This study uses numerical design optimization with advanced metamodeling techniques to investigate the effects of material substitution and dummy models on crashworthiness characteristics of automotive structures. A full-scale Dodge Neon LS-DYNA finite element model is used in all structural analysis and optimization calculations. Optimization is performed using vehicle-based responses for multiple crash scenarios and occupant-based responses for one crash scenario. An AZ31 magnesium alloy is substituted for the baseline steel in twenty-two vehicle parts. Five base metamodels and an Optimized Ensemble metamodel are used to develop global surrogate models of crash-induced responses. Magnesium alloy is found to maintain or improve vehicle crashworthiness with an approximate 50% reduction in selected part mass using vehicle-based responses while dummy-based designs show less percentage decrease in weight. Vehicle-based responses selected to approximate dummy injury metrics do not show the same relative change compared to dummy-based responses.

Automotive companies are exposed to tough competition and therefore strive to design better products in a cheaper and faster manner. This challenge requires continuous improvements of methods and tools, and simulation models are therefore used to evaluate every possible aspect of the product. Optimization has become increasingly popular, but its full potential is not yet utilized. The increased demand for accurate simulation results has led to detailed simulation models that often are computationally expensive to evaluate. Metamodel-based design optimization (MBDO) is an attractive approach to relieve the computational burden during optimization studies. Metamodels are approximations of the detailed simulation models that take little time to evaluate and they are therefore especially attractive when many evaluations are needed, as e.g. in multidisciplinary design optimization (MDO). In this thesis, state-of-the-art methods for metamodel-based design optimization are covered and different multidisciplinary design optimization methods are presented. An efficient MDO process for large-scale automotive structural applications is developed where aspects related to its implementation is considered. The process is described and demonstrated in a simple application example. It is found that the process is efficient, flexible, and suitable for common structural MDO applications within the automotive industry. Furthermore, it fits easily into an existing organization and product development process and improved designs can be obtained even when using metamodels with limited accuracy. It is therefore concluded that by incorporating the described metamodel-based MDO process into the product development, there is a potential for designing better products in a shorter time.

In the early design stage of automotive joints, fuzziness is omnipresent because designers reason in non quantitative terms and deal with imprecise data. Consequently, they need a design methodology that accounts for vagueness. Fuzzy sets and utility theory are appropriate tools because they link the vagueness in a problem formulation and the precise nature of mathematical models. Fuzzy multiobjective optimizations are performed on an automotive joint to maximize the overall designer's satisfaction. Several methods that account for all the attributes and the fuzziness in the goals are used. Three multiobjective fuzzy approaches, namely, the conservative, the aggressive and the moderate methods are investigated. Utility theory is also considered to optimize the joint. One of the performance attributes of the joint, the stiffness, is evaluated rapidly using approximate tools (neural networks and response surface polynomials) to overcome the high computational cost of PEA, which is traditionally used to calculate the stiffness. This research compares fuzzy set methods and utility theory in design of automotive components. These methods are applied on two examples where the same B-pillar to rocker joint of an actual car is optimized. Fuzzy set based methods and utility theory appear to be suitable for optimizing automotive joints because they allow for trading conflicting objectives. Fuzzy set based methods avoid trading objectives to the point of having a level of satisfaction equal to zero. When using the fuzzy set based methods investigated in this research, the trade-offs among the attributes are not explicitly defined by the user. Utility theory requires the user to quantify precisely the trade-offs among the attributes. When using utility theory, the overall satisfaction of a design can be non zero even if one or more attributes has a level of satisfaction equal to zero. The approximate tools enable us to perform the optimization efficiently by reducing considerably the computational cost. / Master of Science

Multidisciplinary design optimization (MDO) can be used as an effective tool to improve the design of automotive structures. Large-scale MDO problems typically involve several groups who must work concurrently and autonomously for reasons of efficiency. When performing MDO, a large number of designs need to be rated. Detailed simulation models used to assess automotive design proposals are often computationally expensive to evaluate. A useful MDO process must distribute work to the groups involved and be computationally efficient. In this thesis, MDO methods are assessed in relation to the characteristics of automotive structural applications. Single-level optimization methods have a single optimizer, while multi-level optimization methods have a distributed optimization process. Collaborative optimization and analytical target cascading are possible choices of multi-level optimization methods for automotive structures. They distribute the design process, but are complex. One approach to handle the computationally demanding simulation models involves metamodel-based design optimization (MBDO), where metamodels are used as approximations of the detailed models during optimization studies. Metamodels can be created by individual groups prior to the optimization process, and therefore also offer a way of distributing work. A single-level optimization method in combination with metamodels is concluded to be the most straightforward way of implementing MDO into the development of automotive structures.

Multi-material-design (MMD) is commonly realized through the combination of thin sheet metal and fibre reinforced plastics (FRP). To maximize the high lightweight potential of the material groups within a multi-material system as good as possible, a material-adapted and particularly fibre adjusted joining technology must be applied. The present paper focuses on two novel joining technologies, the Flow Drill Joining (FDJ) method and Spin-Blind-Riveting (SBR), which were developed for joining heavy-duty metal/composite hybrids. Tests were carried out with material combinations which are significant for lightweight constructions such as aluminium (AA5083) and carbon fibre-reinforced polyamide in sheet thickness of 1.8 mm. The mechanical testing and manufacturing of those multi-material joints was investigated.

Multi-material-design (MMD) is commonly realized through the combination of thin sheet metal and fibre reinforced plastics (FRP). To maximize the high lightweight potential of the material groups within a multi-material system as good as possible, a material-adapted and particularly fibre adjusted joining technology must be applied. The present paper focuses on two novel joining technologies, the Flow Drill Joining (FDJ) method and Spin-Blind-Riveting (SBR), which were developed for joining heavy-duty metal/composite hybrids. Tests were carried out with material combinations which are significant for lightweight constructions such as aluminium (AA5083) and carbon fibre-reinforced polyamide in sheet thickness of 1.8 mm. The mechanical testing and manufacturing of those multi-material joints was investigated.