The aim of this thesis is to propose and evaluate static three-storey reinforced concrete structure. For static analysis supporting structure was used computer program based on FEM SCIA - Engineer 2013 - student version. In computing program have been two independent computational models and in 2D and 3D space. The results were compared and evaluated with each other. On the basis of the report is drafted drawings consisting of reinforcement drawing and drawing shape.

The thesis describes the analysis and design part of reinforced concrete frame structure. Calculation was made by program SCIA Engineer and verified by manual calculations using simplified methods. Static solution includes an assessment of floor slabs, columns and stairs. The output is then individual drawings of reinforcement. The thesis also includes a study determining the effective width for single rib.

The steel bandage is an economical and effective widely used method for strengthening RC columns. Diploma thesis reviews most common design proposals for the types of the bandage with directly loaded and not directly loaded steel angles. This work also includes a comparison of the different constitutive laws for confined concrete. In order to simulate real behaviour of strengthened structure the numerical analysis has been carried out using non-linear software ATENA. According to the European standards and adopted hypotheses the simplified analytical model has been derived to be able to calculate load-bearing capacity of a strengthened column under normal force and bending moment. The proposed model considers the contribution in confinement pressure caused by steel bandage and the contribution of directly loaded angles. In addition, the direct application on real frame structure has been performed.

Master´s thesis describes the design and static calculating of selected elements of prefabricated reinforced concrete hall with bulit-in office, elaboration of basic drawings of the project documentation, shape and reinforcemenet drawings of these selected structural prefabricated elements. The work also includes technical report, details of selected element´s contacts, drawing of plates and study of the behavior of reinforced buildings. Calculation was performed by using a computer program AxisVm, Microsoft Excel a IDEA StatiCa

This diploma thesis deals with the project of the structure of ferroconcrete multi-storey building. Selected parts for assessment are point-supported slab over the 1st floor, inside column, external and internal wall in the 1st floor. Finite Element Method in software Dlubal RFEM 5.23 was selected for the analysis. Another part of the thesis is the project of dimensions of foundations that are dealt with as deep foundations in accordance with engineering-geological survey.

Diploma thesis focuses on the design of selected parts of precast concrete frame construction. Elements for design are prestressed girder, purlin, column, footing pocket and drilled pile. The calculation of internal forces was performed in a computational program SCIA Engineer 18. Check of the pile was performed in program GEO 5. Part of the thesis is a technical report and formworks drawing and reinforcement drawing. The construction is designed and assessed according to ČSN EN 1992 - 1 - 1.

The final thesis is focused on designing reinforced concrete load-bearing structures of a detached house on two floors and one basement. In the basement will be located the storages, utility room and wine bar. On the ground floor will be located garage for two cars, living room with kitchen and study. On the second floor will be located bedroon and two child’s rooms. The ceiling slab of the second floor, the ceiling slab of the ground floor, the ceiling slab of the basement, spiral staircase, half-turn staircase and walls of the first underground floor with solution as water-resistant construction. Programs SCIA Engineer 21.1 and Dlubal RFEM are used to calculate the internal forces. To varify the accuracy of the results is used manual calculation. The work includes drawings of formwork and reinforcement of the all designing structires. The bulding is designed according to ČSN EN 1992-1-1.

This diploma thesis presents available FRP software for calculating load bearing capacity of the structures reinforced with FRP and compares them between each other. Furthermore theory and algorithm of my own software is presented here. Load bearing capacity of structures which are reinforced with non-metallic reinforcement and loaded by combination of normal force and bending moment can be solved by my programme. Effects of high temperatures on the concrete structures can be included in the calculation. In the second part of the thesis is calculated load-bearing capacity and deflection of the real beam reinforced with FRP reinforcement and load-bearing capacity of member with FRP reinforcement with effect of elevated temperature. This has been done using my software. Comparison of results from hand calculation and laboratory load-bearing testing is done at the end. This laboratory testing was accomplished by Institute of Concrete and Mansory Structures at our faculty.

As the main topic this thesis describes the design and evaluation of selected reinforced concrete members of the prefabricated reinforced concrete industrial building with administration at ultimate limit state in accordance with applicable standards. Movable overhead crane with carrying capacity of 50 tons is the main distinction of the industrial hall. Lateral frame whit main structural parts which are roof prestressed girder, load-bearing column supporting the overhead crane and drilled pile transferring loads from the upper construction to the load bearing subsoil, is designed in particular. Furthermore, design of the Gerber beam which forms the slab construction in the administrational part of the building is elaborated. Structural design and evaluation of other structures of the building is not part of this thesis.