Emerging body-wearable sensor devices for continuous health monitoring are severely energy constrained and yet required to offer high communication reliability under fluctuating channel conditions. This thesis aims at investigating the opportunities and challenges in the use of dynamic radio transmit power control for prolonging the lifetime of such devices. We first present extensive empirical evidence that the wireless link quality can change rapidly in body area networks, and a fixed transmit power results in either wasted energy (when the link is good) or low reliability (when the link is bad). We then propose a class of schemes feasible for practical implementation that adapt transmit power in real-time based on feedback information from the receiver. We show conservative, balanced, and aggressive adaptations of our scheme that progressively achieve higher energy savings of 14%-30% in exchange for higher potential packet losses (up to 10%). We also provide guidelines on how the parameters can be tuned to achieve the desired trade-off between energy savings and reliability within the chosen operating environment. Finally, we implement and profile our scheme on a MicaZ mote based platform, demonstrating that energy savings are achievable even with imperfect feedback information, and report preliminary results on the ultra-low-power integrated healthcare monitoring platform from our collaborating partner Toumaz Technology. In conclusion, our work shows adaptive radio transmit power control as a low-cost way of extending the battery-life of severely energy constrained body wearable devices, and opens the door to further optimizations customized for specific deployment scenarios.

Emerging body-wearable sensor devices for continuous health monitoring are severely energy constrained and yet required to offer high communication reliability under fluctuating channel conditions. This thesis aims at investigating the opportunities and challenges in the use of dynamic radio transmit power control for prolonging the lifetime of such devices. We first present extensive empirical evidence that the wireless link quality can change rapidly in body area networks, and a fixed transmit power results in either wasted energy (when the link is good) or low reliability (when the link is bad). We then propose a class of schemes feasible for practical implementation that adapt transmit power in real-time based on feedback information from the receiver. We show conservative, balanced, and aggressive adaptations of our scheme that progressively achieve higher energy savings of 14%-30% in exchange for higher potential packet losses (up to 10%). We also provide guidelines on how the parameters can be tuned to achieve the desired trade-off between energy savings and reliability within the chosen operating environment. Finally, we implement and profile our scheme on a MicaZ mote based platform, demonstrating that energy savings are achievable even with imperfect feedback information, and report preliminary results on the ultra-low-power integrated healthcare monitoring platform from our collaborating partner Toumaz Technology. In conclusion, our work shows adaptive radio transmit power control as a low-cost way of extending the battery-life of severely energy constrained body wearable devices, and opens the door to further optimizations customized for specific deployment scenarios.

This thesis consists of two subjects of research: eliminating, by avoidance or removal, the effects of different types of interference on small signal recording, and a body-sensor transmitter application utilizing piezo sensors. The first topic demonstrates ECG signal and noise signal recording in the presence of various types of interference. A low-pass filter is proposed to remove power-line interference of ECG signals, and a switch between high-pass filters before amplification is proposed to avoid motion artifacts in the ECG signal. Finally, a low-cost noise recording system for educational uses that can record and analyze the noise of resistors and amplifiers in the LabVIEW program is proposed. The second topic concerns the application of a body-sensor transmitter. The sensor uses piezo film and combines the characteristics of piezo film with the characteristics of the human body and can exchange information by capacitor coupling. The signal used in the body-sensor transmitter is designed for a fixed frequency using narrow band-pass filters and is received by receivers via four methods as confirmation. Finally, the charge amplifier designed to detect signals is fabricated using a 0.35£gm 2P4M CMOS process.

The emergence of the Internet of Things (IoT) brought about the widespread of Body Sensor Networks (BSN) that continuously monitor patients using a collection of tiny-powered and lightweight bio-sensors offering convenience to both physicians and patients in the modern health care environment. Unfortunately, the deployment of bio-sensors in public hacker-prone settings means that they are vulnerable to various security threats exposing the security and privacy of patient information. This thesis presents an authentication scheme for each of two applications of medical sensor networks. The first is an ECC based authentication scheme suitable for a hospital-like setting whereby the patient is hooked up to sensors connected to a medical device such as an ECG monitor while the doctor needs real-time access to continuous sensor readings. The second protocol is a Chebyshev chaotic map-based authentication scheme suitable for deployment on wearable sensors allowing readings from the lightweight sensors connected to patients to be sent and stored on a trusted server while the patient is on the move. We formally and informally proved the security of both schemes. We also simulated both of them on AVISPA to prove their resistance to active and passive attacks. Moreover, we analyzed their performance to show their competitiveness against similar schemes and their suitability for deployment in each of the intended scenarios.

The IEEE 802.15.4 standard is an interesting technology for use in Wireless Body Sensor Networks (WBSN), where entire networks of sensors are carried by humans. In many environments the sensor nodes experience external interference for example, when the WBSN is operated in the 2.4 GHz ISM band and the human moves in a densely populated city, it will likely experience WiFi interference, with a quickly changing ``interference landscape''. In this thesis we propose Adaptive Resource Allocation schemes, to be carried out by the WBSN, which provided noticeable performance gains in such environments. We investigate a range of adaptation schemes and assess their performance both through simulations and experimentally.

Parkinson’s disease is associated with reduced coordination between respiration and locomotion. For the neurological rehabilitation research, it requires a long-time monitoring system, which enables the online analysis of the patient’s vegetative locomotor coordination. In this work a real time step detector using three-dimensional accelerometer signal for the patients with Parkinson‘s disease is developed. This step detector is a complement for a recently developed system included of intelligent, wirelessly communicating sensors. The system helps to focus on the scientific questions whether this coordination may serve as a measure for the rehabilitation progress of PD patients. / +46-762453110 +46-462886970

A realtime wireless motion tracking system is developed. The system is capable of tracking the orientations of multiple wireless sensors, using a semi-distributed implementation to reduce network bandwidth and latency, to produce real-time animation of rigid body models, such as the human skeleton. The system has been demonstrated to be capable of full-body posture tracking of a human subject using fifteen devices communicating with a basestation over a single, low bandwidth, radio channel. The thesis covers the theory, design, and implementation of the tracking platform, the evaluation of the platform’s performance, and presents a summary of possible future applications.

No description available.

Cette thèse est axée sur le domaine de la communication optique sans fil en intérieur pour la surveillance de la santé basée sur des capteurs corporels. L’état de l'art des communications optique sans fil dans les domaines infrarouge, visible et UV ainsi que l'analyse des systèmes liés à la santé utilisant cette technologie ont été fournis. Cela a permis de définir les objectifs et l'orientation de cette thèse. Nous avons étudié l'utilisation de la technologie infrarouge pour la transmission de données entre un capteur porté par un patient et des récepteurs situés aux coins d'un panneau d'éclairage central au plafond de l'environnement. Un lien en visible a été utilisé pour la transmission de données du luminaire vers le patient portant un smartphone équipé d'un décodeur. Les principaux défis étaient la robustesse des liens infrarouge et visible en ce qui concerne la mobilité du patient et l'impact du corps de l'utilisateur en raison de l'emplacement du capteur. Les simulations de canaux réalisées grâce à la technique de Ray-Tracing associée à la méthode de Monte-Carlo ont permis de déterminer le gain de canal qui est le paramètre principal représentant la performance. En raison de la mobilité du patient, l'analyse a été réalisée de manière statistique et en tenant compte de différents emplacements du capteur sur le corps, de la cheville à l'épaule. Les paramètres physiques et géométriques optimaux relatifs aux émetteurs et aux récepteurs afin de garantir les meilleures performances ont été déduites. Il a été démontré qu’il est essentiel de modéliser la présence du corps pour les deux liaisons montante et descendante. Les performances globales du système ont mis en évidence le potentiel des transmissions sans fil entièrement optiques pour la surveillance médicale basée sur des capteurs corporels. Cela a été en partie confirmé par des expérimentations menées à partir de prototypes de capteur communicant en infrarouge et de produits commerciaux pour la liaison en visible. / This thesis is focused on the field of indoor optical wireless communication for health monitoring based on body sensors. The state of the art of optical wireless in the infrared, visible and UV domains as well as the analysis of health related systems using this technology have been provided. This helped to define the objectives and orientations of this thesis. We have studied the use of infrared technology for data transmission between a sensor worn by a patient and receivers located at the corners of a central lighting panel at the ceiling of the environment. A link in visible was used for the transmission of data from the luminaire to the patient carrying a smartphone equipped with a decoder. The main challenges were the robustness of the infrared and visible links with regard to patient mobility and the impact of the user's body due to the location of the sensor. The channel simulations performed using the Ray-Tracing technique associated with the Monte-Carlo method allowed determining the channel gain, which is the main parameter representing the performance. Due to the patient mobility, the analysis was performed statistically and taking into account different locations of the sensor on the body, from the ankle to the shoulder. The optimal physical and geometrical parameters for transmitters and receivers to ensure the best performance have been deduced. It has been shown that it is essential to model the presence of the body for both uplink and downlink. The overall performance of the system has highlighted the potential of fully optical wireless transmissions for medical surveillance based on body sensors. This has been partly confirmed by experiments carried out from infrared communicating sensor prototypes and commercial products for the visible link.

The presented work considers a CDMA-based Wireless Body Area Network (WBAN) where multiple biosensors communicate simultaneously to a central node in an asynchronous fashion. The asynchronous nature of the WBAN introduces Multiple Access Interference (MAI). To combat this problem, presented is a methodology that uses a set of cyclically orthogonal spreading codes extracted from the Walsh-Hadamard matrix. When using the Cyclic Orthogonal Walsh-Hadamard Codes (COWHC) as spreading codes in the CDMA-based WBAN, the cyclic orthogonality property helps mitigate MAI amongst the on-body sensors. Presented is an ideal communication system that is most effective at mitigating MAI in proactive WBANs. The work illustrates the system optimality and effectiveness at mitigating MAI by studying the sensitivity to packet-loss through simulating the link Bit Error Rate (BER) performance. It is shown that the proposed design with COWHC, a Rayleigh flat-fading channel, BPSK modulation and a conventional receiver produce optimum MAI mitigation.