Spelling suggestions: "subject:"boundary layer. meteorology."" "subject:"boundary layer. metheorology.""
111 |
Boundary Layer Parametrization in Numerical Weather Prediction ModelsSvensson, Jacob January 2015 (has links)
Numerical weather prediction (NWP) and climate models have shown to have a challenge to correctly simulate stable boundary layers and diurnal cycles. This aim of this study is to evaluate, describe and give suggestions for improvements of the descriptions of stable boundary layers in operational NWP models. Two papers are included. Paper I focuses on the description of the surface and the interactions between the surface and the boundary layer in COAMPSR, a regional NWP model. The soil parametrization showed to be of great importance to the structure of the boundary layer. Moreover, it showed also that a low frequency of radiation calculations caused a bias in received solar energy at the surface. In paper II, the focus is on the formulation of the turbulent transport in stable boundary layers. There, an implementation of a diffusion parametrization based on the amount of turbulent kinetic energy (TKE) is tested in a single column model (SCM) version of the global NWP model Integrated Forecast System (IFS). The TKE parametrization turned out to behave similarly as the currently operational diffusion parametrization in convective regimes and neutral regimes, but showed to be less diffusive in weakly stable and stable conditions. The formulations of diffusion also turned out to be very dependent on the length scale formulation. If the turbulence and the gradients of wind temperature and wind are weak, the magnitude of turbulence can enter an oscillating mode. This oscillation can be avoided with the use of a lower limit of the length scale. / Det har visat sig att det är en stor utmaning för numeriska väderprognosmodeller (NWP-modeller) att simulera stabilt skiktade atmosfäriska gränsskikt och gränsskiktets dygnscykel på ett korrekt sätt. Syftet med denna studien är att utvärdera, beskriva och ge förslag på förbättringar av beskrivningen av gränsskiktet i NWP-modeller. Studien innehåller två artiklar. Den första fokuserar på beskrivningen av markytan och interaktionen mellan marken och gränsskiktet i den regionala NWP-modellen COAMPS R . Det visade sig att beskrivningen av markytan har en signifikant inverkan på gränsskiktets struktur. Det framkom också att strålningsberäkningarna endast görs en gång i timmen vilket bland annat orsakar en bias i inkommande solinstrålning vid markytan. Den andra artikeln fokuserar på beskrivningen av den turbulenta transporten i stabila skiktade gränsskikt. En implemenering av en diffusionsparametrisering som bygger på turbulent kinetisk energy (TKE) testas i en endimensionell version av NWP-modellen Integrated Forecast System (IFS), utvecklat vid European Center for Medium Range Weather Forecasts (ECMWF). Den TKE-baserade diffussionsparametriseringen är likvärdigt med den nuvaran de operationella parametriseringen i neutrala och konvektiva gränsskikt, menär mindre diffusivt i stabila gränsskikt. Diffusionens intensitet är beroende påden turbulenta längdskalan. Vidare kan turbulensen i TKE-formuleringen hamna i ett oscillerande läge om turbulensen är svag samtidigt som temperatur- och vindgradienten är kraftig. Denna oscillation kan förhindras om längdskalans minsta tillåtna värde begränsas.
|
112 |
Radiative-diffusive models of the Arctic boundary layerHerman, Gerald Francis January 1975 (has links)
Thesis. 1975. Sc.D.--Massachusetts Institute of Technology. Dept. of Meteorology. / Vita. / Bibliography: leaves 164-170. / by Gerald F. Herman. / Sc.D.
|
113 |
Fair-weather electric charge transfer by convection in an unstable planetary boundary layer.Willett, John Clark January 1976 (has links)
Thesis. 1976. Ph.D.--Massachusetts Institute of Technology. Dept. of Meteorology. / Microfiche copy available in Archives and Science. / Vita. / Bibliography: leaves 240-244. / Ph.D.
|
114 |
Measurements and multifractal analysis of turbulent temperature and velocity near the groundWang, Yu, 1964- January 1995 (has links)
No description available.
|
115 |
MF radar observations of D-region electron densities at Adelaide / by Rupa Vuthaluru.Vuthaluru, Rupa January 2003 (has links)
"July, 2003" / Includes bibliographical references (leaves 177-183) / xxii, 183 leaves : ill. (some col.) ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / Thesis (Ph.D.)--University of Adelaide, School of Chemistry and Physics, Discipline of Physics and Mathematical Physics, 2004
|
116 |
The use of conserved variables in the modeling and parameterization of shallow cumulus trade wind boundary layersBarbour, Philip L. (Philip Lee), 1960- 16 March 1992 (has links)
A time dependent model of the shallow, tropical convective boundary layer is
developed and tested. To simplify the treatment of thermodynamic processes and
return to first principles of physics, conserved quantities of entropy and total
water density are used as primary model variables. In addition, a new shallow
cumulus parameterization scheme is developed and is based on the use of a time
dependent cloud kinetic energy equation combining local concepts of cloud processes
with the use of a special buoyancy length scale. Two model simulations are
performed in an attempt to assess the model's performance and the effectiveness of
the parameterization scheme.
Results indicate that the model does a reasonable job in both representing the
equilibrium structure of a shallow convective boundary layer and in generating a
realistic boundary layer structure from an initial state consisting of a shallow
moist layer with dry air aloft. The cumulus parameterization scheme appears to
adequately represent the transport of thermodynamic quantities associated with
convective activity and the use of conserved variables provides an effective way of
representing the boundary layer structure and treating the mixing processes
associated with cloud processes.
This work illustrates the usefulness of generalized conserved variables,
particularly entropy and total water density, and indicates that the general
approach of using a time dependent cloud kinetic energy equation may be effective
for representing thermodynamic processes in the tropical boundary layer. / Graduation date: 1992
|
117 |
On Antarctic Wind EngineeringSanz Rodrigo, Javier 18 March 2011 (has links)
Antarctic Wind Engineering deals with the effects of wind on the built environment. The assessment of wind induced forces, wind resource and wind driven snowdrifts are the main tasks for a wind engineer when participating on the design of an Antarctic building. While conventional Wind Engineering techniques are generally applicable to the Antarctic environment, there are some aspects that require further analysis due to the special characteristics of the Antarctic wind climate and its boundary layer meteorology.
The first issue in remote places like Antarctica is the lack of site wind measurements and meteorological information in general. In order to complement this shortage of information various meteorological databases have been surveyed. Global Reanalyses, produced by the European Met Office ECMWF, and RACMO/ANT mesoscale model simulations, produced by the Institute for Marine and Atmospheric Research of Utrecht University (IMAU), have been validated versus independent observations from a network of 115 automatic weather stations. The resolution of these models, of some tens of kilometers, is sufficient to characterize the wind climate in areas of smooth topography like the interior plateaus or the coastal ice shelves. In contrast, in escarpment and coastal areas, where the terrain gets rugged and katabatic winds are further intensified in confluence zones, the models lack resolution and underestimate the wind velocity.
The Antarctic atmospheric boundary layer (ABL) is characterized by the presence of strong katabatic winds that are generated by the presence of surface temperature inversions in sloping terrain. This inversion is persistent in Antarctica due to an almost continuous cooling by longwave radiation, especially during the winter night. As a result, the ABL is stably stratified most of the time and, only when the wind speed is high it becomes near neutrally stratified. This thesis also aims at making a critical review of the hypothesis underlying wind engineering models when extreme boundary layer situations are faced. It will be shown that the classical approach of assuming a neutral log-law in the surface layer can hold for studies of wind loading under strong winds but can be of limited use when detailed assessments are pursued.
The Antarctic landscape, mostly composed of very long fetches of ice covered terrain, makes it an optimum natural laboratory for the development of homogeneous boundary layers, which are a basic need for the formulation of ABL theories. Flux-profile measurements, made at Halley Research Station in the Brunt Ice Shelf by the British Antarctic Survery (BAS), have been used to analyze boundary layer similarity in view of formulating a one-dimensional ABL model. A 1D model of the neutral and stable boundary layer with a transport model for blowing snow has been implemented and verified versus test cases of the literature. A validation of quasi-stationary homogeneous profiles at different levels of stability confirms that such 1D models can be used to classify wind profiles to be used as boundary conditions for detailed 3D computational wind engineering studies.
A summary of the wind engineering activities carried out during the design of the Antarctic Research Station is provided as contextual reference and point of departure of this thesis. An elevated building on top of sloping terrain and connected to an under-snow garage constitutes a challenging environment for building design. Building aerodynamics and snowdrift management were tested in the von Karman Institute L1B wind tunnel for different building geometries and ridge integrations. Not only for safety and cost reduction but also for the integration of renewable energies, important benefits in the design of a building can be achieved if wind engineering is considered since the conceptual phase of the integrated building design process.
|
118 |
Advancing Assessments on Aerosol Radiative Effect by Measurement-based Direct Effect Estimation and through Developing an Explicit Climatological Convective Boundary Layer ModelZhou, Mi 09 November 2006 (has links)
The first part of the thesis assesses the aerosol direct radiative effect (ADRE) with a focus on ground-based AERONET and satellite MODIS measurements. The AERONET aerosol climatology is used, in conjunction with surface albedo and cloud products from MODIS, to calculate the ADRE and its normalized form (NADRE) for distinct aerosol regimes. The NADRE is defined as the ADRE normalized by optical depth at 550 nm and is mainly determined by internal aerosol optical properties and geographical parameters. These terms are evaluated for cloud-free and cloudy conditions and for all-mode and fine-mode aerosols. We find that the NADRE of fine-mode aerosol is larger at the TOA but smaller at the surface in comparison to that of all-mode aerosol. Cloudy-sky TOA ADRE with clouds is sensitive to the relative location of aerosols and cloud layer. The high-resolution MODIS land surface albedo is also applied to study the clear-sky ADRE over North Africa and the Arabian Peninsula for summer 2001. TOA ADRE shows the high spatial variability with close similarity to that of surface albedo.
The second part of the thesis is to develop a 2-D conceptual model for a climatological convective boundary layer over land as a persistent and distinct component in climate models, where the convective-scale motion is explicitly described by fluid dynamics and thermodynamics while the smaller scale effect is parameterized for a neutral stratification. Our conceptual model reasonably reproduces essential statistics of a convective boundary layer in comparison to large eddy simulations. The major difference is that our model produces a better organized and more constrained spatial distribution with coherent convective cells. The simulations for a climatological convective boundary layer are conducted for a prescribed constant and homogenous surface heat flux and a specified cooling term representing the background large scale thermal balance. The results show the 2-D coherent structures of convective cells with characteristic scales comparable with PBL height; downward maximum velocities being 70-80% of the accompanying upward maxima; vertical profiles of a constant potential temperature and linear decreasing heat fluxes; a square-root increase in the velocity magnitude with increasing surface heat flux.
|
119 |
Processes important for forecasting of clouds over snowHagman, Martin January 2020 (has links)
The Swedish Armed Forces setup of the Weather Research and Forecasting Model (WRF) has problems to forecast low clouds in stably stratified conditions when the ground is covered by snow. The aim of this thesis is to understand what causes this deficit. Simulations during January and February 2018 are here compared with observations from Sodankylä in northern Finland. It is revealed that neither type of planetary boundary layer parameterization chosen nor vertical or horizontal interpolation are responsible for the deficiency. Instead, our experiments show that, to first order, poor initialization of Stratocumulus (Sc) clouds from the host model, Atmospheric Model High Resolution (HRES), of the Integrated Forecast System (IFS) is the missing link. In situations when Sc clouds are missing in the IFS analysis, although they exist in reality, we use information from vertical soundings from Sodankylä. In the initialization process we used the fact that liquid potential temperature is constant in a well-mixed cloud. Initializing cloud water and cloud ice from IFS HRES and from soundings with different methods improves the model performance and the formation of very low artificial clouds at the first model level is prohibited.
|
120 |
Glacier-climate interactions : a synoptic approachMatthews, Tom K. R. January 2013 (has links)
The reliance on freshwater released by mountain glaciers and ice caps demands that the effects of climate change on these thermally-sensitive systems are evaluated thoroughly. Coupling climate variability to processes of mass and energy exchange at the glacier scale is challenged, however, by a lack of climate data at an appropriately fine spatial resolution. The thesis addresses this challenge through attempting to reconcile this scale mismatch: glacier boundary-layer observations of meteorology and ablation at Vestari Hagafellsjökull, Iceland, and Storglaciären, Sweden, are related to synoptic-scale meteorological variability recorded in gridded, reanalysis data. Specific attention is directed toward synoptic controls on: i) near-surface air temperature lapse rates; ii) stationarity of temperature-index melt model parameters; and iii) glacier-surface ablation. A synoptic weather-typing procedure, which groups days of similar reanalysis meteorology into weather categories , forms the basis of the analytical approach adopted to achieve these aims. Lapse rates at Vestari Hagafellsjökull were found to be shallowest during weather categories characterised by warm, cloud-free weather that encouraged katabatic drainage; steep lapse rates were encountered in weather categories associated with strong synoptic winds. Quantitatively, 26% to 38% of the daily lapse-rate variability could be explained by weather-category and regression-based models utilizing the reanalysis data: a level of skill sufficient to effect appreciable improvements in the accuracy of air temperatures extrapolated vertically over Vestari Hagafellsjökull. Weather categories also highlighted the dynamic nature of the temperature-ablation relationship. Notably, the sensitivity of ablation to changes in air temperature was observed to be non-stationary between weather categories, highlighting vulnerabilities of temperature-index models. An innovative solution to this limitation is suggested: the relationship between temperature and ablation can be varied as a function of weather-category membership. This flexibility leads to an overall improvement in the simulation of daily ablation compared to traditional temperature-index formulations (up to a 14% improvement in the amount of variance explained), without the need for additional meteorological data recorded in-situ. It is concluded that weather categories are highly appropriate for evaluating synoptic controls on glacier meteorology and surface energetics; significant improvements in the parameterization of boundary-layer meteorology and ablation rates are realised through their application.
|
Page generated in 0.0544 seconds