Thesis "Apartment building with amenities" is developed in the form of project documentation containing all requirements according to applicable regulations. The proposed facility is located in Brno, in Stránice district. It is a four story building with flat roof and no basement. On the ground floor there are medical center, technical facilities and clubrooms. Housing units are proposed in the second to the fourth floor.

This Master’s thesis deals with the technological project of the new building apartment house in Brno. This work includes technical reports, site equipment, wider transport relations,budget calculation, time planning, inspection and test plan, mechanical assembly, contract for work, safety plan and risks on the building.

Theme of diploma thesis is a Heavy wooden frame in apartment development. The thesis is concerned with a proposal of residential building project, which has the possibility of accommodation for people in rural areas near larger city. This is a residential building with 3 storeys. The first floor is completely wheelchair friendly and there is a flat for the disabled (1+kc). In the first and second floor is placed 7 flats (3x 1+kc, 2x 2+kc, 2x 3+kc). On the third floor there are two flats (4+kc) with entry to the terrace. Building is placed on the base zone and footing. The structural system is consists of a heavy wooden frame. The ceiling structure consists of wood joists anchored into girder frame. In the building there is a flat walkable roof in place of terrace of the apartment on the third floor, otherwise is roof construction consisting of slanting roof with wooden roof truss.

The aim of my master's thesis is a project of a new apartment building on a sloped site at a level of the documentation for the structure realization. The building is partly basement with four above-ground floor. Individual floors up recede and are roofed with flat roofs. The structural system of the basement part is made up of permanent shuttering and the above-ground part is made up wall of cross laminated timber construction panels KLH. The project of the building is in accordance with the development plan of Kopřivnice and with the current street built. The work puts great emphasis on layout including security of the construction in terms of statics, architecture, energy savings and safety at utilizing the structure.

Thesis elaborates project documentation for new residential building in Prague 8 - Karlín. The building has five floors without a basement. In 1.NP are located collective garages for cars, garage - parking for bicycles and motorcycles, a cellar for residential units and the main entrances to the building. 2.NP - 5.NP is reserved for housing. The apartment building has three types of units with different layout arrangement - 2 + kk, 3 + kk, 4 + kk and one unit for persons with disabilities. Each apartment has its own entrance to the balcony. Inputs to the roof are placed above the 5th floor Foundations are designed as footings under reinforced concrete columns with a combination of the base plate. The building is in 1.NP reinforced concrete combined with brick infills. 2.NP - 5.NP is brick. The roof is designed flat.

Within the frame of my master's thesis I processed a project documentation for a construction of an apartment house in Brno – Židenice. The building is unattached and has 7 floors. On the ground floor there are four individual garages, cellar cubicles and a utility room. There are apartments on all other floors. On the highest floor, there is situated a singular apartment with outdoor terrace and vegetation area. The building is founded on strips made of reinforced concrete, vertical load-bearing structure is made of cermic blocks, floor structure is made of hollow core slabs and staircase is also made of prefabricated elements. The house is insulated with contact thermal insulation made of mineral wool. During the process of creating the projet, I followed all the requirements of actual regulations and legal enactments, to provide sufficient mechanical endurance and stability, health safety of the inner space as well as safety of the natural environment.

The valuation of real estate is a process that is carried out to determine the normal or administrative prices of real estate. The first part of the work discusses the basic concepts in the valuation of real estate, building understanding of the problem. It describes the methods of valuation in accordance with Act No. 151/1997 Coll., on the valuation of assets and its implementing rules in the current text, this is the cost method, earning method and their combinations, and valuation of an apartment building by comparison method of each apartment. In the next chapter, these methods are used for the valuation of the apartment building in Brno - Cernovice. The output of this valuation is the price established by combining the cost and earning method and price of the apartment building determined by the price sum of apartments from the comparison method. In the conclusion of this work there is a comparation of this prices and rating their difference.

Doctoral thesis Life cycle cost model of an apartment building includes the process of modeling, starting with the theoretical definition and ending up with testing it for practical usage, the error measurement and its recalling abilities. The aim is to construct a model for simulating the life cycle costs of an apartment building during the phase of purchasing it followed with the simulation of life cycle costs having the conditions defined in advance. The method of the model construction shall be found in stating an appropriate representative, setting the entrance parameters and defining the condition under which it is supposed to work. The last step is to test the created model in order to find possible mistakes. Mathematically-statistical methods shall be used for setting the model. Another researching method comprises of creating several exemplary studies which shall correct the costs model and expand its applicability.

Master thesis of "APARTMENT BUILDING IN HUMPOLEC" is composed in the form of project documentation. The building is designed as a dweling house and it is situated in the centre of Humpolec city. The building has four floors and no basement. Supporting structure consists of a ceramic masonry and concrete elements. The drawings are processed in ArchiCAD program.

The aim of this thesis is the design of an youth apartment building in the range of designing the documentation for building construction. The building is situated on the flat plot no. 873/21 in the cadastral area „Horní Heršpice“ 612065. In the building there is 42 rooms, 2 wheelchair-accessible rooms and 4 student apartments. The capacity of the building is designed to accommodate 86 students under 18 years and 16 students older than 18 years. In the building there is also a dining room, a library, a fitness room and a gym for free time. It is partly a two-storey and partly a four-storey building without a basement, roofed by a flat roof. Masonry is designed from clay blocks and floor slab is designed by a cast-in-place reinforced concrete floor structure.