No description available.

No description available.

No description available.

Operation of Unmanned Air Vehicles (UAVs) has increased significantly over the past few years. However, routine operation in non-segregated airspace remains a challenge, primarily due to nature of the environment and restrictions and challenges that accompany this. Currently, tight human control is envisaged as a means to achieve the oft quoted requirements of transparency , equivalence and safety. However, the problems of high cost of human operation, potential communication losses and operator remoteness remain as obstacles. One means of overcoming these obstacles is to devolve authority, from the ground controller to an on-board system able to understand its situation and make appropriate decisions when authorised. Such an on-board system is known as an Autonomous System. The nature of the autonomous system, how it should be designed, when and how authority should be transferred and in what context can they be allowed to control the vehicle are the general motivation for this study. To do this, the system must overcome the negative aspects of differentiators that exist between UASs and manned aircraft and introduce methods to achieve required increases in the levels of versatility, cost, safety and performance. The general thesis of this work is that the role and responsibility of an airborne autonomous system are sufficiently different from those of other conventionally controlled manned and unmanned systems to require a different architectural approach. Such a different architecture will also have additional requirements placed upon it in order to demonstrate acceptable levels of Transparency, Equivalence and Safety. The architecture for the system is developed from an analysis of the basic requirements and adapted from a consideration of other, suitable candidates for effective control of the vehicle under devolved authority. The best practices for airborne systems in general are identified and amalgamated with established principles and approaches of robotics and intelligent agents. From this, a decision architecture, capable of interacting with external human agencies such as the UAS Commander and Air Traffic Controllers, is proposed in detail. This architecture has been implemented and a number of further lessons can be drawn from this. In order to understand in detail the system safety requirements, an analysis of manned and unmanned aircraft accidents is made. Particular interest is given to the type of control moding of current unmanned aircraft in order to make a comparison, and prediction, with accidents likely to be caused by autonomously controlled vehicles. The effect of pilot remoteness on the accident rate is studied and a new classification of this remoteness is identified as a major contributor to accidents A preliminary Bayesian model for unmanned aircraft accidents is developed and results and predictions are made as an output of this model. From the accident analysis and modelling, strategies to improve UAS safety are identified. Detailed implementations within these strategies are analysed and a proposal for more advanced Human-Machine Interaction made. In particular, detailed analysis is given on exemplar scenarios that a UAS may encounter. These are: Sense and Avoid , Mission Management Failure, Take Off/Landing, and Lost Link procedures and Communications Failure. These analyses identify the nature of autonomous, as opposed to automatic, operation and clearly show the benefits to safety of autonomous air vehicle operation, with an identifiable decision architecture, and its relationship with the human controller. From the strategies and detailed analysis of the exemplar scenarios, proposals are made for the improvement of unmanned vehicle safety The incorporation of these proposals into the suggested decision architecture are accompanied by analysis of the levels of benefit that may be expected. These suggest that a level approaching that of conventional manned aircraft is achievable using currently available technologies but with substantial architectural design methodologies than currently fielded.

Interpretation of large-scale color infrared and color aerial photography can be a labor and cost-effective means for inventorying and monitoring rangelands while maintaining accuracy. Ground measurements of vegetation cover at Organ Pipe Cactus National Monument were taken in 1975 and 1984. Large-scale (1:1200) color and color infrared aerial photo estimates were compared to these ground measurements through regression and correlation to check photo accuracy. Relationships between photo estimates and ground measurements of total vegetation and shrub cover were strong when using either film type. Color infrared photo estimates corresponded better with ground measurements for both tree cover and cactus cover than color photo estimates. Large-scale aerial photography is also useful for determining some of the causes of vegetation change. Evidence gathered from both sets of photos suggested that vegetation change at OPCNM was largely the result of domestic livestock removal and short-term climatic fluctuations.

Aerial photography obtained by UAVs (Unmanned Aerial Vehicles) is an emerging market for civil applications. Small UAVs are believed to close gaps in niche markets, such as acquiring airborne image data for remote sensing purposes. Small UAVs will be able to fly at low altitudes, in dangerous environments and over long periods of time. However, the small lightweight constructions of these UAVs lead to new problems, such as higher agility leading to more susceptibility to turbulence and limitations in space and payload for sensor systems. This research investigates the use of low-cost fisheye lenses to overcome such problems which theoretically makes the airborne imaging less sensitive to turbulence. The fisheye lens has the benet of a large observation area (large field of view) and doesn't add additional weight to the aircraft, like traditional mechanical stabilizing systems. This research presents the implementation of a fisheye lens for aerial photography and mapping purposes, including theoretical background of fisheye lenses. Based on the unique feature of the distortion being a function of the viewing angle, methods used to derive the fisheye lens distortion are presented. The lens distortion is used to rectify the fisheye images before these images can be used in aerial photography. A detailed investigation into the inner orientation of the camera and inertial sensor is given, as well as the registration of airborne collected images. It was found that the attitude estimation is critical towards accurate mapping using low quality sensors. A loosely coupled EKF filter applied to the GPS and inertial sensor data estimated the attitude to an accuracy of 3-5° (1-sigma) using low-cost sensors typically found in small UAVs. However, the use of image stitching techniques may improve the outcome. On the other hand, lens distortion caused by the fisheye lens can be addressed by rectification techniques and removed to a sub-pixel level. Results of the process present image sequences gathered from a piloted aircraft demonstrating the achieved performance and potential applications towards UAVs. Further, an unforeseen issue with a vibrating part in the lens lead to the need for vibration compensation. The vibration could be estimated to ±1 pixel in 75% of the cases by applying an extended Hough transform to the fisheye images.

Thesis (M.S.) in Forestry--University of Maine, 2004. / Includes vita. Includes bibliographical references (leaves 74-80).

Thesis (Ph.D.) - University of Glasgow, 2009. / Ph.D. thesis submitted to the Faculty of Physical Sciences, Department of Geographical and Earth Sciences and the Faculty of Arts, Department of Archaeology, University of Glasgow, 2009. Includes bibliographical references. Print version also available.

Thesis (B.S.)--Rochester Institute of Technology, 1983. / Typescript. Includes bibliographical references (leaves 18-22).

Thesis (Ph. D.)--University of Wisconsin--Madison, 1967. / Vita. Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references.