Nesse trabalho foi proposto investigar a estabilidade de fases do sistema zircônia-escândia (ScSZ) por meio do estudo termodinâmico de nanopartículas, na faixa de 0 a 20% em mol de Sc2O3, e a partir da introdução de um segundo aditivo (Dy2O3 e Nb2O5) ao ZrO2 contendo 10% em mol de Sc2O3 (10ScSZ). A estabilidade de fases do ScSZ foi avaliada com base em dados termodinâmicos determinados pelas técnicas de microcalorimetria de adsorção de água e calorimetria de dissolução à alta temperatura. As soluções sólidas foram sintetizadas pelo método de coprecipitação de hidróxidos. Dados termodinâmicos foram determinados para as formas polimórficas encontradas (monoclínica, tetragonal, cúbica, romboédrica β e γ) por difração de raios X no ScSZ. Esse trabalho resultou no diagrama de fases em nanoescala de tamanho de partícula-composição. Os efeitos produzidos pela introdução de aditivos na matriz de 10ScSZ foram investigados visando obter a possível estabilização da estrutura cúbica (c) e a supressão da transformação de fase c-β, característica do sistema binário. As composições foram sintetizadas por coprecipitação de hidróxidos e por reações em estado sólido para fins comparativos. Os materiais foram sinterizados convencionalmente e por sinterização assistida por campo elétrico. A estabilização completa da fase cúbica ocorreu a partir de teores molares de 1% de Dy2O3 e 0,5% de Nb2O5. O menor teor de Nb2O5 necessário para a estabilização da fase foi atribuído à provável formação da fase líquida durante a sinterização e ao menor tamanho do íon Nb5+. Os resultados de difratometria de raios X em alta temperatura e análise térmica mostraram que houve supressão da transição c-β. As amostras contendo 0,5% mol de Nb2O5 apresentaram valores de condutividade iônica similares aos do 10ScSZ sem aditivos em uma ampla faixa de temperatura com elevada estabilidade em um período de 170 h a 600 °C. / In this work, the phase stability of scandia-zirconia (ScSZ) system was investigated by the thermodynamic study of nanoparticles, within the range of 0 to 20 mol% Sc2O3, and by codoping of ZrO2-10 mol% Sc2O3 (10ScSZ) with Dy2O3 and Nb2O5. The phase stability of ScSZ was evaluated based on thermodynamic data collected by water adsorption microcalorimetry and high temperature oxide melt solution. Nanostructured zirconia-scandia solid solutions were synthesized by coprecipitaion method. Thermodynamic data were determined for ScSZ polymorphs (monoclinic, tetragonal, cubic, rhombohedral β and γ) found by X-ray diffraction. This systemic work resulted in an unprecedented phase diagram at the nanoscale of particle size-composition. The effects of additives on 10ScSZ were investigated aiming to stabilize the cubic (c) structure at room temperature and to suppress the characteristic cubic-rhombohedral β phase transformation. Compositions were prepared by coprecipitation and solid state reaction. Materials were sintered by conventional and spark plasma sintering. Full stabilization of the cubic phase was attained by 1 mol% Dy2O3 and 0.5 mol% Nb2O5 additions. The smallest Nb2O5 content required for cubic phase stabilization was attributed to liquid phase formation during sintering and to small ionic radius of Nb5+. Results of high temperature X-ray diffraction and thermal analysis show suppression of the c-β transformation. Samples containing 0.5 mol% Nb2O5 show total ionic conductivity similar to 10ScSZ without additives within a broad temperature range with high stability during 170 h at 600 °C.

Nesse trabalho foi proposto investigar a estabilidade de fases do sistema zircônia-escândia (ScSZ) por meio do estudo termodinâmico de nanopartículas, na faixa de 0 a 20% em mol de Sc2O3, e a partir da introdução de um segundo aditivo (Dy2O3 e Nb2O5) ao ZrO2 contendo 10% em mol de Sc2O3 (10ScSZ). A estabilidade de fases do ScSZ foi avaliada com base em dados termodinâmicos determinados pelas técnicas de microcalorimetria de adsorção de água e calorimetria de dissolução à alta temperatura. As soluções sólidas foram sintetizadas pelo método de coprecipitação de hidróxidos. Dados termodinâmicos foram determinados para as formas polimórficas encontradas (monoclínica, tetragonal, cúbica, romboédrica β e γ) por difração de raios X no ScSZ. Esse trabalho resultou no diagrama de fases em nanoescala de tamanho de partícula-composição. Os efeitos produzidos pela introdução de aditivos na matriz de 10ScSZ foram investigados visando obter a possível estabilização da estrutura cúbica (c) e a supressão da transformação de fase c-β, característica do sistema binário. As composições foram sintetizadas por coprecipitação de hidróxidos e por reações em estado sólido para fins comparativos. Os materiais foram sinterizados convencionalmente e por sinterização assistida por campo elétrico. A estabilização completa da fase cúbica ocorreu a partir de teores molares de 1% de Dy2O3 e 0,5% de Nb2O5. O menor teor de Nb2O5 necessário para a estabilização da fase foi atribuído à provável formação da fase líquida durante a sinterização e ao menor tamanho do íon Nb5+. Os resultados de difratometria de raios X em alta temperatura e análise térmica mostraram que houve supressão da transição c-β. As amostras contendo 0,5% mol de Nb2O5 apresentaram valores de condutividade iônica similares aos do 10ScSZ sem aditivos em uma ampla faixa de temperatura com elevada estabilidade em um período de 170 h a 600 °C. / In this work, the phase stability of scandia-zirconia (ScSZ) system was investigated by the thermodynamic study of nanoparticles, within the range of 0 to 20 mol% Sc2O3, and by codoping of ZrO2-10 mol% Sc2O3 (10ScSZ) with Dy2O3 and Nb2O5. The phase stability of ScSZ was evaluated based on thermodynamic data collected by water adsorption microcalorimetry and high temperature oxide melt solution. Nanostructured zirconia-scandia solid solutions were synthesized by coprecipitaion method. Thermodynamic data were determined for ScSZ polymorphs (monoclinic, tetragonal, cubic, rhombohedral β and γ) found by X-ray diffraction. This systemic work resulted in an unprecedented phase diagram at the nanoscale of particle size-composition. The effects of additives on 10ScSZ were investigated aiming to stabilize the cubic (c) structure at room temperature and to suppress the characteristic cubic-rhombohedral β phase transformation. Compositions were prepared by coprecipitation and solid state reaction. Materials were sintered by conventional and spark plasma sintering. Full stabilization of the cubic phase was attained by 1 mol% Dy2O3 and 0.5 mol% Nb2O5 additions. The smallest Nb2O5 content required for cubic phase stabilization was attributed to liquid phase formation during sintering and to small ionic radius of Nb5+. Results of high temperature X-ray diffraction and thermal analysis show suppression of the c-β transformation. Samples containing 0.5 mol% Nb2O5 show total ionic conductivity similar to 10ScSZ without additives within a broad temperature range with high stability during 170 h at 600 °C.

Glycerol and fructose are molecules that are readily available in substantial quantities fromthe biomass. In this work dehydration routes for valorization of these compounds wereinvestigated. Therefore, zirconia and titania based catalysts, and calcium phosphate materialswere prepared and evaluated in the glycerol dehydration in gas phase. Niobia-ceria mixedoxides and mesoporous Nb2O5-MeO2 (M = Ce, Zr, Ti) mixed oxides were prepared andtested in fructose dehydration reaction in aqueous phase. The surface acid-base properties ofthe studied catalysts were correlated to their catalytic performance.

Ce travail est en relation avec la thématique "Energies Propres". Le diméthoxyméthane estun composé adapté au stockage de l’hydrogène pour des applications mobiles, de par saforte teneur en hydrogène, sa très faible toxicité et son faible impact sur l'environnement.De ce fait, des catalyseurs mixtes, à base d’oxyde de vanadium et d’oxyde de titanesulfatés ont été préparés et testés dans la réaction d'oxydation sélective du méthanol enDMM, en vue de la production d'hydrogène. Les propriétés acides et redox de surface ontété corrélées aux performances catalytiques. Les mécanismes de réaction et l'identificationdes facteurs limitant l'activité et la sélectivité des catalyseurs ont été aussi étudiés. / This work is related to the subject “Clean Energy”. Dimethoxymethane (DMM) is asuitable H2 storage material for mobile application because of its high content of hydrogen,extremely low toxicity and environmentally benign. Therefore, sulfated vanadia-titania,sulfated binary vanadia-based and titania-based catalysts were prepared and evaluated inthe reaction of selective oxidation of methanol to DMM and further production ofhydrogen. The surface acidic and redox properties of the studied catalysts were correlatedto their catalytic performance. In addition, the reaction mechanisms and the identificationof factors limiting the activity and selectivity of catalysts were also studied.

Le glycérol et le fructose sont des molécules qui peuvent être extraites facilement de labiomasse et en des quantités substantielles. Ce travail de recherche porte sur la déshydratationcomme moyen de valoriser ces composés. C’est dans ce but que des catalyseurs supportés suroxydes de zirconium et de titane, ainsi que des matériaux de type phosphate de calcium, ontété préparés et testés pour la réaction de déshydratation du glycérol en phase gazeuse. Desoxydes mixtes de niobium et cerium ainsi que des oxydes mixtes mésoporeux de Nb2O5-MeO2 (M = Ce, Zr, Ti) ont été également préparés et cette fois-ci testés pour la réaction dedéshydratation du fructose en milieu aqueux. Dans les deux cas, les propriétés acido-basiquesde surface des catalyseurs étudiés ont été corrélées à leur efficacité catalytique. / Glycerol and fructose are molecules that are readily available in substantial quantities fromthe biomass. In this work dehydration routes for valorization of these compounds wereinvestigated. Therefore, zirconia and titania based catalysts, and calcium phosphate materialswere prepared and evaluated in the glycerol dehydration in gas phase. Niobia-ceria mixedoxides and mesoporous Nb2O5-MeO2 (M = Ce, Zr, Ti) mixed oxides were prepared andtested in fructose dehydration reaction in aqueous phase. The surface acid-base properties ofthe studied catalysts were correlated to their catalytic performance.

Ce travail est en relation avec la thématique "Chimie Verte" en particulier, le rôle de la catalyse,l’utilisation des matières premières renouvelables et l’élimination des produits nocifs.- Quatre échantillons commerciaux de zircone tungstatée de Mel-Chemicals.- deux séries de zircone tungstatée préparées par deux méthodes différentes avec une teneuren WO3 de 1 à 20 % en masse.- des oxydes binaires tels que WO3-ZrO2, B2O3-ZrO2, Al2O3-ZrO2, Ga2O3-ZrO2 et In2O3-ZrO2.- des oxydes binaires tels que WO3-Me2O3 (Me = B, Al, Ga et In) et finalement des oxydesternaires WO3/(Me2O3-ZrO2) (Me = B, Al, Ga et In) ont été étudiés et préparés lors de cettethèse.La performance catalytique de ces catalyseurs a été évaluée dans l’hydrolyse de la cellobiose, ladéshydratation du fructose et la réduction catalytique sélective des NOx. Les propriétés acides etredox de surface ont été corrélées aux performances catalytiques. En général, la conversion totale est liée à l’acidité des catalyseurs. Les catalyseurs les plus sélectifs pour la déshydratation du fructose et en deNOx sont ceux présentant une acidité modérée. / This work is related to the subject “Green Chemistry” in particular the role of the catalyst, the useof renewable raw materials and the decrease of hazardous materials.- Four commercial tungstated zirconia provided by Mel-Chemicals.- Two series of tungstated zirconia catalysts prepared by two different methods in a range of(1-20) WO3 wt.% loading- Binary zirconia-based oxides WO3-ZrO2, B2O3-ZrO2, Al2O3-ZrO2, Ga2O3-ZrO2 and In2O3-ZrO2.- Binary oxides WO3-Me2O3 (Me = B, Al, Ga and In) and ternary oxides WO3/(Me2O3-ZrO2)(Me = B, Al, Ga and In) were prepared and studied during my PhD thesis.The catalytic activity of these mixed oxide catalysts was evaluated in cellobiose hydrolysis, fructosedehydration and selective catalytic reduction of NOx. The catalysts were thoroughly characterizedin terms of their acidic and redox properties in order to find correlations between the identifiedactive sites and the catalytic properties. The total conversion is related in general to the acidity ofthe tested catalysts and the most selective catalysts for fructose dehydration and deNOx are thosewith moderate acidity.

Ce travail de thèse se focalise sur l'impact des propriétés acido-basiques des catalyseurs (quantité et force des sites) dans la production d’acroléine par couplage oxydant d’alcools en phase gazeuse. L'influence du rapport entre site acides et sites basiques des catalyseurs a été étudiée dans la condensation aldolique de l'acétaldéhyde et du formaldéhyde en acroléine, réalisée en conditions oxydantes. Les données et corrélations obtenues ont donné des informations indispensables à l’identification des paramètres qui doivent être modifiés afin d'améliorer la sélectivité en acroléine. La première réaction du procédé implique l'oxydation du méthanol et de l'éthanol respectivement en formaldéhyde et acétaldéhyde sur un catalyseur rédox de type FeMoOx.Ensuite, l'aldolisation croisée des deux aldéhydes et la déshydratation en acroléine sont effectuées sur des catalyseurs acido-basiques.Les alcools impliqués dans ce procédé pouvant dériver de la biomasse, cette nouvelle voie de production d'acroléine présente un intérêt élevé puisqu'elle peut remplacer la production actuelle d'acroléine basée sur des ressources fossiles (aujourd'hui l’acroléine est produite industriellement par oxydation du propylène).Le catalyseur optimal doit présenter des caractéristiques amphotères avec une quantité similaire de sites basiques et acides. Une présence modérée et équilibrée de sites acides et basiques améliore le rendement en acroléine et déplace à plus haute température la production des oxydes de carbone. Parmi tous les catalyseurs étudiés, et grâce à ses propriétés acido-basiques spécifiques, MgO supporté sur silice a été identifié comme étant le meilleur catalyseur pour la condensation aldolique des aldéhydes en acroléine en conditions oxydantes / The present work focuses on the impact of the amount and strength of acidic and/or basic sites on the yield of acrolein produced by alcohols oxidative coupling in gas phase. The influence of acid/base ratio of catalytic sites has been studied in the aldol condensation of acetaldehyde and formaldehyde to acrolein performed in oxidizing conditions. The obtained data and correlations supplied valuable information to understand which parameters have to be modified to improve the acrolein selectivity. The first reaction of the process implies methanol and ethanol oxidation respectively to formaldehyde and acetaldehyde on a FeMoOx redox catalyst. Then the cross-aldolization of the two aldehydes and the dehydration to acrolein is performed on acid/base catalysts. Because the alcohols involved in this process can be bio-sourced, this new route to produce acrolein presents a very high interest, since it can replace the current fossil-based acrolein production (nowadays industrially produced by oxidation of propylene). The optimal catalyst should present amphoteric features with a similar amount of both basic and acidic sites. A moderate and balanced presence of acidic and basic sites improves the acrolein yield and the production of carbon oxides is significantly increased only at high temperature. Among all studied catalysts, MgO supported on silica has been identified as the best catalyst for aldol-condensation of aldehydes to acrolein in oxidizing conditions thanks to a given ratio of basic to acidic sites

Les carbones poreux ont été largement utilisés et étudiés ces dernières années. Ce travail de recherche porte sur la préparation de matériaux carbonés mésoporeux modifiés ou non par de l'azote. Tout d'abord, un carbone mésoporeux pur a été synthétisé. Puis des atomes d'azote ont été introduits dans ce carbone mésoporeux par deux méthodes de dopage ("in situ" et "post-synthèse" respectivement). La comparaison des propriétés acido-basiques dans des conditions différentes pour les trois types de matériaux mésoporeux carbonés, avec ou sans diazote, a été faite grâce à des techniques calorimétriques. Ces carbones mésoporeux ont aussi été utilisés dans l'adsorption de polluants, le stockage de l'hydrogène et en tant que supports pour les métaux précieux et l'oxyde de fer en catalyse. Les différentes performances dans ces applications ont été mises en relation avec les différentes propriétés structurelles et surfaciques causées par le dopage au diazote / Porous carbon materials are widely used and studied in recent years. In this work, three kinds of mesoporous carbon materials were prepared. Firstly, cost-effective pure mesoporous carbon was synthesized. Then nitrogen atoms were introduced into the mesoporous carbon by “in situ” and “post” doping methods respectively. The comparisons of the acid-base properties in different conditions of the three kinds of mesoporous carbon materials with or without nitrogen were studied and revealed by different calorimetric techniques. The three kinds of mesoporous carbons were also applied in pollutants adsorption, hydrogen storage and as supports of precious metals and iron oxide in catalysis. The different performances in applications were related to the different structural and surface properties caused by the N-doping