Global ETD Search

21	Zastřešení zimního stadionu / Ice Hockey stadium Chalupa, Vojtěch January 2014 (has links) The aim of this diploma thesis is the design of the roofing of an ice hockey stadium situated in Žďár nad Sázavou. Plan view dimensions are 55 m x 77 m. The structural height of the roof varies from 10 to 17 m. The roof itself consists of pipe truss girders with a span of 55 m, which are supported by columns on each side. The girders are suspended by a load-carrying arch with a span of 96 m and a camber of 29 m through a system of pre-stressed cables. To determine the internal forces, structural analysis software Scia Engineer was used. Individual elements were then manually designed.
22	Sportovní hala v Prostějově / The Sport Hall in Prostějov Houška, Daniel January 2015 (has links) The goal of the submitted thesis is a design and assessment of a steel load-bearing structure of a multipurpose sports hall situated in Prostějov. The floor plan measurements of the object are 38x54 m with the maximum ceiling height of 9,5 m. Final design variant was chosen on the basis of two preliminary drafts, both processed according to standard ČSN EN. The structure is designed with respect to ultimate and serviceability limit states. The construction consists of 10 cross-links spaced by 6,0 m. The spatial rigidity of the structure’s main load-bearing system is provided by spatial elliptic trussed girders, longitudinal and sway bracings. Roof cladding is carried by purlins placed on trusses. Steel columns are designed as a part of gable walls. The project was carried out in Scia Engineer 2014 software. Some particular elements were subsequently assessed by means of manual calculation. The thesis also includes assessment of joints, construction details and drawing documentation.
23	Rozhledna / Lookout tower Jedzoková, Patricie January 2022 (has links) The object of the diploma thesis is design and assessment of a steel lookout tower situated in Beskydy mountains. Two different variants were designed. The first variant is of square shaped plan and the second one is of hexagonal shaped plan. Both variants are spatial truss structures. They are shaped as hourglass. The variants were compared and the first one was chosen to be further developed. The lookout tower is 36 meters high and it is divided by floors. One floor is 3,6 meters high. The widest section is 8 meters, the narrowest section is 5 meters wide. The structure is pin-supported into concrete foundation. The concrete is class C25/30. The roof covering is made of trapezoidal sheet of class S280GD. Each steel element is made of steel of class S355.
24	Ocelová konstrukce výstavního pavilonu / Exhibition hall steel structure Selyvonenko, Ivan Unknown Date (has links) The subject of the diploma thesis is the design and structural analysis of an exhibition hall. The building is located in Brno city. The dimensions of a floor plan are 121,8 m x 66,5 m, the height is 17,75 m. The load-bearing structure consists of arched truss girders, which are pin-supported by fixed columns. The distance between main trusses is 8,7 m. The supporting part of the roof deck consists of solid-purlins. Spatial rigidity of the structure is ensured by cross bracing and longitudinal bracing. All structural members are made of rolled steel profiles and are designed according to current ČSN EN standards. Steel S355 is used as the construction material. This thesis consists of structural design report of main load bearing elements including connections design and drawings.
25	Administrativní centrum / Office Centre Robotka, David January 2018 (has links) This diploma thesis deals with design of steel structure with composite steel-concrete floor structure of a office building.The building is located in Moravský Krumlov. The Office buidling consist of multi-storey building and an entrance atrium. The total ground plan's dimensions are 52,8m x 48,0m. The multi-storey building has 8 floor. The maximum heigh of the building is 25,32m above ground. The project is designed in two options. For winning variant is including check and it is performed a drawings with design and check assembly details and anchorage.
26	Hala pro kovovýrobu s administrativní budovou / Hall for Metal Production with Administrative Building Kaňok, Vojtěch January 2019 (has links) This diploma thesis deals with the design of a metalworking shed with its adjacent administrative center. Both objects are statically independent. The buildings are located in the town of Bučovice. The dimensions of the shed are 54,78x72,58 m. There is an overhead crane situated in the middle wing. The shed‘s height is +11,62 m. The administrative building has L-shaped plan. Its dimensions are 27,62x8,13 m (the wider part is 15,63 m). The design of the administrative object has two variants. Both variants have composite steel-concrete ceiling structure. The heights of the objects are +11,20 m (A variant) and +18,20 m (B variant). For the A variant, drawings were also drawn up with the design and assessment of structural details and anchoring.
27	Zastřešení trojlodního sportovního objektu / The Roofing of the Three-Aisled Sport Building Labuda, Ondřej January 2014 (has links) The theme of the master’s thesis is to design wooden roof structure three-aisled building in Brno. The proposal is developed up according to standards ČSN EN. The thesis solves the static effect of the wooden structure, design of parts, and materials design. Plan dimensions are 51x14m, maximal height is 11,9m. The structure is designed for ultimate limit states and serviceability. The supporting structure is designed as solid wooden arched trusses frames's connection to the wooden pole. The thesis solve also details and solution design.
28	Víceúčelová sportovní hala / Multi - Purpose Sports Hall Baudišová, Monika January 2014 (has links) This thesis deals with design of a multi-purpose sports hall. The aim of this work is to design a support structure with a diameter of 80.0 m at ± 0.000. Construction of a circular layout in the level of ± 0.000 of an external diameter 80.0 m. Height of the hall at the top is 20.0 m Indoors girders is solved in 36 beams which meet at the middle of the rings. Ensure the stability of bracing. Anchoring is done by pin connections located at the bottom of the strip, anchored in concrete bases through the base plate and pre-concreted anchor bolts.
29	Ocelová konstrukce obchodního centra / Steel structure of a business centre Kočí, Petr January 2017 (has links) The diploma thesis elaborates on the proposal of a loadbearing steel structure of a shopping centre. Four-storey building has total lenght of 88 m, width 48 m and its base structural grid is 8 x 8 m. The total height of building is 25,4 m. First three floors above ground are designed with structural height of 5,6 m whilst the 4TH floor uses height of 4,0 m. Frame structure is formed by primary beams and castellated secondary beams. Above 4TH floor, the roof structure is designed in two alternative versions, both using solid purlins and truss girder. The 3D computer animation of the building is also part of thesis. The shopping centre that is subject of the final thesis is located in Brno area.
30	Разработка конструктивного решения каркаса одноэтажного промышленного здания из ЛСТК, оборудованного подвесным краном грузоподъемностью до 2-3 тонн : магистерская диссертация / Development of a constructive solution for the frame of a single-storey industrial building made of LSTC equipped with an overhead crane with a lifting capacity of up to 2-3 tons Никагосов, Д. В., Nikagosov, D. V. January 2021 (has links) Работа посвящена разработке нового технического решения узла крепления подкрановых балок к ригелю покрытия рамы здания из ЛСТК (легких стальных тонкостенных конструкций), а также изучению его работы под нагрузкой. В результате исследования разработаны рабочие чертежи узла крепления и инженерный метод расчета данного узла, что позволяет расширить область применения каркасов из ЛСТК для строительства однопролетных зданий с подвесными кранами грузоподъемностью до 2-3 тс. В рамках настоящего исследования разработана расчетная пространственная модель здания в ПК ЛИРА-САПР 2016, произведен статический расчет по расчетным сочетаниям усилий. На основании результатов расчета методом конечных элементов определены максимальные действующие усилия, возникающие в несущих конструкциях. / Present work is devoted to the development of a new technical solution for the attachment joint of crane beams to the girder of the building frame covering made of LSTWS (Light steel thin-walled structures), as well as the study of its operation under load. As a result of the study, working drawings of the attachment joint and an engineering method for calculating this unit were developed, which makes it possible to expand the scope of application of frames from LSTWS for the construction of single-span buildings with overhead cranes with a lifting capacity of up to 2-3 t. Within the framework of this study, a computational spatial model of the building was developed in the FEA software LIRA-SAPR 2016. Static calculation was performed based on the design combinations of efforts. Based on the results of the calculation by the finite element method (FEM), the maximum acting forces arising in the supporting structures are determined. ЛСТК ОЦИНКОВАННЫЕ ПРОФИЛИ ПРОМЫШЛЕННОЕ ЗДАНИЕ УЗЕЛ ПОДВЕСНОЙ КРАН КРАН-БАЛКА ФЕРМА БАЛКА ПОКРЫТИЕ БОЛТОВОЕ СОЕДИНЕНИЕ MASTER'S THESIS LSTWS LIGHTWEIGHT STEEL STRUCTURES THIN-WALLED STRUCTURES GALVANIZED PROFILES INDUSTRIAL BUILDING JOINTS STEEL STRUCTURES OVERHEAD CRANE CRANE-BEAM REDUCED SECTION TRUSS BEAM COATING BOLTED CONNECTION FINITE ELEMENT METHOD

Search results