste tipo de ensaio, o uso dos parâmetros, como intervalo de temperaturas de 25ºC a 235ºC e isotermas a cada 15ºC, com 100 minutos de duração, possibilitaram a construção de curvas mestre do módulo de compliância em função do tempo com um bom ajuste. A partir dos resultados obtidos pode-se concluir que o método proposto apresenta adesão aos conceitos básicos de viscoelasticidade de materiais e, portanto, pode ser utilizado para previsão do comportamento de materiais compósitos em longos períodos de tempo. A crescente demanda de uso de compósitos poliméricos avançados em peças de responsabilidade estrutural na indústria aeronáutica tem exigido ampliar o conhecimento sobre a predição do comportamento mecânico desses materiais em longos períodos de tempo. Nesse sentido, este trabalho tem como objetivo estabelecer uma metodologia de ensaios acelerados, utilizando a técnica de análise térmica dinâmico-mecânica (DMTA), para prever o comportamento mecânico de compósitos de fibras de carbono em matriz de resina epóxi. O uso da técnica de DMTA foi baseado em dois tipos de ensaios: multifrequências e fluência. No primeiro caso, ensaios de flexão três pontos, em modo dinâmico, não mostraram bom ajuste na construção de curvas mestre, dentro das condições usadas neste estudo. Já ensaios realizados no modo de fluência apresentaram resultados promissores. Neste tipo de ensaio, o uso dos parâmetros, como intervalo de temperaturas de 25ºC a 235ºC e isotermas a cada 15ºC, com 100 minutos de duração, possibilitaram a construção de curvas mestre do módulo de compliância em função do tempo com um bom ajuste. A partir dos resultados obtidos pode-se concluir que o método proposto apresenta adesão aos conceitos básicos de viscoelasticidade de materiais e, portanto, pode ser utilizado para previsão do comportamento de materiais compósitos em longos períodos de tempo.

Les aspects biologiques ne sont généralement pas considérés lors de la conception des ouvrages de génie civil, malgré que la biocolonisation puisse affecter leur durabilité. Cette thèse s’intéresse à l’encrassement biologique des matériaux cimentaires en eau de rivière. Un essai de biocolonisation phototrophe accélérée, simulant les conditions en rivière a été mis au point et validé. Il a permis l’étude de pâtes cimentaires de différentes formulations. La colonisation a été évaluée par le taux de recouvrement de la surface, estimé par une méthode proposée d’analyse d’images. Une étude de l’influence de la rugosité sur la bioréceptivité du matériau a été réalisée à travers plusieurs paramètres de différentes natures et la densité de pics (paramètre d’espacement) a montré l’influence la plus déterminante. Un modèle a été proposé pour expliquer cette influence et a donné des résultats satisfaisants. Les influences de la porosité et du pH semblent être limitées dans les conditions de l’essai. Enfin, la micro-indentation a été adaptée pour l’évaluation mécanique de la détérioration des pâtes cimentaires sur de faibles épaisseurs. Cette technique pourra être utilisée pour évaluer la biodétérioration. / The biological aspects are generally not considered in the design of civil engineering works, although the biocolonisation may affect their durability. This thesis focuses on biofouling of cementitious materials in river water. A laboratory accelerated test of phototrophic biocolonisation, simulating the river conditions, was developed and validated. It allowed the study of cement pastes of different formulations. Colonization was assessed by the recovery rate of the surface, estimated by a proposed method of image analysis. A study of the roughness influence on the bioreceptivity of the material was conducted through several roughness parameters of different natures, and the peaks density (a spacing parameter) showed the most decisive influence. A model was proposed to explain this influence and gave satisfactory results. The influences of porosity and pH appeared to be limited in the test conditions. Finally, micro-indentation was adapted to the mechanical evaluation of the deterioration of thin layers of cement pastes. This technique may be used to evaluate the biodeterioration.

Concrete substructures are often subjected to environmental deterioration, such as sulfate and acid attack, which leads to severe damage and causes structure degradation or even failure. In order to improve the durability of concrete, the High Performance Concrete (HPC) has become widely used by partially replacing cement with pozzolanic materials. However, HPC degradation mechanisms in sulfate and acidic environments are not completely understood. It is therefore important to evaluate the performance of the HPC in such conditions and predict concrete service life by establishing degradation models. This study began with a review of available environmental data in the State of Florida. A total of seven bridges have been inspected. Concrete cores were taken from these bridge piles and were subjected for microstructural analysis using Scanning Electron Microscope (SEM). Ettringite is found to be the products of sulfate attack in sulfate and acidic condition. In order to quantitatively analyze concrete deterioration level, an image processing program is designed using Matlab to obtain quantitative data. Crack percentage (Acrack/Asurface) is used to evaluate concrete deterioration. Thereafter, correlation analysis was performed to find the correlation between five related variables and concrete deterioration. Environmental sulfate concentration and bridge age were found to be positively correlated, while environmental pH level was found to be negatively correlated. Besides environmental conditions, concrete property factor was also included in the equation. It was derived from laboratory testing data. Experimental tests were carried out implementing accelerated expansion test under controlled environment. Specimens of eight different mix designs were prepared. The effect of pozzolanic replacement rate was taken into consideration in the empirical equation. And the empirical equation was validated with existing bridges. Results show that the proposed equations compared well with field test results with a maximum deviation of ± 20%. Two examples showing how to use the proposed equations are provided to guide the practical implementation. In conclusion, the proposed approach of relating microcracks to deterioration is a better method than existing diffusion and sorption models since sulfate attack cause cracking in concrete. Imaging technique provided in this study can also be used to quantitatively analyze concrete samples.

No description available.