Global ETD Search

1	Management model to optimise the use of reverse osmosis brine to backwash ultra-filtration systems at Medupi power station / Frederik Jacobus Fourie Fourie, Frederik Jacobus January 2014 (has links) According to the Department of Water Affairs (DWAF, 2004 p.15), South Africa’s water resources are scarce and extremely limited and much of this precious resource is utilised and consumed in our industries. Treatment and re-use of effluent generated is, in some cases, preferred over use of alternate water resources (Du Plessis, 2008 p.3). The volume of effluent generated in treatment processes like ultra-filtration (UF) and reverse osmosis (RO) units is determined by the feed water quality, with high water loss through effluent generation at poor feed water quality. Current UF and RO applications require an increased UF production capacity due to the use of UF filtrate for periodic backwashing of the UF membrane units. This results in loss of water and decreases overall recovery. The need therefore exists to increase the overall recovery of product water from the raw water stream by reducing the amount of effluent generated. This would be possible to achieve by using RO brine to backwash the UF unit. The study was conducted to provide a modelling tool, assisting management to optimise the use of RO brine as backwash water on the UF system at the Medupi power station. The secondary objective of this study was the development of a modelling tool that can be used for other projects, new or existing, as a measure and indication of the usability of RO brine as backwash water on UF systems. By successfully applying this newly developed model, the viability of utilising the RO brine as backwash water for the UF was investigated. This modification would lead to utilizing smaller UF units than previously envisioned, which in turn leads to reducing capital cost with 11.07% and operating expenditure with 9.98% at the Medupi power station. This also has a positive environmental impact by reducing the amount of raw water used monthly by 10.34% (108 000 m3/month). / MIng (Development and Management Engineering), North-West University, Potchefstroom Campus, 2014 Ultra-filtration (UF) Reverse osmosis (RO) Membranes Backwashing RO brine Modelling tool Medupi power station
2	Management model to optimise the use of reverse osmosis brine to backwash ultra-filtration systems at Medupi power station / Frederik Jacobus Fourie Fourie, Frederik Jacobus January 2014 (has links) According to the Department of Water Affairs (DWAF, 2004 p.15), South Africa’s water resources are scarce and extremely limited and much of this precious resource is utilised and consumed in our industries. Treatment and re-use of effluent generated is, in some cases, preferred over use of alternate water resources (Du Plessis, 2008 p.3). The volume of effluent generated in treatment processes like ultra-filtration (UF) and reverse osmosis (RO) units is determined by the feed water quality, with high water loss through effluent generation at poor feed water quality. Current UF and RO applications require an increased UF production capacity due to the use of UF filtrate for periodic backwashing of the UF membrane units. This results in loss of water and decreases overall recovery. The need therefore exists to increase the overall recovery of product water from the raw water stream by reducing the amount of effluent generated. This would be possible to achieve by using RO brine to backwash the UF unit. The study was conducted to provide a modelling tool, assisting management to optimise the use of RO brine as backwash water on the UF system at the Medupi power station. The secondary objective of this study was the development of a modelling tool that can be used for other projects, new or existing, as a measure and indication of the usability of RO brine as backwash water on UF systems. By successfully applying this newly developed model, the viability of utilising the RO brine as backwash water for the UF was investigated. This modification would lead to utilizing smaller UF units than previously envisioned, which in turn leads to reducing capital cost with 11.07% and operating expenditure with 9.98% at the Medupi power station. This also has a positive environmental impact by reducing the amount of raw water used monthly by 10.34% (108 000 m3/month). / MIng (Development and Management Engineering), North-West University, Potchefstroom Campus, 2014 Ultra-filtration (UF) Reverse osmosis (RO) Membranes Backwashing RO brine Modelling tool Medupi power station
3	Evaluation of Different Forward Osmosis Membrane Cleaning Strategies for Produced Water Streams Treatment Alamoudi, Talal 07 1900 (has links) Forward osmosis (FO) as a novel membrane separation technology has recently been investigated in various water treatment applications. The natural mass transfer process between two solutions driven by the osmotic pressure difference leads to many operational advantages in the FO process, such as low energy consumption and minimal fouling problems. It makes FO a feasible technology for the treatment of produced water (PW). Although previously, the treatment of PW using FO has been investigated, osmotic backwashing (OB) is not systematically examined for water flux recovery of the PW fouled FO membranes. Moreover, the cleaning of FO membranes used for the simultaneous treatment of different PW streams was never previously attempted. In this study, OB was thoroughly investigated for the cleaning of PW-fouled FO membranes. Also, FO membrane chemical cleaning using SDS and NaOH solutions was examined too. To investigate OB, the cleaning efficiency of a 60 min OB cleaning protocol was examined under different FO operating modes in (5 x 20 h) experiments using synthetic desalter effluent as FO feed solution (FS) and 1.2 M NaCl solution or water-oil separator outlet (WO) as draw solutions (DS). The AL-FS (active layer facing FS) mode outcompeted the AL-DS (active layer facing DS) mode, achieving a flux of 12.9 LMH and 80.1% water reclamation when using WO as a DS. Therefore, this FO configuration 5 was selected when evaluating the cleaning protocols. Moreover, after evaluating different OB methods, the 30 min OB protocol achieved the highest system efficiency rate of 95% and was studied for the treatment of real PW streams. The SDS and NaOH chemical cleaning methods achieved flux recovery rates of 99% and 98% by the end of the third treatment cycle, respectively, outperforming the 89% flux recovery rate of the optimized OB protocol. Although the investigated cleaning methods were able to restore the system performance, a substantial increase in RSF was observed due to mainly irreversible colloidal fouling. This study demonstrates the feasibility of OB and chemical cleaning in restoring FO system performance for the simultaneous treatment of PW streams forward osmosis produced water treatment membrane cleaning osmotic backwashing checmical cleaning
4	Optimalizace využití vratné vody na úpravně vody / Optimizing the use of sludge water on the water treatment plant Hanušová, Veronika January 2018 (has links) The first part of this diploma thesis deals with knowledge of chosen technological devices in water treatment plants gathered from Czech and foreign literature. The thesis continues by linking the information gathered to the water treatment plant in Švařec for which a plan to increase the sludge water volume reuse was researched and formed. Furthermore, financial assessment of this plan was completed.
5	Pilot-scale Development of Trickle Bed Air Biofiltration Employing Deep Biofilms, for the Purification of Air Polluted with Biodegradable VOCs Smith, Francis Lee January 1999 (has links) No description available. Biofilter biofiltration toluene deep biofilm VOC Monod kinetics equation lumped parameter design model TBAB trickle trickle bed trickling trickling bed celite R-635 backwash backwashing electrolytic respirometry Henry's law
6	Development of High-throughput Membrane Filtration Techniques for Biological and Environmental Applications / Development of High-throughput Membrane Filtration Techniques Kazemi, Amir Sadegh 11 1900 (has links) Membrane filtration processes are widely utilized across different industrial sectors for biological and environmental separations. Examples of the former are sterile filtration and protein fractionation via microfiltration (MF) and ultrafiltration (UF) while drinking water treatment, tertiary treatment of wastewater, water reuse and desalination via MF, UF, nanofiltration (NF) and reverse-osmosis (RO) are examples of the latter. A common misconception is that the performance of membrane separation is solely dependent on the membrane pore size, whereas a multitude of parameters including solution conditions, solute concentration, presence of specific ions, hydrodynamic conditions, membrane structure and surface properties can significantly influence the separation performance and the membrane’s fouling propensity. The conventional approach for studying filtration performance is to use a single lab- or pilot-scale module and perform numerous experiments in a sequential manner which is both time-consuming and requires large amounts of material. Alternatively, high-throughput (HT) techniques, defined as the miniaturized version of conventional unit operations which allow for multiple experiments to be run in parallel and require a small amount of sample, can be employed. There is a growing interest in the use of HT techniques to speed up the testing and optimization of membrane-based separations. In this work, different HT screening approaches are developed and utilized for the evaluation and optimization of filtration performance using flat-sheet and hollow-fiber (HF) membranes used in biological and environmental separations. The effects of various process factors were evaluated on the separation of different biomolecules by combining a HT filtration method using flat-sheet UF membranes and design-of-experiments methods. Additionally, a novel HT platform was introduced for multi-modal (constant transmembrane pressure vs. constant flux) testing of flat-sheet membranes used in bio-separations. Furthermore, the first-ever HT modules for parallel testing of HF membranes were developed for rapid fouling tests as well as extended filtration evaluation experiments. The usefulness of the modules was demonstrated by evaluating the filtration performance of different foulants under various operating conditions as well as running surface modification experiments. The techniques described herein can be employed for rapid determination of the optimal combination of conditions that result in the best filtration performance for different membrane separation applications and thus eliminate the need to perform numerous conventional lab-scale tests. Overall, more than 250 filtration tests and 350 hydraulic permeability measurements were performed and analyzed using the HT platforms developed in this thesis. / Thesis / Doctor of Philosophy (PhD) / Membrane filtration is widely used as a key separation process in different industries. For example, microfiltration (MF) and ultrafiltration (UF) are used for sterilization and purification of bio-products. Furthermore, MF, UF and reverse-osmosis (RO) are used for drinking water and wastewater treatment. A common misconception is that membrane filtration is a process solely based on the pore size of the membrane whereas numerous factors can significantly affect the performance. Conventionally, a large number of lab- or full-scale experiments are performed to find the optimum operating conditions for each filtration process. High-throughput (HT) techniques are powerful methods to accelerate the pace of process optimization—they allow for multiple experiments to be run in parallel and require smaller amounts of sample. This thesis focuses on the development of different HT techniques that require a minimal amount of sample for parallel testing and optimization of membrane filtration processes with applications in environmental and biological separations. The introduced techniques can reduce the amount of sample used in each test between 10-50 times and accelerate process development and optimization by running parallel tests. Membrane filtration Ultrafiltration Downstream bio-processing High-throughput (HT) testing Wastewater treatment Hollow-fiber membranes Humic acids High-throughput filtration Design-of-experiments (DOE) Process optimization Microscale filtration Microfluidic flow control system Stirred well filtration SWF High-throughput hollow-fiber module HT-HF Constant TMP Constant flux Multi-modal filtration Bioseparation MMFC MS-PS-CFF PEG Dextran FITC-Dextran BSA DNA IgG α-lactalbumin Biomolecule separation Module hydrodynamics Concentration polarization Membrane fouling Micromixing Omega™ membrane Microscale processing Fouling test PVDF membrane Surface modification Polydopamine Membrane cleaning Membrane backwashing Sodium alginate Polyethersulfone PES Hydraulic permeability Membrane permeability ZeeWeed® membrane Filtration ionic strength Filtration pH Solution conditions Water treatment Environmental separations Biological separations

1

Page generated in 0.059 seconds