Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 1981. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND AERO. / Includes bibliographical references. / by Alison Kay Brown. / M.S.

There are two traditional aircraft categories: fixed-wing which have a long endurance and a high cruise airspeed and rotorcraft which can take-off and land vertically. The tailsitter is a type of aircraft that has the strengths of both platforms, with no additional mechanical complexity, because it takes off and lands vertically on its tail and can transition the entire aircraft horizontally into high-speed flight. In this dissertation, we develop the entire control system for a tailsitter with a ducted fan. The standard method to compute the quaternion-based attitude error does not generate ideal trajectories for a hovering tailsitter for some situations. In addition, the only approach in the literature to mitigate this breaks down for large attitude errors. We develop an alternative quaternion-based error method which generates better trajectories than the standard approach and can handle large errors. We also derive a hybrid backstepping controller with almost global asymptotic stability based on this error method. Many common altitude and airspeed control schemes for a fixed-wing airplane assume that the altitude and airspeed dynamics are decoupled which leads to errors. The Total Energy Control System (TECS) is an approach that controls the altitude and airspeed by manipulating the total energy rate and energy distribution rate, of the aircraft, in a manner which accounts for the dynamic coupling. In this dissertation, a nonlinear controller, which can handle inaccurate thrust and drag models, based on the TECS principles is derived. Simulation results show that the nonlinear controller has better performance than the standard PI TECS control schemes. Most constant altitude transitions are accomplished by generating an optimal trajectory, and potentially actuator inputs, based on a high fidelity model of the aircraft. While there are several approaches to mitigate the effects of modeling errors, these do not fully remove the accurate model requirement. In this dissertation, we develop two different approaches that can achieve near constant altitude transitions for some types of aircraft. The first method, based on multiple LQR controllers, requires a high fidelity model of the aircraft. However, the second method, based on the energy along the body axes, requires almost no aerodynamic information.

This dissertation addresses rigid body attitude control with piecewise sinusoidal signals. We consider rigid-body attitude kinematics on SO(3) with a class of sinusoidal inputs. We present a new closed-form solution of the rotation matrix kinematics. The solution is analyzed and used to prove controllability. We then present kinematic-level orientation-feedback controllers for setpoint tracking and command following. Next, we extend the sinusoidal kinematic-level control to the dynamic level. As a representative dynamic system, we consider a CubeSat with vibrating momentum actuators that are driven by small $\epsilon$-amplitude piecewise sinusoidal internal torques. The CubeSat kinetics are derived using Newton-Euler's equations of motion. We assume there is no external forcing and the system conserves zero angular momentum. A second-order approximation of the CubeSat rotational motion on SO(3) is derived and used to derive a setpoint tracking controller that yields order O(ε2) closed-loop error. Numerical simulations are presented to demonstrate the performance of the controls. We also examine the effect of the external damping on the CubeSat kinetics. In addition, we investigate the feasibility of the piecewise sinusoidal control techniques using an experimental CubeSat system. We present the design of the CubeSat mechanical system, the control system hardware, and the attitude control software. Then, we present and discuss the experiment results of yaw motion control. Furthermore, we experimentally validate the analysis of the external damping effect on the CubeSat kinetics.

Small satellites are becoming increasingly important to the aerospace industry mainly due to their significantly reduced development and launch cost as well as shorter development time frames. In order to meet the requirements imposed by critically limited resources of very small satellites, e.g. picosatellites, innovative approaches have to be taken in the design of effective subsystem technologies. This thesis presents the design of an active attitude determination and control system for flight testing on-board the picosatellite 'Compass-1' of the University of Applied Sciences Aachen, Germany. The spacecraft of the CubeSat class with a net spacecraft mass of only 1kg uses magnetic coils as the only means of actuation in order to satisfy operational requirements imposed by its imagery payload placed on a circular and polar Low Earth Orbit. The control system is capable of autonomously dissipating the tumbling rates of the spacecraft after launch interface separ ation and aligning the boresight of the payload into the desired nadir direction within a pointing error of approximately 10°. This nadir-pointing control is achieved by a full-state feedback Linear Quadratic Regulator which drives the attitude quaternion and their respective rates of change into the desired reference. The state of the spacecraft is determined by a static statistical QUEST attitude estimator processing readings of a three-axis magnetometer and a set of five sun sensors. Linear Floquet theory is applied to quantify the stability of the controller and a non-linear dynamics simulation is used to confirm that the attitude asymptotically converges to the reference in the absence of environmental disturbances. In the presence of disturbances the system under control suffers from fundamental underactuaction typical for purely magnetic attitude control but maintains satisfactory alignment accuracies within operational boundaries.

<p>This report handles the preliminary design of a control system that includes both attitude control and boost control functionality for sounding rockets. This is done to reduce the weight and volume for the control system. </p><p>A sounding rocket is a small rocket compared to a satellite launcher. It is used to launch payloads into suborbital trajectories. The payload consists of scientific experiments, for example micro-gravity experiments and astronomic observations. The boost guidance system controls the sounding rocket during the launch phase. This is done to minimize the impact dispersion. The attitude control system controls the payload during the experiment phase. </p><p>The system that is developed in this report is based on the DS19 boost guidance system from Saab Ericsson Space AB. The new system is designed by extending DS19 with software and hardware. The new system is therefore named DS19+. Hardware wise a study of the mechanical and electrical interfaces and also of the system budgets for gas, mass and power for the system are done to determine the feasibility for the combined system. </p><p>Further a preliminary design of the control software is done. The design has been implemented as pseudo code in MATLAB for testing and simulations. A simulation model for the sounding rocket andits surroundings during the experiment phase has also been designed and implemented in MATLAB. The tests and simulations that have been performed show that the code is suitable for implementation in the real system.</p>

The present dissertation studies specific issues related to the coordination of a set of "agents" evolving on a nonlinear manifold, more particularly a homogeneous manifold or a Lie group. The viewpoint is somewhere between control algorithm design and system analysis, as algorithms are derived from simple principles --- often retrieving existing models --- to highlight specific behaviors. With a fair amount of approximation, the objective of the dissertation can be summarized by the following question: Given a swarm of identical agents evolving on a nonlinear, nonconvex configuration space with high symmetry, how can you define specific collective behavior, and how can you design individual agent control laws to get a collective behavior, without introducing hierarchy nor external reference points that would break the symmetry of the configuration space? Maintaining the basic symmetries of the coordination problem lies at the heart of the contributions. The main focus is on the global geometric invariance of the configuration space. This contrasts with most existing work on coordination, where either the agents evolve on vector spaces --- which, to some extent, can cover local behavior on manifolds --- or coordination is coupled to external reference tracking such that the reference can serve as a beacon around which the geometry is distorted towards vector space-like properties. A second, more standard symmetry is to treat all agents identically. Another basic ingredient of the coordination problem that has important implications in this dissertation is the reduced agent interconnectivity: each agent only gets information from a limited set of other agents, which can be varying. In order to focus on issues related to geometry / symmetry and reduced interconnectivity, individual agent dynamics are drastically simplified to simple integrators. This is justified at a "planning" level. Making the step towards realistic dynamics is illustrated for the specific case of rigid body attitude synchronization. The main contributions of this dissertation are * I. an extensive study of synchronization on the circle, (a) highlighting difficulties encountered for coordination and (b) proposing simple strategies to overcome these difficulties; * II. (a) a geometric definition and related control law for "consensus" configurations on compact homogeneous manifolds, of which synchronization --- all agents at the same point --- is a special case, and (b) control laws to (almost) globally reach synchronization and "balancing", its opposite, under general interconnectivity conditions; * III. several propositions for rigid body attitude synchronization under mechanical dynamics; * IV. a geometric framework for "coordinated motion" on Lie groups, (a) giving a geometric definition of coordinated motion and investigating its implications, and (b) providing systematic methods to design control laws for coordinated motion. Examples treated for illustration of the theoretical concepts are the circle S^1 (sometimes the sphere S^n), the rotation group SO(n), the rigid-body motion groups SE(2) and SE(3) and the Grassmann manifolds Grass(p,n). The developments in this dissertation remain at a rather theoretical level; potential applications are briefly discussed.

This thesis is concerned with input-output stability theory. Within this framework, it is of interest how inputs map to outputs through an operator that represents a system to be controlled or the controller itself. The Small Gain, Passivity, and Conic Sector Stability Theorems can be used to assess the stability of a negative feedback interconnection involving two systems that each have specific input-output properties. Our first contribution concerns characterization of the input-output properties of linear time-varying (LTV) systems. We present various theorems that ensure that a LTV system has finite gain, is passive, or is conic. We also consider the stability of various negative feedback interconnections. Motivated by the robust nature of passivity-based control, we consider how to overcome passivity violations. This investigation leads to the hybrid conic systems framework whereby systems are described in terms of multiple conic bounds over different operating ranges. A special case relevant to systems that experience a passivity violation is the hybrid passive/finite gain framework. Sufficient conditions are derived that ensure the negative feedback interconnection of two hybrid conic systems is stable. The input-output properties of gain-scheduled systems are also investigated. We show that a gain-scheduled system composed of conic subsystems has conic bounds as well. Using the conic bounds of the subsystems along with the scheduling signal properties, the overall conic bounds of the gain-scheduled system can be calculated. We also show that when hybrid very strictly passive/finite gain (VSP/finite gain) subsystems are gain-scheduled, the overall map is also hybrid VSP/finite gain. Being concerned with the control of aerospace systems, we use the theory developed in this thesis to control two interesting plants. We consider passivity-based control of a spacecraft endowed with magnetic torque rods and reaction wheels. In particular, we synthesize a LTV input strictly passive controller. Using hybrid theory we control single- and two-link flexible manipulators. We present two controller synthesis schemes, each of which employs numerical optimization techniques and attempts to have the hybrid VSP/finite gain controllers mimic a H2 controller. One of our synthesis methods uses the Generalized Kalman-Yakubovich-Popov Lemma, thus realizing a convex optimization problem.

This thesis is concerned with input-output stability theory. Within this framework, it is of interest how inputs map to outputs through an operator that represents a system to be controlled or the controller itself. The Small Gain, Passivity, and Conic Sector Stability Theorems can be used to assess the stability of a negative feedback interconnection involving two systems that each have specific input-output properties. Our first contribution concerns characterization of the input-output properties of linear time-varying (LTV) systems. We present various theorems that ensure that a LTV system has finite gain, is passive, or is conic. We also consider the stability of various negative feedback interconnections. Motivated by the robust nature of passivity-based control, we consider how to overcome passivity violations. This investigation leads to the hybrid conic systems framework whereby systems are described in terms of multiple conic bounds over different operating ranges. A special case relevant to systems that experience a passivity violation is the hybrid passive/finite gain framework. Sufficient conditions are derived that ensure the negative feedback interconnection of two hybrid conic systems is stable. The input-output properties of gain-scheduled systems are also investigated. We show that a gain-scheduled system composed of conic subsystems has conic bounds as well. Using the conic bounds of the subsystems along with the scheduling signal properties, the overall conic bounds of the gain-scheduled system can be calculated. We also show that when hybrid very strictly passive/finite gain (VSP/finite gain) subsystems are gain-scheduled, the overall map is also hybrid VSP/finite gain. Being concerned with the control of aerospace systems, we use the theory developed in this thesis to control two interesting plants. We consider passivity-based control of a spacecraft endowed with magnetic torque rods and reaction wheels. In particular, we synthesize a LTV input strictly passive controller. Using hybrid theory we control single- and two-link flexible manipulators. We present two controller synthesis schemes, each of which employs numerical optimization techniques and attempts to have the hybrid VSP/finite gain controllers mimic a H2 controller. One of our synthesis methods uses the Generalized Kalman-Yakubovich-Popov Lemma, thus realizing a convex optimization problem.

This report handles the preliminary design of a control system that includes both attitude control and boost control functionality for sounding rockets. This is done to reduce the weight and volume for the control system. A sounding rocket is a small rocket compared to a satellite launcher. It is used to launch payloads into suborbital trajectories. The payload consists of scientific experiments, for example micro-gravity experiments and astronomic observations. The boost guidance system controls the sounding rocket during the launch phase. This is done to minimize the impact dispersion. The attitude control system controls the payload during the experiment phase. The system that is developed in this report is based on the DS19 boost guidance system from Saab Ericsson Space AB. The new system is designed by extending DS19 with software and hardware. The new system is therefore named DS19+. Hardware wise a study of the mechanical and electrical interfaces and also of the system budgets for gas, mass and power for the system are done to determine the feasibility for the combined system. Further a preliminary design of the control software is done. The design has been implemented as pseudo code in MATLAB for testing and simulations. A simulation model for the sounding rocket andits surroundings during the experiment phase has also been designed and implemented in MATLAB. The tests and simulations that have been performed show that the code is suitable for implementation in the real system.

In this thesis, attitude control of small satellites with dissimilar actuator is studied and the effects of control allocation methods on maneuvering are examined in detail. Magnetorquers and reaction wheels are considered as the actuators of a modeled remote sensing -nadir pointing- small satellite. Matlab&reg / Simulink simulation models are developed to model the satellite dynamics and the actuators on the satellite. The simulations are based on conceptual RASAT satellite, and, for verification, orbit data is taken from BILSAT satellite that is operated by TUBITAK Space Research Institute. Basic satellite control modes are developed and tested to obtain nominal control. Actuator failures are analyzed for different possible cases. A control allocation method called Blended Inverse that was originally proposed for steering CMGs is applied to select the actuators to avoid actuator saturation and singularity transition. The performance of traditional pseudo inverse method is compared with the blended inverse method and simulation results are given and discussed. The superiority of blended inverse over pseudo inverse is demonstrated.