No description available.

Typescript (photocopy). / Digitized by Kansas Correctional Industries

In 1987, Congress authorized a 5 year $150 million dollar research program called the Strategic Highway Research Program (SHRP). SHRP was divided into four major areas, including the asphalt research program. The asphalt research program was divided into six major research contracts, one such contract, SHRP-003A was called Performance Related Testing and Measuring of Asphalt Aggregate Interaction and Mixtures. Oregon State University performed the portion of this contract related to the development and validation of accelerated test procedures for aging, low temperature cracking, and moisture sensitivity of asphalt-aggreagte mixtures. This thesis contains five independent papers that discuss elements of the development, validation, and or implementation of these accelerated test procedures. In the first paper, the relationship between field performance and laboratory aging properties of asphalt-aggregate mixtures is discussed, including the relative importance of asphalt binder and aggregate type on the amount of aging experience. Based on this work recommended aging procedures are presented to simulate different environmental conditions and pavement age. The second paper makes use of the large body of resilient modulus data conducted as part of the SHRP research effort to compare data obtain in the diametral and the triaxial mode. It is not possible to give a relationship between triaxial and diametral resilient modulus, without describing specimen geometry and other test conditions. The third paper discusses the effect of aging on the thermal cracking properties of asphalt-aggregate mixtures. The temperature at which aging occurs affects the way cold temperature fracture properties change with time. Low temperatures result in quenching of the aging process, while high temperatures result in continued aging. The fourth paper discusses work conducted in association with the Oregon Department of Transportation to extend the environmental conditioning system (ECS) test procedure for moisture assessment to open graded mixtures. Comparison in the ECS of mixtures with and without anti-strip agents added indicates that they don't always decrease moisture damage potential. The final paper presents a discussion of asphalt chemistry and its relationship to asphalt-aggregate mixture performance. Using the SHRP asphalt model, aging and low temperature performance data collected at Oregon State University is explained. / Graduation date: 1995

The Environmental Conditioning System (ECS) was designed to evaluate the water sensitivity of asphalt concrete mixtures. The ECS subjects asphalt concrete specimens to a series of conditioning cycles including water flow, elevated and/or lowered temperature, and repeated axial loading. The purpose of this research was to: (1) evaluate the ECS test apparatus and procedure, and (2) determine whether the ECS can identify asphalt concrete mixtures that will perform well, or poorly, in the field with regard to water sensitivity. Twelve primary field test sections were identified. For each section, specimens were prepared in the laboratory using the original mix design (or the mix design identified by extraction), and the original aggregates, asphalts, and admixtures. Specimens were tested using two procedures: the ECS and the Oregon State University (OSU) wheel tracker. Field cores were used to evaluate in-situ mixture performance. Nine additional mixtures that have historically experienced water damage were tested in a limited secondary test program. Analyses were performed to determine the mixture properties that were significant in the prediction of mixture performance in the ECS. Mixture type was consistently the most significant predictor of ECS modulus ratio (change in mixture stiffness), degree of visual stripping, and binder migration, which were the performance indicators for water sensitivity evaluated in the ECS. Additional analysis indicated the existence of correlations among the ECS response variables. Significant correlations were found between the coefficient of water permeability and the degree of visual stripping; and between specimen deformation and the degree of visual stripping and binder migration. Mixture performance was compared between the ECS and the OSU wheel tracker and the field. Results indicate that the ECS test procedure can distinguish the relative performance of mixtures, with regard to water sensitivity, and mixture performance in the ECS correlates well with performance in the OSU wheel tracker. No correlation was found between mixture performance in the ECS and mixture performance in the field for the primary test sections. However, the primary field sections are relatively young, and water damage is expected to manifest itself in the future in those pavements identified as water sensitive by the ECS. The ECS predicted failure in the secondary mixtures which were identified as having had poor performance with regard to water sensitivity. / Graduation date: 1994

Thermal cracking of asphalt concrete pavements is responsible for millions of dollars in annual maintenance and rehabilitation costs in the United States and Canada. Thermal cracking is typically associated with low temperatures in northern climates and at high elevations. However, another form of thermal cracking, known as thermal fatigue cracking, has been proposed by several researchers as a potential mode of distress in regions with relatively moderate climates but significant differences in high and low daily temperatures. The primary purpose of the research reported herein was to evaluate the possibility of occurrence of the thermal fatigue cracking mode of distress. A secondary objective was to identify a suitable laboratory test procedure to facilitate a mechanistic analysis of the thermal fatigue mode of distress. In light of these objectives, several laboratory test procedures were evaluated in the bituminous materials laboratory at Oregon State University (OSU). The test procedures evaluated included the phenomenological Thermal Stress Restrained Specimen Test (TSRST), the Energy Rate Integral Test (ERIT), the Direct Tension Test under constant rate of extension (DTT), and the Direct Tensile Creep Test (DTCT). The TSRST results were used to evaluate the possibility of occurrence of the thermal fatigue mode of distress. The ERIT, DTT, and DTCT procedures were evaluated with respect to the identification of a suitable laboratory test procedure to facilitate a mechanistic analysis of thermal fatigue. The results from the laboratory test program indicate that thermal fatigue distress in asphalt concrete mixtures is not a viable mode of distress in the absence of environmental aging. Based on the data presented herein and the results of previous researchers, it is evident that distress often attributed to thermal fatigue cracking is more likely the result of low temperature cracking of environmentally aged mixtures, and/or subgrade-related distress; fatigue distress due to thermal loading of semi-restrained pavements does not occur. / Graduation date: 1993

Today, a large quantity of waste is generated from the replacement of residential and commercial roofs. Many of the roofs being upgraded with previously constructed from asphalt shingles. Recycled Asphalt Shingles (RAS) contain nearly 30% of asphalt cement by mass, which can be a useful additive to asphalt pavements. In addition, shingles can offer significant potential savings through recycling and recovery as a construction material in flexible pavement. Currently, one and a half million tons of roofing shingle waste is generated each year in Canada related to the replacement of residential and commercial roofs and 90% of this valuable material is sent to landfills. If engineered properly, the addition of RAS into Hot Mix Asphalt (HMA) can provide significant benefits. The University of Waterloo’s Centre for Pavement and Transportation Technology (CPATT) is committed to working with public and private sector partners to develop sustainable technologies for the pavement industry. Using RAS in HMA can lead to economical, environmental and social benefits. Examples of which are reduced waste going to landfills and a reduction in the quantity of virgin material required. This research has involved the Ontario Centres of Excellence (OCE) and Miller Paving Limited. It was conducted to evaluate the performance of HMA containing RAS in both field and laboratory tests. A varying percentage of RAS was added to six common Ontario surface and binder layer of asphalt mixes. The intent was to determine if RAS could be added to improve performance and provide longer term cost savings. Laboratory testing was performed to evaluate the mix behavior. The elastic properties, fatigue life and resistance to thermal cracking were all evaluated at the CPATT laboratory. The characteristics of the mixes were evaluated by carrying out Dynamic Modulus, Resilient Modulus, Flexural Fatigue and Thermal Stress Restrained Specimen Test (TSRST) tests following American Association of State Highway and Transportation Officials (AASHTO) and American Society for Testing and Materials (ASTM) standards. Field test sections were constructed from HMA containing RAS to monitor the pavement behavior under natural environmental and traffic loading conditions. Evaluation of the field sites was performed using a Portable Falling Weight Deflectometer (PFWD) and carrying out distress surveys following the Ministry of Transportation Ontario (MTO) guidelines. The results to date show the sections performing very well with minimal to no distress developing. The results of the laboratory testing and field performance evaluations have shown encouraging results for the future use of RAS in HMA. If RAS can properly be engineered into HMA it can be a useful additive in both the surface and binder layers of the flexible pavement structure. Ultimately, the use of RAS in HMA can provide both an environmentally friendly and cost effective solution to the Ontario paving industry.

Warm mix asphalt (WMA) technology has now been successfully used in Ontario for a few years. This shift in usage relates to extensions in construction season, reduced emissions, larger compaction windows, and potential fuel savings. This research between Miller Paving Ltd. and the Centre for Pavement and Transportation Technology attempts to better quantify the difference in hot mix asphalt (HMA) and WMA. The object of this study was three-fold. The first part of the research was to examine the strength characteristics of HMA and WMA as a function of storage time. The purpose of this evaluation was to quantify indirect tensile strength (ITS) and moisture susceptibility of HMA and WMA over time. The second objective involved evaluating the performance characteristics of HMA and WMA. Resilient modulus and dynamic modulus testing were completed on plant-produced HMA and WMA material, which was used to determine long-term performance properties of both mixes. The third and final objective of this study was an economic analysis performed to determine the difference in cost for construction and maintenance for the HMA and WMA pavements. This was completed to determine if the cost of the warm mix technology used in the production of the WMA was offset by fuel savings at the plant. The findings of the research included: • HMA and WMA had statistically equivalent air voids over a four-week storage period. • Dry and wet ITS results for the WMA increased over a four-week storage period while the HMA specimens did not show this same increase. • WMA material had slightly better workability than the HMA material although the values were statistically equivalent. • WMA mix had higher resilient modulus values than the HMA mix. • Dynamic modulus testing showed that at high temperatures, WMA showed to be slightly more susceptible to rutting than the HMA mix, and at lower temperatures, the HMA showed to be slightly more susceptible to fatigue cracking than the WMA mix. • The MEPDG showed that both the HMA and WMA pavements were deemed to be structurally adequate. • An economic analysis of the HMA and WMA pavements compared a life cycle cost analysis over a 20-year design life which included all costs associated with construction, maintenance, and rehabilitation of both the HMA and WMA and showed that the HMA was slightly more cost effective than the WMA. • A field trial was performed by Miller Paving Limited on Highway 62 in Madoc, Ontario showed that the WMA material was more effective at maintaining the temperature of the asphalt mixture during long hauling distances. • Overall the WMA exhibited the same performance properties as the HMA.

The underlying purpose of any pavement is to provide a safe, smooth and reliable surface for the intended users. In the case of hot mix asphalt (HMA) pavements, this includes producing a surface that is resistant to the principal HMA distress types: permanent deformation (or rutting) and fatigue damage (or cracking). To protect better against these distress types, there have recently been changes in HMA mixture design practice. These changes have had the positive effect of producing more damage resistant mixtures but have also had the effect of producing mixtures that require more compaction effort to obtain required densities. It is important to understand what properties of an HMA mixture contribute to their compactability. This study presents analysis of the correlation between HMA mixture properties and laboratory compaction parameters for the purpose of predicting compactability. Mixture property data were measured for a variety of mixtures; these mixtures were compacted in the laboratory and compaction parameters were collected. A statistical analysis was implemented to correlate the mixture data to the compaction data for the purpose of predicting compactability. The resulting model performs well at predicting compactability for mixtures that are similar to the ones used to make the model, and it reveals some mixture properties that influence compaction. The analysis showed that the binder content in an HMA mixture and the slope of the aggregate gradation curve are important in determining the compactability of a mixture.

M. Tech. Civil Engineering. / Aims to assess the influence of the type of binder on the evolution of the macro texture in asphalt at an early age. The objective are to : 1. To assess the approach and methodology of French asphalt design method. 2. To establish the contributors to the reduction of skid resistance of asphalt. 3. Identify effective methods and develop guidelines for improving the surface drainage of asphalt with the use of tests from the laboratory. Asphaltic materials and factors under investigation include: pervious asphalt, continuously grade asphalt and various asphalt surface characteristics and correlation with the Tri-dim laser.

The ability of an asphalt mix to heal is an important property that influences the overall fatigue performance of the mix in the field. Micro damage healing in an asphalt mix is a function of several factors such as the physical and chemical properties of the binder, properties of the mixture, level of damage prior to the rest period during which healing occurs, duration of the rest period, temperature, and pressure. This thesis presents details from a two-part study that addresses the following aspects. In the first part of this study, a DSR based test method was developed to measure inherent healing in asphalt binder and a modified form of the Avrami equation was used to model it. In the second part of this study, an experimental and analytical method based on viscoelastic continuum damage theory was developed to characterize the healing in an asphalt composite (fine aggregate matrix) as a function of the level of damage prior to the rest period and the duration of the rest period. The intrinsic healing of three different asphalt binders was measured at three different temperatures and two aging conditions and it was further demonstrated to be the sum of two components: instantaneous strength gain immediately upon wetting and time dependent strength gain. The intrinsic healing results obtained from the DSR tests were demonstrated to be in agreement with the hypothesis that time dependent intrinsic healing increases with an increase in temperature and decreases with aging of the asphalt binder. The overall healing was measured in four different fine aggregate matrix (FAM) asphalt mixes and various tests were performed to quantify overall healing at isothermal and short term aged test conditions. Additionally two different verification tests were also conducted to demonstrate that the percentage healing measured using the proposed method are independent of the sequence of loading or rest periods. Finally, the overall healing results were demonstrated to support the hypothesis that the healing characteristics determined using the proposed test method can be treated as a characteristic material property. / text