Spelling suggestions: "subject:"aadsorption capacity"" "subject:"aadsorption apacity""
1 |
A novel adsorbent for heavy metal remediation in aqueous environmentsZvinowanda, CM, Okonkwo, JO, Shabalala, PN, Agyei, NM 10 February 2009 (has links)
Abstract
The objective of this study was to investigate the possibility of using maize tassel as an alternative
adsorbent for the removal of chromium (VI) and cadmium (II) ions from aqueous solutions. The effect of pH, solution
temperature, contact time, initial metal ion concentration and adsorbent dose on the adsorption of chromium (VI) and
cadmium (II) by tassel was investigated using batch methods. Adsorption for both chromium (VI) and cadmium (II) was
found to be highly pH dependent compared to the other parameters investigated. Obtained results gave an adsorption
capacity of 79.1 % for chromium (VI) at pH 2, exposure time of 1h at 25 ºC. Maximum capacity of cadmium of 88 %
was obtained in the pH range of 5-6 at 25 ºC after exposure time of 1 h. The adsorption capacities of tassel for both
chromium (VI) and cadmium (II) were found to be comparable to those of other commercial adsorbents currently in use
for the removal of heavy metals from aqueous wastes. These results have demonstrated the immense potential of maize
tassel as an alternative adsorbent for toxic metal ions remediation in polluted water and wastewater.
|
2 |
A novel adsorbent for heavy metal remediation in aqueous environmentsZvinowanda, CM, Okonkwo, JO, Shabalala, PN, Agyei, NM 01 January 2009 (has links)
ABSTRACT:
The objective of this study was to investigate the possibility of using maize tassel as an alternative
adsorbent for the removal of chromium (VI) and cadmium (II) ions from aqueous solutions. The effect of pH, solution
temperature, contact time, initial metal ion concentration and adsorbent dose on the adsorption of chromium (VI) and
cadmium (II) by tassel was investigated using batch methods. Adsorption for both chromium (VI) and cadmium (II) was
found to be highly pH dependent compared to the other parameters investigated. Obtained results gave an adsorption
capacity of 79.1 % for chromium (VI) at pH 2, exposure time of 1h at 25 ºC. Maximum capacity of cadmium of 88 %
was obtained in the pH range of 5-6 at 25 ºC after exposure time of 1 h. The adsorption capacities of tassel for both
chromium (VI) and cadmium (II) were found to be comparable to those of other commercial adsorbents currently in use
for the removal of heavy metals from aqueous wastes. These results have demonstrated the immense potential of maize
tassel as an alternative adsorbent for toxic metal ions remediation in polluted water and wastewater.
|
3 |
Efficacy of Calcined Layered Double Hydroxide Clays in the Remediation of Phenol from WastewaterTabana, Lehlogonolo Shane January 2021 (has links)
The discharge of poorly treated wastewater containing persistent organic contaminants, such as phenol, into water bodies is a major contributor to water pollution. This is of great concern as it poses health threats to human beings, aquatic species and the ecosystem as a whole. Amongst the water treatment technologies available, adsorption is highly recommended because of its ease of operation, simple design and economic viability. Commercial activated carbon (CAC) has previously been utilised as an adsorbent for remediation of recalcitrant pollutants from wastewater. However, high costs and the complexity of regenerating spent carbon has resulted in the need for economically viable adsorbents.
The current research focused on the use of layered double hydroxide (LDH) clays for removal of phenol from contaminated water. The work is divided into two sections whereby the initial phase focuses on the use of commercial LDH clays, while the second phase is based on the in-house synthesised LDH clays guided by the performance of the commercial clays. Six commercial clays were sourced from different suppliers for the first phase, namely: DHT ̵ 4A and Alcamizer 1 from Kisuma Chemicals (Netherlands), Sorbacid 944, Sorbacid 911 and Hycite 713 from Clariant (Germany) and GF ̵ 450 from Greenfield additives (South Africa). Sorbacid 944 was the only clay which had three metallic constituents, magnesium Mg), zinc (Zn) and aluminium (Al) and was quantified to be 100% hydrotalcite; other clays had a substantial amount of impurities, such as calcite, boehmite and silica. Screening tests on the commercial clays were done by contacting 10 g L-1 of each clay with 40 mg L-1 synthetic phenol solution over 108 h. All the clays produced an adsorption efficiency of less than 10%. However, three clays which showed better adsorption efficiencies, namely: GF ̵ 450 (9%), Sorbacid (6%) and DHT ̵ 4A (3%) were utilised for further assessment. The three clays were thermally treated at 500°C for 4 h to produce mixed metal oxides (MMO), which are known to be good adsorbents. Calcination of the clays resulted in an increase in phenol adsorption efficiency over 24 h on Sorbacid 944 (87%) and DHT ̵ 4A (52%) while GF ̵ 450 remained below 10%.
Having produced a higher adsorption efficiency, Sorbacid 944 was further assessed for optimisation of phenol removal process. The initial pH of the solution was established to have an inverse proportionality relationship with phenol adsorption. Elevated pH resulted in an increase in the concentration of hydroxyl ions (OH-) which increased the reformation rate of calcined LDH (CLDH) and reduced the adsorption efficiency, while acidic pH was not evaluated as it is known to cause dissolution of LDH. Neutral pH was established to be the optimum pH for phenol adsorption. An increase in operational temperature resulted in a faster phenol adsorption rate from 2 x 10-4 g mg-1min-1 at 25 °C to 3.8 x 10-3 g mg-1min-1at 65 °C. The optimum clay loading was 10 g L-1 and the clay proved to be effective over three cycles. The Freundlich equilibrium isotherm best fitted the phenol adsorption equilibrium data, with a maximum adsorption capacity of 16.6 mg g-1. The change in enthalpy of the adsorption process was determined to be ca.20 kJ mol-1 indicating an endothermic process dominated by physical adsorption. The changes in Gibbs free energy over the evaluated temperatures ranged between -12 kJ mol-1 and -16 kJ mol-1. This showed that the adsorption process was spontaneous irrespective of the operating temperature.
The second phase of the study involved the synthesis of eight LDH clays containing varying compositions of Mg, Zn and Al with a carbonate interlayer anion. The clay which contained molar ratios of Mg (60%), Zn (20%) and Al (20%) (Mg0.6Zn0.2Al0.2) was found to possess higher adsorption efficiencies upon calcination at 450 °C for 4 h. Clays which had a Zn/Mg molar ratio greater than 1, Mg0.4Zn0.4Al0.2, Mg0.25Zn0.5Al0.25 and Zn0.75Al0.25 showed lower phenol adsorption efficiencies of 63%, 65% and 50% respectively. Clays with a Zn/Mg ratio less than 1, Mg0.6Zn0.2Al0.2 and Mg0.5Zn0.25Al0.25 showed optimal ratio of acidic and basic sites hence higher phenol adsorption efficiencies of 89% and 80% respectively. A higher aluminium content in the clay increased the spinel content (MgAl2O4) upon calcination resulting in a decrease in phenol adsorption. Phenol adsorption equilibrium data and kinetics for clay Mg0.6Zn0.2Al0.2 were comparable with those of Sorbacid 944.
Column reactor configurations should be investigated for industrial applications. Furthermore, real wastewater matrices containing multi-contaminants should be used instead of synthetic wastewater with a few pollutants. This will provide insight in the applicability of LDH for impurity removal from wastewater on an industrial scale. / Dissertation (MEng (Water Utilisation))--University of Pretoria, 2021. / Technology and Human Resources for Industrial Support (THRIP) / Chemical Engineering / MEng (Water Utilisation) / Unrestricted
|
4 |
Comparative Study of Adsorption of Dyes onto Activated Carbon and Modified Activated Carbon by Chitosan ImpregnationReddy Reddy, Pratyusha 24 September 2018 (has links)
No description available.
|
5 |
Effects of Anions on the Sodium Adsorption Capacity and Electrophoretic Mobility of Sodium Saturated Utah BentoniteSommerfeldt, Theron G. 01 May 1961 (has links)
Sodium saturated Utah bentonite was equilibrated in several concentrations of various sodium salt solutions. The effect of anions on the amount of sodium adsorbed was determined. The effect of anions on the electrophoretic mobility of the clay Has also studied. The results are reported herein.
|
6 |
Hydraulic, Diffusion, and Retention Characteristics of Inorganic Chemicals in BentoniteMuhammad, Naim 18 June 2004 (has links)
Inorganic contaminants, while transported through the bentonite layer, are chemically adsorbed onto the particle surfaces and exhibit a delay in solute breakthrough in hydraulic barriers. Transport of inorganic leachate contaminants through bentonite occurs by advection, diffusion or a combination of these two mechanisms. During the process of chemical solute transport through low permeability bentonite, the amount of cation exchange on the clay particle surface is directly related to the cation exchange capacity (CEC) of montmorillonite and other mineral constituents.
The process of diffusion and advection of various inorganic leachate contaminants through bentonite is thoroughly investigated in this study. Diffusion characteristics are of specific interest as they have a prominent effect on the long term properties of bentonite compared to advection. This is mostly true if the hydraulic conductivity of the material is less than 10-8 cm/s and if the thickness of the barrier is small. Chemical reactions in the form of cationic exchange on the clay particle surfaces has been incorporated in the analysis of the diffusion process. Adsorption-desorption (sorption) reactions of chemical compounds that influence the concentrations of inorganic leachates during transport in bentonite clay have been modeled using the Fick's fundamental diffusion theory. Partition coefficients of the solutes in pore space, which affect the retardation factor of various individual ions of chemical solutions, have been investigated during transient diffusion and advection processes.
Several objectives have been accomplished during this research study. An evaluation has been carried out of the hydraulic conductivity of bentonite with respect to single species salts and various combinations of electrolyte solutions. Diffusion properties of inorganic leachates through bentonite have been characterized in terms of apparent and effective diffusion coefficients. Time-dependent behavior of the diffusive ions has been analyzed in order to determine the total retention capacity of bentonite before electrical conductivity breakthrough and steady-state chemical stability are reached. An analytical solution of the attenuation of various inorganic ions concentrations through bentonite has been developed. Finally, recommendations were made for landfill liners exposed to highly concentrated inorganic leachates.
|
7 |
Morphological Control of Multifunctional Mesoporous Silica Nanomaterials for Catalysis ApplicationsSeong Huh January 2004 (has links)
Thesis (Ph.D.); Submitted to Iowa State Univ., Ames, IA (US); 19 Dec 2004. / Published through the Information Bridge: DOE Scientific and Technical Information. "IS-T 2397" Seong Huh. US Department of Energy 12/19/2004. Report is also available in paper and microfiche from NTIS.
|
8 |
Modeling adsorption of organic compounds on activated carbon : a multivariate approach / Modellering av adsorption av organiska förreningar i aktivt kol : ett multivariat angreppssättWu, Jufang January 2004 (has links)
Activated carbon is an adsorbent that is commonly used for removing organic contaminants from air due to its abundant pores and large internal surface area. This thesis is concerned with the static adsorption capacity and adsorption kinetics for single and binary organic compounds on different types of activated carbon. These are important parameters for the design of filters and for the estimation of filter service life. Existing predictive models for adsorption capacity and kinetics are based on fundamental “hard” knowledge of adsorption mechanisms. These models have several drawbacks, especially in complex situations, and extensive experimental data are often needed as inputs. In this work we present a systematic approach that can contribute to the further development of predictive models, especially for complex situations. The approach is based on Multivariate Data Analysis (MVDA), which is ideally suited for the development of soft models without incorporating any assumptions about the mathematical form or fundamental physical principles involved. Adsorption capacity and adsorption kinetics depend on the properties of the carbon and the adsorbate as well as experimental conditions. Therefore, to make general statements regarding adsorption capacity and kinetics it is important for the resulting models to be representative of the conditions they will simulate. Accordingly, the first step in the investigations underlying this thesis was to select a minimum number of representative and chemically diverse organic compounds. The next steps were to study the dependence of the derived affinity coefficient, β, in the Dubinin-Radushkevich equation on properties of organic compounds and to establish a new, improved model. This new model demonstrates the importance of adding descriptors for the specific interaction with the carbon surface to the size and shape descriptors. The adsorption capacities of the same eight organic compounds at low relative pressures were correlated with compound properties. It was found that different compound properties are important in the various stages of adsorption, reflecting the fact that different mechanisms are involved. Ideal adsorbed solution theory (IAST) in combination with the Freundlich equation was developed to predict the adsorption capacities of binary organic compound mixtures. A new model was proposed for predicting the rate coefficient of the Wheeler-Jonas equation which is valid for breakthrough ratios up to 20%. Finally, it was shown that the Wheeler-Jonas equation can be adapted to describe the breakthrough curves of binary mixtures. New models were proposed for predicting its parameters, the adsorption rate coefficients, and the adsorption capacities for both components of the binary mixture. Thus, multivariate data analysis can not only be used to assist in the understanding of adsorption mechanisms, but also contribute to the development of predictive models of adsorption capacity and breakthrough time for single and binary organic compounds.
|
9 |
Modeling adsorption of organic compounds on activated carbon : A multivariate approach / Modellering av adsorption av organiska förreningar i aktivt kol : Ett multivariat angreppssättWu, Jufang January 2004 (has links)
<p>Activated carbon is an adsorbent that is commonly used for removing organic contaminants from air due to its abundant pores and large internal surface area. This thesis is concerned with the static adsorption capacity and adsorption kinetics for single and binary organic compounds on different types of activated carbon. These are important parameters for the design of filters and for the estimation of filter service life. Existing predictive models for adsorption capacity and kinetics are based on fundamental “hard” knowledge of adsorption mechanisms. These models have several drawbacks, especially in complex situations, and extensive experimental data are often needed as inputs. In this work we present a systematic approach that can contribute to the further development of predictive models, especially for complex situations. The approach is based on Multivariate Data Analysis (MVDA), which is ideally suited for the development of soft models without incorporating any assumptions about the mathematical form or fundamental physical principles involved. </p><p>Adsorption capacity and adsorption kinetics depend on the properties of the carbon and the adsorbate as well as experimental conditions. Therefore, to make general statements regarding adsorption capacity and kinetics it is important for the resulting models to be representative of the conditions they will simulate. Accordingly, the first step in the investigations underlying this thesis was to select a minimum number of representative and chemically diverse organic compounds. The next steps were to study the dependence of the derived affinity coefficient, β, in the Dubinin-Radushkevich equation on properties of organic compounds and to establish a new, improved model. This new model demonstrates the importance of adding descriptors for the specific interaction with the carbon surface to the size and shape descriptors. The adsorption capacities of the same eight organic compounds at low relative pressures were correlated with compound properties. It was found that different compound properties are important in the various stages of adsorption, reflecting the fact that different mechanisms are involved. Ideal adsorbed solution theory (IAST) in combination with the Freundlich equation was developed to predict the adsorption capacities of binary organic compound mixtures. A new model was proposed for predicting the rate coefficient of the Wheeler-Jonas equation which is valid for breakthrough ratios up to 20%. Finally, it was shown that the Wheeler-Jonas equation can be adapted to describe the breakthrough curves of binary mixtures. New models were proposed for predicting its parameters, the adsorption rate coefficients, and the adsorption capacities for both components of the binary mixture. Thus, multivariate data analysis can not only be used to assist in the understanding of adsorption mechanisms, but also contribute to the development of predictive models of adsorption capacity and breakthrough time for single and binary organic compounds.</p>
|
10 |
Development of capacitive deionisation electrodes: optimization of fabrication methods and compositionSmith, Nafeesah January 2020 (has links)
>Magister Scientiae - MSc / Membrane Capacitive Deionisation (MCDI) is a technology used to desalinate water where a potential is applied to an electrode made of carbonaceous materials resulting in ion adsorption. Processes and materials for the production of electrodes to be applied in Membrane Capacitive Deionisation processes were investigated. The optimal electrode composition and synthesis approached was determined through analysis of the salt removal capacity and the rate at which the electrodes absorb and desorb ions. To determine the conductivity of these electrodes, the four point probe method was used. Contact angle measurements were performed to determine the hydrophilic nature of the electrodes. N2 adsorption was done in order to determine the surface area of carbonaceous materials as well as electrodes fabricated in this study. Scanning electron microscopy was utilised to investigate the morphology. Electrodes were produced with a range of research variables; (i) three different methods; slurry infiltration by calendaring, infiltration ink dropwise and spray-coating, (ii) electrodes with two different active material/binder ratios and a constant conductive additive ratio were produced in order to find the optimum, (iii) two different commercially available activated carbon materials were used in this study (YP50F and YP80F), (iv) two different commercially available electrode substrates were utilised (JNT45 and SGDL), (v) different slurry mixing times were investigated showing the importance of mixing, and (vi) samples were treated at three different temperatures to establish the optimal drying conditions.
Through optimization of the various parameters, the maximum adsorption capacity of the electrode was incrementally increased by 36 %, from 16 mg·g-1 at the start of the thesis to 25 mg·g-1 at the end of the study.
|
Page generated in 0.093 seconds