Project of master thesis solves brand new residential polyfunctional house with bike shop. The main object is a four-storyed, designed as a monolithic skeleton construction. The building is located in Opuštěná Street, Brno. The project is developed on the basis of project documentation and technical data, delivered by the designer in the behalf of investor requirements. Main goal of this project seeks to approach to real solution of the construction site. It is very important to compare also financial aspects, not only the technological. Last but not least, time requirements of construction plan and factual requirements of the customer. Constructive-technological project contains especially: technical report, site facilities, technologic regulation, schedule, financial budget, control and test plan, design of machinery, safety and health protection etc.

This thesis describes the design of a low-cost Accommodation for Young people. It is an apartment building on 5 floors above ground, designed primarily as a starter housing for young people. The first floor is completely wheelchair friendly and there are 3 apartments for for wheelchair users (1x2+KK, 2x1+ KK) . In the second and third floors is a total of 20 flats (1 bedroom apartment). The fourth and fifth floor consists of 5 maisonette flats (2+KK) with access to the terrace. The house is based on the foundation walls and footings. The structural system consists of load-bearing walls POROTHERM and internal reinforced concrete columns and beams. Ceiling construction consists of of panels SPIROLL and a reinforced concrete slab. The house has two roof construction, flat monotube roof (terrace) and a sloped gable roof formed by wooden rafters. The house is situated on a large grassy area, which forms the park for rest and relaxation. On the property is a parking lot along access roads with a total of 32 parking spaces.

The thesis deals with a Polyfunctional house. It´s lately erected building of self-standing block of flats with a pizzeria situated in Humpolec, Hradská Street. The building is designed as a four-storeyed cellarless house with eight separate housing units for thirty permanently living people. The pizzeria designed for thirty guests and five employees is included to the property. It´s situated in the firtst floor. Residential part and business premises are separated from each other operationally independent and accessible main entrance. The building is covered with a flat roof structures. The building plan uses load-bearing vertical structure of ceramic system Porotherm, horizontal structure consists of prestressed and reinforced concrete panels Spiroll board.

The topic of this master´s thesis deals with a structural and technological preparation of implementation of apartment building in Jihlava. The Apartment building is designed as a building including garages and dwelling units. In the lower part of the building is constructed of reinforced concrete combined system, which is from the 2.PP to 2.NP. The building is designed as a brick system with concrete ceilings on the upper floors. The lower 3 floors are designed as parking garage and a remaining six floors are designed as apartments. The project deals with the entire construction of buildings from technological processes, time and financial plan to safety during construction.

This diploma thesis ‘multi-functional‘ building is elaborated in form of a project documentation fulfilling all requirements in accordance with valid directives. The project refers to a detached multi-functional new-build placed on a moderate slope in Kralupy nad Vltavou. The building includes a basement and four floors overground. This multi-functional house will be used as an apartement building with a café, containing eleven housing units – apartments. One of units on the first floor is designed as handicapped-accessible. Café with facilities and a separate entrance for public will be located in basement. Overground, outer and interior bearing walls are meant to be made of Porotherm system. The underground wil be made of concrete blocks ‘Best’. Ceiling construction will be fabricated from prestressed ceiling concrete panels ‘Spiroll‘. Roofing is maded of two parts, both are pent roofs with angle of 7°. The roof is designed as a double wall, where for the outer shell is used a wooden construction coated with concrete roofing panels ‘Bramac’. The inner shell is composed of a suspended ceiling with insulation. Part of the project is a construction of paved areas aside the building and fencing.

This thesis describes the design of plumbing in an apartment building with commercial space in Ilava. The theoretical part is devoted to the design of the container hot drinking water and it´s possible alternatives. The work also focuses on possible solutions diploma work. Computational part of a project proposal contains sewage and rainwater drainage, water supply systems and connecting the building to the existing network hardware. It is a residential house, which is in part intended for commercial premises and the second part is intended for housing. The building has four floors and no basement.

The thesis deals with plumbing in a residential building in Brno. The theoretical part is devoted to the development of residential bathroom units over time. The experimental part is focused on versions of such core units. The work also focuses on possible options and requested specifics. The project part solves sanitary equipment and installation of a residential building in the selected case. It is a multi-storey building which is intended for long-term living.

The final thesis contains selected parts of construction technological project, this project are defined by a apartment building complex in Pardubice, Dubinská. This thesis deals with first two buildings with four flours and a basement. Coordination site plan, time and financial schedule including machinery setting, a study of main technological phases, construction site facility project, main technological machinery design, technological standard and time schedule, technological regulation for basement monolithic constructions, inspection and trial schedule with drawing of facing to it are regarded as parts of construction technological project.

This thesis is concerned with the evaluation of sustainable construction. It is a multi-criteria evaluation focused on building environmental, socio-cultural sphere, economics and management. The reviews I chose passive apartment house in two of designs. The purpose of this study is to compare the standard insulated brick buildings and in our non-traditional wood construction. At the beginning there will explain the basic concepts associated with the topic. After that, the problems of the sustainable construction and environmental impact assessment, which will describe the basic concepts, methodologies, criteria, description of evaluation. The last part will be made an example of evaluation SBToolCZ brick and wooden buildings passive residential Duma. Comparison of both results achieved certification and think about the advantages or disadvantages of both options. The aim of this thesis is dedicated readers and explain to them the issues of this topic.

This diploma thesis deals with health-technical and gas piping in the asylum building. The topic Rain Water Handling is the theoretical part where the usage of water is discussed according to the legal regulations and its functionality. The computational and project part deals with sewerage, water and gas distribution system in this two floors non-cellar asylum building. This bachelor thesis is written according to Czech and European regulations