The evaluation, analysis and development of an oxygen-insensitive amperometric glucose biosensor and its application in microbial batch culture are described. The biosensor consisted of a graphite foil electrode modified with glucose oxidase and 1,1'-dimethylferrocene, and operated via mediated electron transfer from the enzyme to the electrode. Initial evaluations illustrated several operating characteristics which would be expected to cause problems in continuous monitoring applications, most notably sensor instability and a progressive increase in response time. The main underlying causes of these unfavorable characteristics were identified as enzyme loss, mediator loss and substrate diffusion limitation within the electrode. As a consequence of these insights, further development of the sensor was undertaken. A number of different electrode materials and enzyme immobilization techniques were tested, resulting in the development of a novel immobilization procedure using a hexadecylamine coating to bind 'the activated carbohydrate residues of periodate-oxidized glucose oxidase. This improved the sensor lifetime and response time under continuous operation. Strategies for the reliable application of the biosensor in fermentation monitoring were evaluated. In-line flow cell and in_§itu membrane probe approaches were considered, and the latter approach was preferred: Considerable attention was devoted to optimising the design of such probes. The best design accommodated a three electrode configuration with a multiple biosensor array. It was found necessary to allow for periodic on-line calibration within the aseptically operating probe. This configuration was successfully applied on-line to monitor glucose in batch cultures of Escherichia coli.

No description available.

Die vorliegende Arbeit beschreibt die Herstellung und Charakterisierung der ersten Antikörper gegen Triacetontriperoxid (TATP), einem hoch empfindlichen und unkonventionellen (nicht-kommerziellen) Initialsprengstoff. Entscheidend dafür war die Synthese eines TATP-imitierenden Haptens, welches die typische nonagonale Struktur des TATP mit seinen drei Peroxid- und sechs Methylgruppen nahezu perfekt nachbildet, aber den Vorzug einer zusätzlichen Carboxygruppe zur kovalenten Kopplung an Proteine aufweist. Dadurch konnte das TATP-Hapten an Rinderserumalbumin (BSA) gebunden werden, um ein immunogenes Konjugat zu erzeugen, welches die erfolgreiche Immunisierung zweier Säugetierarten, Maus und Kaninchen, ermöglichte. Der Verlauf der In vivo-Immunisierungen wurde durch die Analyse der Tierseren in regelmäßigen Abständen mittels enzymgekoppeltem Immunoassay (ELISA) verfolgt. Die polyklonalen Antikörper beider Spezies waren ungewöhnlich selektiv gegenüber TATP. Jedoch unterschied sich die Affinität der Antikörper der zwei Spezies um das 5000-fache, wobei die Kaninchenseren den Mausseren überlegen waren. Entsprechend war auch die mit Kaninchenserum erreichbare TATP-Nachweisgrenze von 0.01 µg/L deutlich besser im Vergleich zu 50 µg/L, die mit Mausserum erzielt wurden. Der Messbereich des TATP-ELISA mit Kaninchenserum deckte zudem mehr als vier Zehnerpotenzen ab, wie mittels Präzisionsprofil bestimmt wurde. Die erhaltenen TATP-Antikörper aus Kaninchen stehen damit Anwendungen in Nachweissystemen für die sehr empfindliche Detektion von TATP zur Verfügung, die u. a. in sicherheitsrelevanten Bereichen zum Einsatz kommen könnten. Als erste Anwendung wurde ein TATP-ELISA realisiert, der im Rahmen dieser Arbeit ausführlich optimiert wurde. Außerdem wurden erste Schritte zur Entwicklung eines TATP-Schnelltests (LFA) unternommen. Weitere Biosensoren auf Grundlage der neu entwickelten TATP-Antikörper sind denkbar. / The present work decribes the production and characterization of the first antibodies against triacetone triperoxide (TATP), a highly sensitive and improvised (non-commercial) primary explosive. Crucial to this work was the synthesis of a TATP-related hapten that mimics almost perfectly the typical nonagonal structure of TATP with its three peroxide and six methyl groups. Advantageously, it has an additional carboxylic acid group, which provides a conjugation site for covalent attachment to proteins. Thus, the TATP hapten could be linked to bovine serum albumin (BSA) to produce an immunogenic conjugate, allowing the successful immunization of two different mammalian species, mouse and rabbit. The in vivo immunization progress was followed by periodically analyzing the animals’ sera using enzyme-linked immunosorbent assay (ELISA). The polyclonal antibodies of both species were remarkably selective to TATP. The affinity of these TATP-antibodies was, however, different between the two species, with the rabbit sera showing an affinity about 5000-fold superior than the murine one. Consequently, the TATP detection limit of 0.01 µg/L was considerably better using the sera from rabbit in contrast to 50 µg/L when mouse serum was used. The working range of the TATP-ELISA with rabbit sera covers more than four decades, calculated from a precision profile. The obtained TATP antibodies from rabbit are now available for applications in highly sensitive detection systems for TATP, which could be employed, among others, in security-relevant areas. The first application was the realization of a TATP-ELISA, which was extensively optimized within the course of this work. Furthermore, the first steps towards the development of a lateral flow assay (LFA) targeting TATP were taken, making conceivable further biosensor platforms based on the newly developed TATP antibodies.