The need for green and renewable fuels has led to the investigation of ways to exploit renewable resources. Solar among all the renewables is the most powerful and its conversion into usable energy would help in solving the energy problem our society is facing. Photocatalytic water splitting for hydrogen production is an example of solar energy storage into chemical bonds. The hydrogen produced in this way can then be employed as carbon free fuel creating the “Hydrogen Cycle”. This work investigates the structure and the activity of graphitic carbon nitride (g-C₃N₄), an organic semiconductor that proved a suitable photocatalyst for hydrogen production from water. Synthesised by thermal polycondensation of melamine it is a graphitic like material with a band gap of 2.7 eV which makes it a visible light active catalyst. In a first instance the effect of the synthesis conditions on its structure and morphology are investigated to find the optimum parameters. The temperature of condensation is varied from 450°C up to 650°C and the length from 2.5 h to 15 h. The structural changes are monitored via X-ray diffraction (XRD) and elemental analysis while the effect on the morphology and the band gap of g-C₃N₄ are investigated by mean of scanning electron microscopy and UV-Vis absorption. Subsequently, a study of the crystal structure of the catalyst is carried out. Using structures proposed in the literature, X-ray diffraction and neutron scattering simulations are used to narrow down the number of possible 3D structures. After structural characterisation, the activity of g-C₃N₄ for photocatalytic hydrogen evolution is evaluated. It is confirmed that loading 1 wt.% Pt on its surface significantly increases the hydrogen evolution rate. The attention then focuses on the loading procedures, the reduction pre treatments of the co-catalyst and the reasons of the different performances when different procedures are employed. The catalytic system is characterised by mean of X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and XRD. By investigating the composition and the morphology of the platinum nanoparticles under different conditions, the main factors responsible for the changes in activity of g-C₃N₄ for hydrogen evolution are identified. Additionally, the role of the co catalyst and its interaction with g-C₃N₄ is also elucidated. Finally, taking forward the knowledge acquired on the Pt-g-C₃N₄ system, the effect on the hydrogen evolution rate of alloying platinum with a second metal (Cu, Ag, Ni and Co) is studied. The nanoparticles are characterised by XRD and TEM. A screening of the loading procedures and bimetallic systems is performed to identify the most promising for photocatalytic hydrogen evolution with the aim of bringing them towards further investigation.

No description available.

L’émergence de nouveaux matériaux structurés à l’échelle nanométrique, aux propriétés contrôlées, a ouvert de nouvelles perspectives vis-à-vis des matériaux qui nous entourent. C’est notamment le cas des métaux et de leurs alliages et il est crucial d’établir le lien entre leurs propriétés structurales et leurs propriétés chimique et physique pour en permettre une utilisation optimale. Cette thèse s’inscrit dans ce contexte et porte sur la synthèse et la caractérisation en microscopie électronique en transmission de nanoparticules d’alliage bimétallique Au-Cu. En s’appuyant sur le diagramme de phase décrit à l’échelle macroscopique, nous nous sommes particulièrement intéressés aux nanoparticules de compositions nominales Au3Cu, AuCu et AuCu3. Le premier axe de ce travail consiste en l’élaboration de nanoparticules d’alliage Au-Cu. Deux voies de synthèse sont explorées : la voie chimique reposant sur le procédé polyol et la voie physique par ablation par laser pulsé. Le premier mode d’élaboration permet l’obtention de nanoparticules parfaitement cubiques dont la composition est systématiquement riche en Au. Les nanoparticules produites par voie physique présentent en revanche une composition maitrisée et modifiable. D’un point de vue structural, un recuit de ces dernières particules mène à leur mise en ordre chimique et à l’observation de structures L10 et L12. Cependant, nous montrons que cette transition de phase est bloquée dans les nanostructures présentant des défauts structuraux. Enfin, l’évolution du paramètre de maille des nanoparticules synthétisées selon ces deux voies de synthèse, en fonction de leur composition, a été établie et suit exactement la loi de Vegard décrite pour le matériau massif.Dans un second temps, nous avons observé des nanoparticules obtenues par voie physique en microscopie électronique en transmission environnementale, c’est-à-dire dans des conditions proches des environnements d’utilisation habituellement appliqués en catalyse. Les expériences menées en température révèlent que le mécanisme de dissolution de nanoparticules d’Au et d’alliage Au-Cu portées à haute température se fait en deux étapes : il y a fusion des nanoparticules suivi de leur évaporation pour des tailles de nanoparticules centrées autour de 10 nm. Les expériences réalisées en couplant le chauffage des nanoparticules au passage d’un gaz (H2 ou O2), en flux et dans des conditions de pression bien supérieures à celles accessibles jusqu’à maintenant, ont permis d’étudier leur comportement thermodynamique en condition oxydantes et réductrices. Nous avons notamment montré que des cycles d’oxydo-réduction de nanoparticules de taille moyenne supérieure à 20 nm conduisent à un effet Kirkendall menant, de manière réversible, à la formation de nanoparticules creuses (doughnut). Cette thèse interdisciplinaire constitue travail pionnier dans la compréhension du système d’alliage bimétallique Au-Cu à l’échelle nanoscopique / The emergence of new materials, structured at the nanoscale, with controlled properties, has opened new prospects regarding materials around us. In particular for metals and alloys, it seems crucial to connect their structural properties to their chemical and physical properties in order to optimise their use.Within this context, this thesis is focused on the synthesis and the characterisation of Au-Cu bimetallic alloy nanoparticles by transmission electron microscopy. On the basis of the bulk phase diagram, we especially studied particles with nominal compositions Au3Cu, AuCu et AuCu3.The first part of this work is dedicated to the synthesis of nanoparticles in two different ways. The chemical way is based on the polyol process and leads to nanoparticles exhibiting a cubic shape, and a systematically rich Au content. On the other hand, nanoparticles obtained by Pulsed Laser Deposition (PLD), a physical method of synthesis, display a well-controlled and tuneable composition. From a structural point of view, the annealing of the particles leads to chemical order and the stabilisation of L10 and L12 structures. However, we reveal that this phase transition is blocked in nanostructures with crystal defects. Moreover, we establish the evolution of the lattice parameter of the particles as a function of the composition and we demonstrate that, as in the bulk case, it is in agreement with Vegard’s law.In the second part, the nanoparticles synthesised via the physical method are studied using environmental transmission electron microscopy, i.e. in conditions close to those usually applied in catalytic reactors. Experiments performed at high temperature highlight that the dissolution of Au and Au-Cu nanoparticles occurs in a two-step process: fusion occurs first and is followed by evaporation for nanoparticles with a mean diameter of 10 nm.Coupling heating with gas flow (H2 or O2) in higher pressure condition than those usually reached allows us to study the thermodynamic behaviour of the nanoparticles in oxidative or reductive conditions. Most Notably, we show that oxidation-reduction cycles performed on nanoparticles with a diameter larger than 20 nm leads to a Kirkendall effect and the reversible formation of hollow particles (doughnuts).This cross-disciplinary thesis is a pioneering work towards understanding the bimetallic Au-Cu alloy system at atomic scale

Recently, the increasing level of atmospheric CO₂ has been widely noticed due to its association with global warming, provoking a growth in environmental concerns toward the continued use of fossil fuels. To mitigate the concentration of atmospheric CO₂, various strategies have been implemented. Among options to turn waste CO₂ into useful fuels and chemicals, carbon capture and utilisation along with renewable hydrogen production as the source materials for methanol production is more preferable. In the 1960s, the highly active and economic Cu/ZnO/Al₂O₃ catalyst was developed for CO₂ hydrogenation reaction to methanol, since then, metal nanoparticles and nanocomposites have been extensively investigated and applied. Especially, bimetallic catalysts have emerged as an important class of catalysts due to their unique properties and superior catalytic performances compared to their monometallic counterparts. This thesis presents the evolution of the catalyst development for CO₂ hydrogenation to methanol: Firstly, we introduced the CuZn-based catalysts with Zn content increased in the bimetallic CuZn system via a heterojunction synthesis approach. Secondly, we increased the active CuZn sites via introducing ultra-thin layered double hydroxide as the catalyst precursor for methanol production from CO₂ and H₂. Thirdly, a new class of Rh-In bimetallic catalysts were studied, which shows high methanol yield and selectivity under thermodynamically unfavourable methanol synthesis conditions owing to the strong synergies of Rh-In bimetallic system. Fourthly, for the renewable methanol production from H₂ and CO₂, the hydrogen source must come from the green production routes. Therefore, an in-depth study of a nanocomposite system, CdS-carbon nanotubes-MoS₂, for photocatalytic hydrogen production from water has been demonstrated. Finally, the conclusion of this thesis is given and an outlook is presented for the future development in this research area.

<p dir="ltr">Since its inception, the field of heterogeneous catalysis has evolved to address the needs of the ever-growing human population. Necessity, after all, fosters innovation. Today, the world faces numerous challenges related to anthropogenic climate change, and that has necessitated, among other things, a search for new catalysts that can enable renewable energy conversion and storage, sustainable food and chemicals production, and a reduction in carbon emissions. This search has led to the emergence of many promising classes of materials, each having a unique set of catalytic properties. Among such candidate materials, high-entropy alloys (HEAs) have very recently shown the potential to be a new catalyst design paradigm. HEAs are multimetallic, disordered alloys containing more than four elements and, as a result, possess a higher configurational entropy, which gives them considerable stability. They have many conceivable benefits over conventional bimetallic alloy catalysts—greater site heterogeneity, larger design space, and higher stability, among others­. Consequently, there is a need to explore their application in a wide range of thermal and electrocatalytic reaction systems so that their potential can be realized.</p><p dir="ltr">In the past few decades, first principles-based approaches involving Density Functional Theory (DFT) calculations have proven to be effective in probing catalytic mechanisms at the atomic scale. Fundamental insights from first principles studies have also led to a detailed understanding of reactivity and stability trends for bimetallic alloy catalysts. However, the express application of first principles approaches to study HEA catalysts remains a challenge, due to the large computational cost incurred in performing DFT calculations for disordered alloys, which can be represented by millions of different configurations. A combination of first principles approaches and computationally efficient machine learning (ML) approaches can, however, potentially overcome this limitation.</p><p dir="ltr">In this thesis, combined workflows involving first principles and machine learning-based approaches are developed. To map catalyst structure to properties graph convolutional network (GCN) models are developed and trained on DFT-predicted target properties such as formation energies, surface energies, and adsorption energies. Further, the Monte Carlo dropout method is integrated into GCN models to provide uncertainty quantification, and these models are in turn used in active learning workflows that involve iterative model retraining to both improve model predictions and optimize the target property value. Dimensionality reduction methods, such as principal components analysis (PCA) and Diffusion Maps (DMaps), are used to glean physicochemical insights from the parameterization of the GCN.</p><p dir="ltr">These workflows are applied to the analysis of binary, ternary, and quaternary alloy catalysts, and a series of fundamental insights regarding their stability are elucidated. In particular, the origin and stability of “Pt skins” that form on Pt-based bimetallic alloys such as Pt₃Ni in the context of the oxygen reduction reaction (ORR) are investigated using a rigorous surface thermodynamic framework. The active learning workflow enables the study of Pt skin formation on stepped facets of Pt₃Ni (with a complex, low-symmetry geometry), and this analysis reveals a hitherto undiscovered relationship between surface coordination and surface segregation. In another study, an active learning workflow is used to identify the most stable bulk composition in the Pd-Pt-Sn ternary alloy system using a combination of exhaustively sampled binary alloy data and prudently sampled ternary alloy data. Lastly, a new GCN model architecture, called SlabGCN, is introduced to predict the sulfur poisoning characteristics of quaternary alloy catalysts, and to find an optimal sulfur tolerant composition.</p><p dir="ltr">On another front, the electrocatalytic activity of quinary HEAs towards the ORR is investigated by performing DFT calculations on HEA structures generated using the High-Entropy Alloy Toolbox (HEAT), an in-house code developed for the high-throughput generation and analysis of disordered alloy structures with stability constraints (such as Pt skin formation). DFT-predicted adsorption energies of key ORR intermediates are further deconvoluted into ligand, strain, and surface relaxation effects, and the influence of the number of Pt skins on these effects is expounded. A Sabatier volcano analysis is performed to calculate the ORR activities of selected HEA compositions, and correspondence between theoretical predictions and experimental results is established, to pave the way for rational design of HEA catalysts for oxygen reduction.</p><p dir="ltr">In summary, this thesis examines stability and reactivity trends of a multitude of alloy catalysts, from conventional bimetallic alloys to high-entropy alloys, using a combination of first principles approaches (involving Density Functional Theory calculations) and machine learning approaches comprising graph convolutional network models.</p>

The aim of the present thesis is to understand the phase transformation behavior of embedded alloy nanoparticles embedded in immiscible matrices. Embedded alloy inclusions have been dispersed in immiscible matrix via rapid solidification method. The present work deals with synthesis of embedded particles, evolution of microstructure, morphology and crystallographic orientation relation relationships among different phases, phase transformation and phase stability behavior of embedded alloy inclusions in different matrices. In the present investigation the systems chosen are Bi-Sn and Bi-Pb in Zn matrix and Cd-Sn in Al matrix. Chapter 1 gives the brief introduction of present work Chapter 2 gives a brief review of nanoscale materials, various synthesis techniques, microstructure evolution, solidification and melting theories. Chapter 3 discusses the processing and experimental techniques used for characterization of the different samples in the present work. Melt-spinning technique used to synthesize the rapidly solidified ribbons. The structural characterization is carried out using X-ray diffraction and transmission electron microscopy. Chapter 4 illustrates the size dependent solubility and phase transformation behavior of Sn-Cd alloy nanoparticles embedded in aluminum matrix. X-ray diffraction study shows the presence of fcc Al, bct Sn, hcp Cd solid solution and hcp Cd phases. Based on Zen’s law, the amount of Sn present Cd solid solution is estimated. Using overlapped sterograms, the orientational relationships among various phases are found. Microscopy studies reveal that majority of the alloy nano inclusions exhibit a cuboctahedral shape with 111 and 100 facets and they are bicrystalline. STEM-EDS analysis shows that both phases exhibit size dependent solubility behavior and for particles size smaller than 18 nm, single phase solid solution could only be observed. Calorimetric studies reveal a depression in eutectic melting point of bimetallic particles. In situ heating studies show that melting initiates at triple line junction corner and melt first grows into the interior of the Sn rich phase of the particle and then later the melt grows into the interior of the Cd phase of the particle. During cooling first Cd phase solidifies later Sn phase solidifies and on further cooling at low temperatures entire particle transforming into complete solid solution phase particle. Size dependent melting studies show that during heating smaller particles melted first, later bigger particles melted. During cooling first bigger particle solidified later smaller particles solidified. High resolution imaging indicates presence of steps across particle-matrix interface that may get annihilated during heating. During cooling, molten particles in the size range of 16-30 nm solidify as solid solution which for molten particles greater than 30 nm solidify as biphasic particle. Insitu heating studies indicates that for solid particles less than 15 nm get dissolved in the Al matrix at temperatures at around 135°C. Differential scanning calorimetry (DSC) studies show in the first heating cycle most of the particles melt with an onset of melting of at 166.8°C which is close to the bulk eutectic temperature of Sn-Cd alooy. The heating cycle reveals that the melting event is not sharp which can be understood from in-situ microscopy heating studies. In the second and the third cycles, the onset of melting observed at still lower temperatures 164.3°C and 158.5°C .The decrease in onset melting point in subsequent heating cycles is attributed to solid solution formation of all small particles whose size range below 30 nm during cooling. cooling cycles exhibit an undercooling of 90°C with respect to Cd liquidus temperature. Thermal cycling experiments using DSC were carried out by arresting the run at certain pre-determined temperatures during cooling and reheating the sample to observe the change in the melting peak position and area under the peak. The areas of these endothermic peaks give us an estimate of the fraction of the particles solidified upto the temperature when the cycling is reversed. Based on experimental observations, a thermodynamic model is developed, to understand the solubility behavior and to describe the eutectic melting transition of a binary Sn-Cd alloy particle embedded in Al matrix. Chapter 5 discusses the phase stability and phase transformation behavior of nanoscaled Bi-Sn alloys in Zn matrix. Bi-Sn alloys with eutectic composition embedded in Zn matrix using melt spinning technique. X-ray diffraction study shows the presence of rhombohedral Bi, pure BCT Sn and hcp Zn phases. In X-ray diffractogram, there are also other new peaks observed, whose peak positions (interplanar spacings) do not coincide either with rhombohedral Bi or bct Sn or hcp Zn. Assuming these new phase peaks belong to bct Sn rich solid solution(based on earlier work on Bi-Sn rapidly solidified metastable alloys) whole pattern fitting done on x-ray diffractogram using Lebail method. The new phase peaks indicated as bct M1(metastable phase1), bct M2(metastable phase2) phases. The amount of Bi present in M1, M2 solid solution is estimated using Zens law. Two sets of inclusions were found, one contains equilibrium bismuth and tin phases and the other set contains equilibrium bismuth and a metastable phase. In-situ TEM experiments suggest that as temperature increases bismuth diffuses into tin and becomes complete solid solution. Melting intiates along the matrix–particle interface leading to a core shell microstructure. During cooling the entire inclusion solidify as solid solution and decomposes at lower temperatures. High temperature XRD studies show that as temperature increases M1, M2 phases peaks merge with Sn phase peaks and Bi phase peak intensities slowly disappear and on further increasing temperature Sn solid solution phase peaks also disappear. During cooling diffraction studies show that first Sn solid solution phase peaks appear and later Bi phase peaks appear. But, the peaks belong to metstable phases not appeared while cooling. Chapter 6 presents morphology and phase transformation of nanoscaled bismuth-lead alloys with eutectic (Pb44.5-Bi55.5) and peritectic (Pb70-Bi30) compositions embedded in zinc matrix. using melt spinning technique. In alloy1[ Zn-2at%(Pb44.5-Bi55.5)] inclusions were found to be phase separated into two parts one is rhombohedral Bi and the other is hcp Pb7Bi3 phase. X-ray diffraction study shows the presence of rhombohedral Bi, hcp Pb7Bi3 and hcp Zn phases in Zn-2at%(Pb44.5-Bi55.5) melt spun sample. The morphology and orientation relationships among various phases have been found. In-situ microscpy heating studies show that melt initially spreads along the matrix–particle interface leading to a core-shell microstructure. And in the core of the core-sell particles, first Bi phase melts later Pb7Bi3 phase will melt and during cooling the whole particle solidify as biphase particle with large undercooling. In-situ heating studies carried out to study the size dependent melting and solidification behavior of biphase particles. During heating smaller particles melt melt first later bigger particle will melt. In contrast, while cooling smaller particles solidifies first, later bigger particles will solidify. Detailed high temperature x-ray diffraction studies indicate there increases first Bi phase peaks disappear later Pb7Bi3 phase peaks disappear and during cooling first Pb7Bi3 phase peaks appear and later Bi phase peaks appear. In alloy2[ Zn-2at%(Pb70-Bi30)] inclusions were found to be single phase particles. X-ray diffraction study shows the presence of hcp Pb7Bi3 and hcp Zn phases in Zn-2at%(Pb70-Bi30) melt spun sample. The crystallographic orientation relationship between hcp Pb7Bi3 and hcp Zn phases. In-situ microscpy heating studies show that melting initiates across the matrix–particle interface grows gradually into the interior of the particle. Three phase equilibrium at peritectic reaction temperature is not observed during insitu heating TEM studies. Size dependent melting point depression of single phase particles is not observed from in-situ heating studies. Detailed high temperature x-ray diffraction studies show that while heating the Pb7Bi3 phase peak intensities start decreasing after 170°C and become zero at 234°C. And during cooling Pb7Bi3 phase peaks starts appearing at 200°C and on further cooling the Pb7Bi3 phase peak intensities increase upto 150°C, below this temperature peak intensities remain constant.

<p>In this work, a simple, less time consuming electrochemical method in the form of an electrochemical sensor has been developed for the detection of PAHs. The sensor was fabricated by the deposition of silver-gold (1:3) alloy nanoparticles (Ag-AuNPs) on ultrathin overoxidized polypyrrole (PPyox) film which formed a PPyox/Ag-AuNPs composite on glassy carbon electrode (PPyox/Ag-AuNPs/GCE). The silver-gold alloy nanoparticles deposited to form the composite were chemically prepared by simultaneous reduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) using sodium citrate and characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the alloy nanoparticles.</p>

<p>In this work, a simple, less time consuming electrochemical method in the form of an electrochemical sensor has been developed for the detection of PAHs. The sensor was fabricated by the deposition of silver-gold (1:3) alloy nanoparticles (Ag-AuNPs) on ultrathin overoxidized polypyrrole (PPyox) film which formed a PPyox/Ag-AuNPs composite on glassy carbon electrode (PPyox/Ag-AuNPs/GCE). The silver-gold alloy nanoparticles deposited to form the composite were chemically prepared by simultaneous reduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) using sodium citrate and characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the alloy nanoparticles.</p>

Magister Scientiae - MSc / Polyaromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants that have been shown to be teratogenic, mutagenic and carcinogenic and pose serious threats to the health of aquatic and human life. Several methods have been developed for their determination such as immunoassay, gas chromatography and high performance liquid chromatography (HPLC) in combination with fluorescence or absorbance detection. However, these methods are known to manifest underlying disadvantages such as complicated pretreatment, high costs and time consuming processes. In this work, a simple, less time consuming electrochemical method in the form of an electrochemical sensor has been developed for the detection of PAHs. The sensor was fabricated by the deposition of silver-gold (1:3) alloy nanoparticles (Ag-AuNPs) on ultrathin overoxidized polypyrrole (PPyox) film which formed a PPyox/Ag-AuNPs composite on glassy carbon electrode (PPyox/Ag-AuNPs/GCE). The silver-gold alloy nanoparticles deposited to form the composite were chemically prepared by simultaneous reduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) using sodium citrate and characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the alloy nanoparticles. Transmission electron microscopy showed that the synthesized nanoparticles were in the range of 20-50 nm. The properties of the composite formed upon deposition of the nanoparticles on the PPyox film were investigated by electrochemical methods. The PPyox/Ag-AuNPs/GCE sensor showed strong catalytic activity towards the oxidation of anthracene, phenanthrene and pyrene, and was able to simultaneously detect anthracene and phenanthrene in a binary mixture of the two. The catalytic peak currents obtained from square wave voltammetry increased linearly with anthracene, phenanthrene and pyrene concentrations in the range of 3.0 x 10-6 to 3.56 x 10-4 M,3.3 x 10-5 to 2.83 x 10-4 M, 3.3 x 10-5 to 1.66 x 10-4 M and with detection limits of 0.169 μM, 1.59 μM and 2.70 μM, respectively. The PPyox/Ag-AuNPs/GCE sensor is simple, has antifouling properties and is less time consuming with a response time of 4 s. / South Africa