In the studies underlying this thesis, various source tracing techniques were applied to environmental samples from the Baltic region. Comprehensive sampling and analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in surface sediments in Swedish coastal and offshore areas resulted in a unique data set for this region. Nearly 150 samples of surface sediments were analyzed for all tetra- to octa-chlorinated PCDD/Fs. The levels showed large spatial variability with hotspots in several coastal regions. Neither Sweden nor the EU has introduced guideline values for PCDD/Fs in sediment, but comparisons to available guidelines and quality standards from other countries indicate that large areas of primarily coastal sediments may constitute a risk to marine organisms. Multivariate pattern analysis techniques and receptor models, such as Principal Component Analysis (PCA) and Positive Matrix Factorization (PMF), were used to trace sources. These analyses suggested that three to six source types can explain most of the observed pattern variations found in the sediment samples. Atmospheric deposition was suggested as the most important source to offshore areas, thus confirming earlier estimates. However, spatial differences indicated a larger fraction of local/regional atmospheric sources, characterized by PCDFs, in the south. This was indicated by the identification of several patterns of atmospheric origin. In coastal areas, the influence of direct emission sources was larger, and among these, chlorophenol used for wood preservation and emissions from pulp/paper production and other wood related industry appeared to be most important. The historic emissions connected to processes involving chemical reactions with chlorine (e.g. pulp bleaching) were found to be of less importance except at some coastal sites. The analysis of PCDD/Fs in Baltic herring also revealed spatial variations in the levels and pollution patterns along the coast. The geographical match against areas with elevated sediment levels indicated that transfer from sediments via water to organisms was one possible explanation. Fugacity, a concept used to predict the net transport direction between environmental matrices, was used to explore the gas exchange of hexachlorocyclohexanes (HCHs) and polychlorinated biphenyls (PCBs) between air and water. These estimates suggested that, in the Kattegat Sea, the gaseous exchange of HCHs primarily resulted in net deposition while PCBs were net volatilized under certain environmental conditions. The study also indicated that, while the air concentrations of both PCBs and γ-HCH are mostly dependent upon the origin of the air mass, the fluctuations in α-HCH were primarily influenced by seasonal changes.

Une compréhension approfondie et un meilleur contrôle de l'auto-assemblage des copolymères diblocs (séquencés) et de leurs complexes à l'interface air/eau permettent la formation contrôlée de nanostructures dont les propriétés sont connues comme alternative à la nanolithographie. Dans cette thèse, des monocouches obtenues par les techniques de Langmuir et de Langmuir-Blodgett (LB) avec le copolymère dibloc polystyrène-poly(4-vinyl pyridine) (PS-PVP), seul ou complexé avec de petites molécules par liaison hydrogène [en particulier, le 3-n-pentadécylphénol (PDP)], ont été étudiées. Une partie importante de notre recherche a été consacrée à l'étude d'une monocouche assemblée atypique baptisée réseau de nanostries. Des monocouches LB composées de nanostries ont déjà été rapportées dans la littérature mais elles coexistent souvent avec d'autres morphologies, ce qui les rend inutilisables pour des applications potentielles. Nous avons déterminé les paramètres moléculaires et les conditions expérimentales qui contrôlent cette morphologie, la rendant très reproductible. Nous avons aussi proposé un mécanisme original pour la formation de cette morphologie. De plus, nous avons montré que l'utilisation de solvants à haut point d’ébullition, non couramment utilisés pour la préparation des films Langmuir, peut améliorer l'ordre des nanostries. En étudiant une large gamme de PS-PVP avec des rapports PS/PVP et des masses molaires différents, avec ou sans la présence de PDP, nous avons établi la dépendance des types principaux de morphologie (planaire, stries, nodules) en fonction de la composition et de la concentration des solutions. Ces observations ont mené à une discussion sur les mécanismes de formation des morphologies, incluant la cinétique, l’assemblage moléculaire et l’effet du démouillage. Nous avons aussi démontré pour la première fois que le plateau dans l'isotherme des PS-PVP/PDP avec morphologie de type nodules est relié à une transition ordre-ordre des nodules (héxagonal-tétragonal) qui se produit simultanément avec la réorientation du PDP, les deux aspects étant clairement observés par AFM. Ces études ouvrent aussi la voie à l'utilisation de films PS-PVP/PDP ultraminces comme masque. La capacité de produire des films nanostructurés bien contrôlés sur différents substrats a été démontrée et la stabilité des films a été vérifiée. Le retrait de la petite molécule des nanostructures a fait apparaître une structure interne à explorer lors d’études futures. / Deeper understanding and control of the self-assembly of diblock copolymers and their complexes at the air/water interface allow the formation of nanopatterns with known properties to provide a competitive substitute to nanolithography. In this dissertation, Langmuir and Langmuir-Blodgett (LB) monolayers obtained from polystyrene-poly(4-vinyl pyridine) diblock copolymers (PS-PVP), alone and hydrogen-bonded by various small molecules [particularly, 3-n-pentadecylphenol (PDP)], have been extensively investigated. A major part of the research was devoted to the study of an uncommon monolayer pattern that we term the nanostrand network. LB monolayers consisting of nanostrands have sometimes been reported in the literature, but are often coexistent with other morphologies, which is not useful for potential applications. We have determined the molecular parameters and experimental conditions that control this morphology, making it highly reproducible, and have proposed a novel mechanism for the formation of this morphology. In addition, we have shown that the use of high-boiling spreading solvents, not usually used for Langmuir film preparation, can improve the nanostrand order. By investigation of a wide range of PS-PVP’s with various block ratios and molecular weights, with and without PDP present, we have established the composition dependence of the main LB morphology types (planar, nanostrand, nanodot) and the influence of each type on spreading solution concentration. This led to an extensive discussion concerning the mechanisms of morphology formation, including kinetic, molecular association, and dewetting contributions. We have also shown that the isotherm plateau transition for nanodot-forming PS-PVP/PDP is related to an order–order transition that occurs simultaneously with PDP reorientation, both aspects being clearly observed by AFM. These studies also form the basis for the use of ultrathin PS-PVP/PDP films as templates. The ability to produce well-controlled nanopatterned films on various substrates has been demonstrated, and film stability has been verified. Removal of small molecules from the nanostructures has revealed the appearance of new substructure of interest for further study.

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

The thesis is engaged in complete reconstruction of a heat system of a family house with higher heat loss, i.e. heat source, piping and radiators. As a heat source is chosen air-water heat pump. Heat system is designed with panel radiators with regard to minimum building interventions. A required power for hot water heating is calculated and selected a heat pump from suitable power range in combination with storage tank with hot water tank. The bivalent point is determined, as backup source are heating elements installed in storage tank. Drawings and circuit diagrams with safety elements are attached. In the end is calculation of estimated return.

The topic of my diploma thesis is air-water heat pumps. The diploma thesis contains three parts. In the first part I describe the theory of air-water heat pumps. In the second part I consider two variants of heating, hot water heating and pool water heating using air-water heat pumps in the family house, Révova. The third experimental part is focused on observation of operational process and calculation of heat factors of air-water heat pump while in the heating model. The calculated heating factors are then compared to the heating factors from the manufacturer's graph.

The main aim of this master project is to design a new nursery school with a parking lot and playground in Jinačovice. The building has single floor and flat green roof. It is divided into three main parts: middle part, class A, class B. The middle part includes a wind lobby, corridor and auxiliary rooms such as cleaning room, staff rooms, storage and utility room. Almost identical classes A and B include a day room/play room, changing room, children washroom, storage of toys and kitchen. The vertical loadbearing masonry is made of Porotherm ceramic blocks. The envelope walls insulated with ETICS. The horizontal loadbearing structure is made of Spiroll panels. Heating energy is supplied by two air-water heat pump. Ventilation is provided by air conditioning with heat recovery. Shading is provided by external louvers. The project was carried out in AutoCAD.