Spelling suggestions: "subject:"biophysical astrochemistry"" "subject:"biophysical semiochemistry""
31 |
Bioelectrochemistry by fluorescent cyclic voltammetryMizzon, Giulia January 2012 (has links)
Understanding the factors influencing the ET characteristics of redox proteins confined at an electrochemical interface is of fundamental importance from both pure (fundamental science) and applied (biosensory) perspectives. This thesis reports on progress made in the emerging field of coupled electrochemical characterization and optical imaging in moving the analysis of redox-active films to molecular scales. More specifically the combination of cyclic voltammetry and wide-field Total Internal Reflection (TIRF) microscopy, here named ‘Fluorescent Cyclic Voltammetry’ (FCV), was applied to monitoring the response of surface-confined redox active proteins at submonolayer concentrations. The combined submicrometre spatial resolution and photon capture efficiency of an inverted TIRF configuration enabled the redox reactions of localized populations of proteins to be directly imaged at scales down to a few hundreds of molecules. This represents a 6-9 orders of magnitude enhancement in sensitivity with respect to classical current signals observed in bioelectrochemical analysis. Importantly, measurements of redox potentials at this scale could be achieved from both natural and artificially designed bioelectrochemical fluorescent switches and shed fundamental light on the thermodynamic and kinetic dispersion within a population of surface confined metalloproteins. The first three chapters of this thesis provide an overview of the relevant literature and a theoretical background to both the rapidly expanding fields of electroactive monolayers bioelectrochemistry and TIRF imaging. The initial design and construction of a robust electrochemically and optically addressable fluorescent switch, crucial to the applicability of FCV is reported in chapter 5. The generation of optically transparent, and chemically modifiable electrode surfaces suitable for FCV are also described. Chapter 6 describes the response of the surface confined azurin-based switch. Analysis of the spatially-resolved redox reaction of zeptomole samples in various conditions enables the mapping of thermodynamic dispersion across the sampled areas. In chapter 7 the newly developed FCV detection method was extended to investigate more complex bioelectrochemical systems containing multiple electron transferring redox centres and responding optically at different wavelengths. This approach provides a platform for spectral resolution of different electrochemical processes on the same sample. Finally in chapter 8 an electrochemical procedure is proposed for investigating the kinetic response of redox proteins using a fundamentally new methodology based on interfacial capacitance. In using variations in the surface chemistry to tune the rate of electron transfer, the approach was shown to be a robust and facile means of characterising redox active films in considerably more detail than possible through standard electrochemical methodologies. Ultimately, it can be applied to probe dispersion within protein populations and represents a powerful means of analysing molecular films more generally.
|
32 |
Statistical mechanics of nucleic acids under mechanical stressMatek, Christian C. A. January 2014 (has links)
In this thesis, the response of DNA and RNA to linear and torsional mechanical stress is studied using coarse-grained models. Inspired by single-molecule assays developed over the last two decades, the end-to-end extension, buckling and torque response behaviour of the stressed molecules is probed under conditions similar to experimentally used setups. Direct comparison with experimental data yields excellent agreement for many conditions. Results from coarse-grained simulations are also compared to the predictions of continuum models of linear polymer elasticity. A state diagram for supercoiled DNA as a function of twist and tension is determined. A novel confomational state of mechanically stressed DNA is proposed, consisting of a plectonemic structure with a denaturation bubble localized in its end-loop. The interconversion between this novel state and other, known structural motifs of supercoiled DNA is studied in detail. In particular, the influence of sequence properties on the novel state is investigated. Several possible implications for supercoiled DNA structures in vivo are discussed. Furthermore, the dynamical consequences of coupled denaturation and writhing are studied, and used to explain observations from recent single molecule experiments of DNA strand dynamics. Finally, the denaturation behaviour, topology and dynamics of short DNA minicircles is studies using coarse-grained simulations. Long-range interactions in the denaturation behaviour of the system are observed. These are induced by the topology of the system, and are consistent with results from recent molecular imaging studies. The results from coarse-grained simulations are related to modelling of the same system in all-atom simulations and a local denaturation model of DNA, yielding insight into the applicability of these different modelling approaches to study different processes in nucleic acids.
|
33 |
Structure and function of bacterial proteins secreted by the type three secretion and twin arginine translocation pathwaysLillington, James E. D. January 2011 (has links)
The Type Three Secretion Systems (T3SSs) of Gram-negative bacteria, including Shigella, Salmonella, and Enteropathogenic/Enterohaemorrhagic Escherichia coli (EPEC/EHEC), pass virulence factors directly into the host to mediate invasion. Prior to secretion down the narrow T3SS channel, effector proteins associate with chaperone proteins. The binding enables the T3SS to keep effectors soluble and partially unfolded for secretion. In the first part of this thesis, the association of one promiscuous chaperone, Spa15 of Shigella flexneri, with three of its cognate effectors has been studied. In addition to the role this plays in secretion, the binding of one particular substrate leads to Spa15 being involved in the regulation of the T3SS. The oligomerisation and impact of substrate binding upon Spa15 has been determined by crystallography and EPR. Once secreted, T3SS effectors subvert the host cytoskeleton for the benefit of the bacteria. Soluble homologues of Spa15 effectors from EHEC and Salmonella have been purified, and their interactions with host GTPases which lead to stress fibre phenotypes observed. The Twin Arginine Translocation (Tat) pathway provides a contrasting view of bacterial secretion. Instead of preventing folding in the cytoplasm, it is a criterion of transport that the protein be folded. One of the reasons for internal folding is the necessity to insert cofactors which could not be incorporated externally. In the second part of this thesis, a protein which exemplifies this necessity is studied. This is PhoD, the model protein for Tat export from Bacillus subtilis. PhoD is an alkaline phosphodiesterase expressed to scavenge phosphate in times of phosphate deficiency. The structure of PhoD has been solved, and the protein is shown to be able to cleave a component of its own cell wall. It uses an unusual catalytic site more reminiscent of the eukaryotic purple acid phosphatases than of other currently known alkaline phosphatases. Furthermore this site appears to require metal binding before export from the bacterial cytoplasm.
|
34 |
Conformational control by intramolecular hydrogen bondingLuccarelli, James Walter January 2013 (has links)
Hydrogen bonds are directional, non-covalent interactions between hydrogen and electronegative atoms. Although generally weak, these interactions are critical to the stability of many biological systems including proteins and DNA. This dissertation explores small molecules in which an intramolecular hydrogen bond is the key determinant of conformation. Chapter 1 introduces the protein Grb2 SH3C, details its role in cancer signalling, and delineates the idea of peptidomimetics—small molecules which are functionalized to mimic the structure of a peptide and disrupt protein-protein interactions. Chapter 2 describes a virtual screen for binders to Grb2 SH3C. From a library of 6.3 million compounds, 34 were tested in vitro and two found to bind to the protein in two orthogonal assays. Chapter 3 describes mimics of the polyproline II helix using a benzoylurea scaffold. A small library of these compounds was synthesized and tested for binding to Grb2 SH3C using SPR, a competition assay, and NMR. Chapter 4 describes attempts to mimic a 310 helix using benzamide-based peptidomimetics. The synthesis and in vitro evaluation of these molecules as ligands of Grb2 SH3C is described. Chapter 5 uses quantum chemical calculations to assess the energies of a series of molecular switches. These calculations benchmark a range of modern density functional theory calculations, and attempt to quantify the accuracy of these methods for a large, flexible system. The role of solvation, entropy, geometry, and torsional angles are assessed in accurately calculating the energies of the critical hydrogen bonds.
|
35 |
Biological membrane interfaces involved in diseases : a biophysical studyLindström, Fredrick January 2006 (has links)
Interactions between peptides and biological lipid membranes play a crucial role in many cellular processes such as in the mechanism behind Alzheimer’s disease where amyloid-beta peptide (Abeta)is thought to be a key component. The initial step of binding between a surface active peptide and its target membrane or membrane receptor can involve a non specific electrostatic association where positively charged amino acid residues and a negatively charged membrane surface interact. Here, the use of high resolution MAS NMR provides a highly sensitive and non perturbing way of studying the electrostatic potential present at lipid membrane surfaces and the changes resulting from the association of peptides. The interaction between pharmacologically relevant peptides and lipid membranes can also involve incorporation of the peptide into the membrane core and by complementing the NMR approach with differential scanning calorimetry (DSC) the hydrophobic incorporation can be studied in a non invasive way. By using 14N MAS NMR on biological lipid systems for the first time, in addition to 31P, 2H NMR and differential scanning calorimetry (DSC), gives a full picture of the changes all along the phospholipid following interactions at the membrane interface region. Being able to monitor the full length of the phospholipid enables us to differentiate between interactions related to either membrane surface association or hydrophobic core incorporation. This approach was used to establish that the interaction between nociceptin and negatively charged lipid membranes is electrostatic and hence that nociceptin can initially associate with a membrane surface before binding to its receptor. Also, it was found that Abeta can interact with phospholipid membranes via two types of interactions with fundamentally adverse effects. The results reveal that Abeta can associate with the surface of a neuronal membrane promoting accelerated aggregation of the peptide leading to neuronal apoptotic cell death. Furthermore it is also shown that Abeta can anchor itself into the membrane and suppress the neurotoxic aggregation of Abeta.
|
36 |
Protein-protein recognition in biological systems exhibiting highly-conserved tertiary structure : cytochrome P450Johnson, Eachan Oliver Daniel January 2013 (has links)
Protein tertiary structure is more conserved than amino acid sequence, leading to a diverse range of functions observed in the same fold. Despite < 20 % overall sequence identity, cytochromes P450 all have the same fold. Bacterial Class I P450s receive electrons from a highly specific, often unidentified, ferredoxin, in which case the hemoprotein is termed “orphaned”. CYP199A2, a Class I P450, accepts electrons from ferredoxins Pux and HaPux. Five orientation-dependent and one orientation-independent DEER measurements on paramagnetic HaPux and spin-labelled CYP199A2 yielded vector restraints, which were applied to building a model of the CYP199A2:HaPux complex in silico. A different binding mode was observed compared to P450cam:Pdx and P450scc:Adx, both recently elucidated by X-ray crystallography. This protocol was also applied to the CYP101D1:Arx complex. The first three measurements indicate that this heterodimer does not have a similar orientation to CYP199A2:HaPux, P450cam:Pdx, or P450scc:Adx. P450cam was fused to putidatredoxin reductase (PdR) to explore the kinetic effects with a view to improving electron transfer to orphan P450s. Heme incorporation of this enzyme depends on linker length. In whole cells, the fusion was more active after longer incubations. In vitro kinetics of the fusion exhibited some co-operativity and enhanced kinetics over the unfused system under steady-state conditions. The putative iron-sulfur biosynthesis ferredoxin PuxB had been engineered by rational mutagenesis to support catalysis by CYP199A2. It was confirmed this arose from improved protein-protein recognition. Engineering of E. coli ferredoxin based on these findings was carried out, resulting in electron-transfer to CYP199A4 from a novel engineered alien ferredoxin.
|
37 |
Applications of droplet interface bilayers : specific capacitance measurements and membrane protein corrallingGross, Linda C. M. January 2011 (has links)
Droplet Interface Bilayers (DIBs) have a number of attributes that distinguish them from conventional artificial lipid bilayers. In particular, the ability to manipulate bilayers mechanically is explored in this thesis. Directed bilayer area changes are used to make precise measurements of the specific capacitance of DIBs and to control the two dimensional concentration of a membrane protein reconstituted in the bilayer. Chapter 1 provides a general introduction to the role of the lipid membrane en- vironment in the function of biological membranes and their integral proteins. An overview of model lipid bilayer systems is given. Chapter 2 introduces work carried out in this laboratory previously and illustrates the experimental setup of DIBs. Some important bilayer biophysical concepts are covered to provide the theoretical background to experiments in this and in later chapters. Results from the characterisation of DIBs are reported, and an account of the development of methods to manipulate the bilayer by mechanical means is given. Chapter 3 describes experiments that apply bilayer area manipulation in DIBs to achieve precise measurement of specific capacitance in a range of lipid systems. Chapter 4 reports results from experiments investigating the response of bilayer specific capacitance to an applied potential. Chapter 5 covers the background and experimental setup for total internal fluo- rescence microscopy experiments in DIBs and describes the expression, purification and characterisation of the bacterial β-barrel membrane protein pore α-Hemolysin. Chapter 6 describes experiments that apply the mechanical manipulation of bilayer area in DIBs to the corralling and control of the surface density of α-Hemolysin.
|
38 |
Condensed-phase applications of cavity-based spectroscopic techniquesNeil, Simon R. T. January 2012 (has links)
This thesis describes the development and application of condensed-phase cavity-based spectroscopic techniques - namely cavity ring-down spectroscopy (CRDS); cavity enhanced absorption spectroscopy (CEAS); broadband cavity enhanced absorption spectroscopy (BBCEAS) and evanescent wave (EW) variants of all three. The recently-developed cavity technique of EW-broadband cavity enhanced absorption spectroscopy (EW-BBCEAS) has been used—in combination with a supercontinuum source (SC) and a sensitive, fast readout CCD detector—to record of the full visible spectrum (400–700 nm) of a silica-liquid interfacial layer (with an effective thickness ca. 1 µm), at rapid acquisition rates (> 600 Hz) that are sufficient to follow fast kinetics in the condensed phase, in real time. The sensitivity achieved (A<sub>min</sub>= 3.9 x 10<sup>-5</sup>) is comparable with previous EW-CRDS and EW-CEAS studies, but the spectral region accessed in this broadband variant is much larger. The study of liquid|air interfaces using EW cavity-based techniques is also illustrated for the first time. The first application of BBCEAS to the analysis of microfluidic samples, flowing through a microfluidic chip, is illustrated. Proof-of-principle experiments are presented, demonstrating the technique’s ability to provide full visible broadband spectral measurements of flowing microfluidic droplets, with both high detection sensitivity (α<sub>min</sub> < 10<sup>-2</sup> cm<sup>-1</sup>) and excellent spatial and temporal resolution: an SC light source and sensitive, fast readout CCD allowed measurement repetition rates of 273 Hz, whilst probing a very small sample volume (ca. 90 nL). A significant portion of this thesis is devoted to demonstrating the powerful capabilities of CEAS, CRDS and BBCEAS in monitoring radical recombination reactions and associated magnetic field effects (MFEs) in solution. The efficacy of CEAS as a high-sensitivity MFE detection method has been established in a proof-of-principle study, using narrow band CEAS in combination with phase-sensitive detection: MFE-induced absorbance changes of ca. 10<sup>-6</sup> could be detected using the modulated CEAS technique and the data are shown to be superior to those obtained using conventional transient absorption (TA) methods typically employed for MFE measurements. The powerful capabilities of CRDS in monitoring radical recombination reactions and associated MFEs are also demonstrated. In particular, a pump-probe CRDS variant allows not only high sensitivity (A<sub>min</sub> on the order 10<sup>-6</sup>), but also sub-microsecond time-resolution. Combined, these features represent significant advantages over TA. Finally, SC-BBCEAS is used to measure full visible spectra of photoinduced reactions and their MFEs. The applicability of this approach to in vitro MFE studies of Drosophila cryptochrome is demonstrated—the results mark the first in vitro observation of a magnetic field response in an animal cryptochrome, a key result supporting the hypothesis that cryptochromes are involved in the magnetic sense in animals.
|
39 |
A glycopore for bacterial sensingShanley, Samantha Jane January 2009 (has links)
Increasing antibiotic resistance has created a need to develop rapid and reliable methods to identify bacteria and provide pertinent information to ensure suitable antibiotics or sugar therapeutics can be chosen for treatment. Carbohydrate structures attached to proteins on host cell surfaces provide a binding point for many pathogens, including bacteria. These structures can be mimicked using single monosaccharides glycosylated to alpha-hemolysin (alpha-HL). Alpha-HL is a beta-barrel pore-forming toxin secreted by Staphylococcus aureus that forms an SDS stable heptamer, which can be expressed by coupled in vitro transcription and translation and purified by polyacrylamide gel electrophoresis. The purified heptamers can be reconstituted into planar lipid bilayers and studied at the single channel level. Through single channel recordings the effects of sugar-linker lengths, different glycans and the interaction between the ‘Glycopore’ and sugar binding molecules can be studied. The glycopore, therefore, acts as a scaffold for analysing protein-sugar interactions. Studies in this thesis have focused on the synthesis of carbohydrates for site-selective protein glycosylation; cloning and in vitro transcription translation of alpha-HL monomers; and glycosylation and oligomerisation of alpha-HL to form glycopores suitable for lectin-binding studies. Lectins DC-SIGN and FimH have been expressed in Escherichia coli and these lectins as well as others have been screened using alpha-HL glycopores. The glycopores have also been investigated with bacteria in serum in a controlled molecule-specific manner using single-channel electrical recording. In this work glycosylated alpha-HL-monomers have been found to form stable heptamers which can be formed by oligomerisation on red blood cell membranes. The purified glycopores were reconstituted into planar lipid bilayers and studied at the single-channel level. Through single-channel recordings an optimised glycopore has been shown to be effective in distinguishing lectins alone and in a mixture and has afforded qualitative and quantitative information about the binding interactions between carbohydrates and sugar binding proteins. Furthermore, the glycopore has been used to sense bacteria which may provide an insight into modes of bacterial infection. In addition, a multivalent glycopore has been formed which has proved preliminary information about the effects of multivalency in lectin binding. The design and synthesis of non-beta-lactam antibiotic candidates and their evaluation has also been carried out.
|
40 |
Computational studies of ligand-water mediated interactions in ionotropic glutamate receptorsSahai, Michelle Asha January 2011 (has links)
Careful treatment of water molecules in ligand-protein interactions is required in many cases if the correct binding pose is to be identified for molecular docking. Water can form complex bridging networks and can play a critical role in dictating the binding mode of ligands. A particularly striking example of this can be found in the ionotropic glutamate receptors (iGluRs), a family of ligand gated ion channels that are responsible for a majority of the fast synaptic neurotransmission in the central nervous system that are thought to be essential in memory and learning. Thus, pharmacological intervention at these neuronal receptors is a valuable therapeutic strategy. This thesis relies on various computational studies and X-ray crystallography to investigate the role of ligand-water mediated interactions in iGluRs bound to glutamate and α-amino-3-hydroxy-5-methyl-4- isoxazole-propionic acid (AMPA). Comparative molecular dynamics (MD) simulations of each subtype of iGluRs bound to glutamate revealed that crystal water positions were reproduced and that all but one water molecule, W5, in the binding site can be rearranged or replaced with water molecules from the bulk. Further density functional theory calculations (DFT) have been used to confirm the MD results and characterize the energetics of W5 and another water molecule implicated in influencing the dynamics of a proposed switch in these receptors. Additional comparative studies on the AMPA subtypes of iGluRs show that each step of the calculation must be considered carefully if the results are to be meaningful. Crystal structures of two ligands, glutamate and AMPA revealed two distinct modes of binding when bound to an AMPA subtype of iGluRs, GluA2. The difference is related to the position of water molecules within the binding pocket. DFT calculations investigated the interaction energies and polarisation effects resulting in a prediction of the correct binding mode for glutamate. For AMPA alternative modes of binding have similar interaction energies as a result of a higher internal energy than glutamate. A combined MD and X-ray crystallographic study investigated the binding of the ligand AMPA in the AMPA receptor subtypes. Analysis of the binding pocket show that AMPA is not preserved in the crystal bound mode and can instead adopt an alternative mode of binding. This involves a displacement of a key water molecule followed by AMPA adopting the pose seen by glutamate. Thus, this thesis makes use of various studies to assess the energetics and dynamics of water molecules in iGluRs. The resulting data provides additional information on the importance of water molecules in mediating ligand interactions as well as identifying key water molecules that can be useful in the de novo design of new selective drugs against iGluRs.
|
Page generated in 0.0737 seconds