This thesis presents a way of automatically generating a landscape painting in the artistic style of Bob Ross. First, a relatively simple, yet effective and versatile, painting model is presented. The brushes of the painting model can be used on their own for creative applications or as a lower layer to the software components responsible for automation. Next, the brush strokes and parameters used to automatically paint eight different landscape features, each with its own adjustable attributes and randomized forms, are described. Finally, the placement of all of the automated landscape features required to achieve the layout of one of Bob Ross's landscape paintings is shown.

This thesis presents a way of automatically generating a landscape painting in the artistic style of Bob Ross. First, a relatively simple, yet effective and versatile, painting model is presented. The brushes of the painting model can be used on their own for creative applications or as a lower layer to the software components responsible for automation. Next, the brush strokes and parameters used to automatically paint eight different landscape features, each with its own adjustable attributes and randomized forms, are described. Finally, the placement of all of the automated landscape features required to achieve the layout of one of Bob Ross's landscape paintings is shown.

Lorsqu’un avion atterrit, la force principale nécessaire pour arrêter l’avion est obtenue par le freinage. Par une réduction de la vitesse de rotation des roues, les freins provoquent une vitesse de glissement entre les pneus et la piste. C’est cette différence de vitesse qui génère la force de freinage capable de stopper l’avion. La modélisation de cette force est essentielle pour l’estimation de la longueur de piste à l’atterrissage. Les modèles classiques utilisés par les avionneurs sont assez simplistes et dérivent expérimentalement des modèles de frictions les plus simples. De sorte que ces modèles sont dans l’incapacité d’estimer l’influence de paramètres clefs influençant la force de freinage. Il s’agit, en particulier de la pression des pneus, de la nature de la gomme, de la température ambiante et de celle de la gomme, de l’état de la piste, de sa texture, etc. L’objectif de la thèse a été de développer un modèle de contact pneu-piste capable d’estimer la force de freinage. C’est le « Brush Model » qui a servi de base à cette modélisation. En phase de freinage la zone de contact est constituée d’une première zone de déformation de la gomme qui crée une force résistante en suivant la loi de Hooke, puis d’une seconde zone de glissement dont la force de résistance suit la loi de Coulomb. Ce modèle a été amélioré grâce aux résultats de la mécanique des structures pour la loi de Hooke et grâce aux résultats de la tribologie pour la loi de Coulomb. Ces deux modélisations faisant appel aux données issues de la science des matériaux. L’ensemble de ces modélisations a été enrichi par une coopération avec plusieurs centres de recherches ayant fourni de nombreux résultats expérimentaux. Le modèle obtenu a ensuite été confronté avec des résultats d’essais en vol obtenus avec « Airbus Operations S.A.S ». La thèse a validé le prétraitement des données d’essais ainsi que le processus d’identification qui a permis de montrer l’accord du modèle avec les résultats expérimentaux obtenus lors des essais en vol. Cette modélisation donne des résultats très encourageants, elle permet une compréhension beaucoup plus approfondie des effets de l’environnement sur les forces de freinage. De sorte que cette thèse a permis d’améliorer très sensiblement la compréhension fondamentale des phénomènes en jeu lors du freinage, au contact entre le pneu et la piste. Chez Airbus, les résultats obtenus vont servir de base pour les travaux à venir sur ce thème. / As an aircraft lands on a runway, the principal force acting to stop the aircraft within the confines of the runway is generated by the brakes. The brakes cause the tire’s rotational speed to slow down with regards to the aircraft’s speed over the ground. This difference in speed causes friction and it is this friction that is the principal force to stop the aircraft. In order to be able to estimate the stopping distance of an aircraft an understanding of this friction is essential. Traditionally, aircraft manufactures have relied on simplistic, empirically derived friction models. However, these empirical models cannot estimate the influence of several key factors that are known (scientifically) to affect friction such as the rubber temperature, the runway texture, the ambient air temperature and the rubber composition to name a few. This PhD work aims to develop a frictional model that can be used to estimate the friction developed between an aircraft tire and the runway. A model commonly known as the Brush Model, is derived for usewith aircraft tires and runways. The underlying physics of this model are developed using the established scientific theories of tribology, material science and strength of materials. Coordination with several research institutes provides experimental results to reinforce the model. The model is then compared with flight test results obtained from a partnership with Airbus OperationsS.A.S. The PhD works demonstrates the entire validation process from flight test data cleaning, the derivation of a curve-fitting algorithm and the matching of derived model with the flight test data. The modeling has shown very encouraging results. It allows for a much deeper understanding of the environmental effects on friction. This PhD work has greatly improved the fundamental understanding of friction and will serve as a base for future works with Airbus.

A large portion of the world’s total emissions is caused by the transport sector where rolling resistance is one of the contributing factors. The inner tyre temperature is a factor that greatly influences the rolling resistance. The effect of temperature and rolling resistance is often examined in standardised tests carried out in a lab environment. In this work, field tests were carried to find out typical operating temperatures in real driving scenarios. The field tests were carried out on one set of A-class tyres and one set of B-class tyres at different speeds: city-, small country road-, large country road- and motorway driving. Tests were performed in varying ambient temperatures and weather conditions. The results show that the rear inner tyre temperature varies between 11 to 36C in the spring around Linköping in Sweden. A brush model was also developed to see how accurately the rolling resistance could be predicted. With springs, dampers, and Coulomb friction elements the behaviour of rubber was captured. The final model contains five model parameters that were estimated by parameter fitting to measurement data, using optimisation. Measurements were carried out at a test rig that measures the forces acting on the tyre. The measurements were performed for both the A-class and B-class tyre at two different temperatures corresponding to the findings from the field tests. The results show that the developed model has a promising correlation with the measurements for all loads and speeds that were tested.

The tyre is an essential part of a road vehicle. It is in the contact between road and tyre that the forces that create the possibility for the driver to control the vehicle are generated. Tyres, however, wear down, which leads to both unhealthy wear particles and disposal of old tyres, both of which are harmful to the environment. If one could learn more about what causes wear, it might be possible to reduce tyre wear, which would be beneficial from both an economic and an ecological point of view. The aim of this thesis work is to develop a tyre model that can simulate tyre wear and take temperature, pressure and vehicle settings into account. Based on tyre brush theory, a tyre wear model has been developed which includes a thermal model, a pressure model and a friction model. Simulations and analysis of different cases has been performed. From the results, one can conclude the following: the tyre temperature and inflation pressure change with the distance the vehicle travels at the beginning and later become steady; higher external temperature will decrease tyre wear rate since the inflation pressure increases with the external temperature and the sliding friction decreases; higher vehicle speed leads to a higher tyre wear rate; the tyre temperature increases with increasing vehicle speed; the amount of tyre wear increases linearly with the normal load on the tyre; the tyre wear increases with the slip ratio exponentially due to both the siding distance and the sliding friction increasing with the slip ratio; the tyre wear increases exponentially with the slip angle. The complete model can estimate the tyre wear with different vehicle settings and external factors. More experiments are needed in the future to validate the complete model. In addition, since the heat transfer coefficient is changeable with temperature, the thermal model can be improved by introducing dynamic heat transfer coefficients. The Savkoor friction model used in the report can also be improved by tuning its parameters using more experimental data.

No description available.

Efforts to reduce greenhouse gas emissions from today’s increasing number of cars and trucks, are crucial in counteracting global warming. These efforts include the intent to reduce the effects of the resistive forces acting on the vehicle. Rolling resistance is one of these forces. A reduction in rolling resistance would aid in reducing greenhouse gas emissions, while also reducing the driving costs and increasing the driving range per charge for electric vehicles. This PhD research contributes to these efforts by the development of a rolling resistance measurement method on a flat track test equipment that avoids the curvature effects present in the standardised drum test. Another contribution is the development of a rolling resistance model that can describe the relationship between the tyre deformation and the forces acting on the tyre. The model is parametrised by results from the developed measurement method and is simple enough to be included in complete vehicle dynamicssimulations. In this thesis, the effects of different operational conditions, such as inflation pressure, tyre temperature, speed, load, road surface or tyre angles, are investigated and presented. The results from this investigation were used for the development of the measurement method for flat track test equipment. Tyre temperature is an important operating condition influencing rolling resistance and the proposed measurement method can be used to investigate rolling resistance at different tyre temperatures. The results obtained with the proposedmeasurement method, which are comparable to drum measurements performed under the same operating conditions, are used to parameterise the developed rolling resistance model. The model gives a good fit for the relationship between rolling resistance and tyre deformation. The measurement method and the model build a good platform for deeper investigations of rolling resistance and its connection to tyre temperature. / Arbete för att minska utsläppen av växthusgaser från det ökande antalet bilar och lastbilar är en viktig del i att motverka den globala uppvärmningen. Detta kan göras genom att reducera påverkan från de resistiva krafter som påverkar fordonet, med fokus på rullmotståndet. En minskning av fordonens rullmotstånd skulle medverka till att minska växthusgasutsläppen samt bidra till att reducera körkostnaderna och öka räckvidden per laddning för elbilar.Denna licentiatuppsats bidrar till detta genom att skapa en metod för rullmotståndsmätningar på plant underlag, för att kunna undvikakrökningseffekterna i den standardiserade trummätningen. Ett annatbidrag är en rullmotståndsmodell som beskriver växelverkan mellan däckdeformationer och däckkrafter. Modellen parametriseras med resultat från den framtagna mätmetoden och är tillräckligt enkel för att vara användbar i en komplett fordonsdynamiksimulering. I denna uppsats presenteras påverkan av olika driftsvillkor som däcktryck, däcktemperatur, hastighet, last, underlag och kurvatur. Dessa resultat nyttjades i utvecklandet av nämnda mätmetod för rullmotståndsmätningar på plant underlag. Däcktemperatur är ett viktigt driftsförhållande med stor påverkan på rullmotståndet och den föreslagna mätmetoden kan användas för att mäta rullmotstånd vid olika däcktemperaturer. Denna mätmetod användes sedan för att parametrisera indata till den utvecklade rullmotståndsmodellen. Det visade sig att modelldata avviker från uppmätt data för förhållandet mellan hjullast och däckdeformation på grund av modellgeometrin. Men modellen ger en god överenstämmelse för förhållandet mellan däckdeformation och rullmotstånd. Mätmetoden är, tillsammans med den föreslagna modellen, en bra bas för mer genomgående undersökningar av rullmotstånd och dess korrelation med däcktemperatur.

Efforts to reduce greenhouse gas emissions from today’s increasing number of cars and trucks, are crucial in counteracting global warming. These efforts include the intent to reduce the effects of the resistive forces acting on the vehicle. Rolling resistance is one of these forces. A reduction in rolling resistance would aid in reducing greenhouse gas emissions, while also reducing the driving costs and increasing the driving range per charge for electric vehicles. This PhD research contributes to these efforts by the development of a rolling resistance measurement method on a flat track test equipment that avoids the curvature effects present in the standardised drum test. Another contribution is the development of a rolling resistance model that can describe the relationship between the tyre deformation and the forces acting on the tyre. The model is parametrised by results from the developed measurement method and is simple enough to be included in complete vehicle dynamicssimulations. In this thesis, the effects of different operational conditions, such as inflation pressure, tyre temperature, speed, load, road surface or tyre angles, are investigated and presented. The results from this investigation were used for the development of the measurement method for flat track test equipment. Tyre temperature is an important operating condition influencing rolling resistance and the proposed measurement method can be used to investigate rolling resistance at different tyre temperatures. The results obtained with the proposedmeasurement method, which are comparable to drum measurements performed under the same operating conditions, are used to parameterise the developed rolling resistance model. The model gives a good fit for the relationship between rolling resistance and tyre deformation. The measurement method and the model build a good platform for deeper investigations of rolling resistance and its connection to tyre temperature. / Arbete för att minska utsläppen av växthusgaser från det ökande antalet bilar och lastbilar är en viktig del i att motverka den globala uppvärmningen. Detta kan göras genom att reducera påverkan från de resistiva krafter som påverkar fordonet, med fokus på rullmotståndet. En minskning av fordonens rullmotstånd skulle medverka till att minska växthusgasutsläppen samt bidra till att reducera körkostnaderna och öka räckvidden per laddning för elbilar.Denna licentiatuppsats bidrar till detta genom att skapa en metod för rullmotståndsmätningar på plant underlag, för att kunna undvikakrökningseffekterna i den standardiserade trummätningen. Ett annatbidrag är en rullmotståndsmodell som beskriver växelverkan mellan däckdeformationer och däckkrafter. Modellen parametriseras med resultat från den framtagna mätmetoden och är tillräckligt enkel för att vara användbar i en komplett fordonsdynamiksimulering. I denna uppsats presenteras påverkan av olika driftsvillkor som däcktryck, däcktemperatur, hastighet, last, underlag och kurvatur. Dessa resultat nyttjades i utvecklandet av nämnda mätmetod för rullmotståndsmätningar på plant underlag. Däcktemperatur är ett viktigt driftsförhållande med stor påverkan på rullmotståndet och den föreslagna mätmetoden kan användas för att mäta rullmotstånd vid olika däcktemperaturer. Denna mätmetod användes sedan för att parametrisera indata till den utvecklade rullmotståndsmodellen. Det visade sig att modelldata avviker från uppmätt data för förhållandet mellan hjullast och däckdeformation på grund av modellgeometrin. Men modellen ger en god överenstämmelse för förhållandet mellan däckdeformation och rullmotstånd. Mätmetoden är, tillsammans med den föreslagna modellen, en bra bas för mer genomgående undersökningar av rullmotstånd och dess korrelation med däcktemperatur.