The two stage Lucite Alpha Process for the industrial manufacturing of methyl methacrylate (MMA) represents one of the most efficient technologies currently available for the large scale production of this important chemical commodity. The second stage of this process, which involves the condensation of methyl propanoate (MeP) with formaldehyde over a heterogeneous fixed bed catalyst, however, still shows great scope for improvement. Herein the development of a novel homogeneous catalytic system that would promote the condensation of either propanoic acid or MeP with formaldehyde is explored. Since C–C bond forming reactions which proceed via C–H activation pathways typically display high atom efficiency, our efforts were particularly focussed on employing a functionalisation strategy that is mediated by C–H activation. In the case of propanoic acid, the possibility of achieving regioselective α-methylenation by linking the substrate to phosphorus was evaluated. Thus, a series of acyloxyphosphines and acylphosphites derived from either propionic acid or phenylacetic acid was prepared and, where stability allowed, fully characterised. Some of the resultant simple mixed anhydrides posed problems relating to their stability, and the stabilisation of such ligand systems by using electronic and / or steric effects was therefore explored. In addition, the coordination chemistry and in solution behaviour of Rh(I) and Ru(II) complexes containing these ligands was examined. Similar to the free ligands, complexes derived from these mixed anhydrides rearranged in solution via a number of decomposition pathways, with the specific pathway dependent on the nature of the auxiliary ligands. For most of these complexes, however, ligand decarbonylation was the route of preference for decomposition. Despite the instability of these complexes, a selection of Rh(I) mixed anhydride complexes were assessed for their potential as C-H activation catalysts in reactions aimed at the α-methylenation of saturated carboxylic acids. Furthermore, the stabilisation of Rh(I) mixed anhydride complexes with chelating auxilary ligands, such as bisphosphines or N-substituted diphosphinoamines, was explored. In particular, a series of new Rh(I) mixed anhydride complexes containing dppe, dppb and dppbz as secondary ligands were prepared and the effects of these secondary ligands on the in solution stability of these complexes assessed. As MeP represents the final product in the first stage of the Alpha process and not propanoic acid, the utilisation of PNP iridium pincer complexes in the regioselective sp³ C–H activation of MeP and related esters was also examined. The factors that govern the regioselectivity of such reactions were of great interest to us and, in particular, the effects of water on the reactivity and regioselectivity of these reactions were explored. For MeP, preferential C–H activation of the methoxy group was found to proceed under anhydrous conditions and the catalytic functionalisation of this site with ethene using this activation approach was considered. Formaldehyde, employed in the second stage of the Alpha process, is a difficult substance to manufacture and handle, especially on a large scale. A preliminary study on the in situ production of anhydrous formaldehyde via the catalytic dehydrogenation of methanol was therefore performed. During this study, catalytic systems based on carbonate salts and / or transition metal complexes were considered. In the hope of reducing the number of steps required in the production of MMA, a new one-pot cascade reaction for the indirect α-methylenation of MeP with methanol was developed. Although the production of MMA using this system only proceeded with low efficiency, the obtained results serve as an important proof of concept for future developments in this area. Finally, the capacity of a series of simple bases to catalyse the condensation of MeP with formaldehyde was assessed as part of a fundamental study directed towards determining the factors that govern the efficiency of this reaction. In addition, the extent to which each base effects the deprotonation in the α-position of MeP was determined with the aid of deuterium labelling experiments. Similarly, using sodium propanoate as model base a rough estimate of the kinetics of deprotonation could be made based on the degree of deuterium incorporation over time. These studies suggested that the low efficiency of this condensation reaction is not caused by ineffective deprotonation but rather by the weak nucleophilicity of the generated carbanion. For this reason, attempts to increase the electrophilicity of formaldehyde through Mannich-type condensations reactions involving secondary amine and carboxylic acid additives were made.

No description available.

Investigation of the catalytic formation, reactivity and synthetic scope of sp³-gem-organodimetallic palladio(II)/main group metal (main group metal = tributylstannyl, dialkylalumino) alkane species has been carried out. Insight was expanded regarding the inter- and intramolecular reactivity of vinylmetallic reagents in presence of transition metal catalysts. New Pd-catalysed methodologies for carbon-carbon bond formation were developed, such as cyclopropanation of strained olefins, as well as tandem vinylalane arylation/1,2-methyl transfer and 1,2-diarylation. On the one hand, geminal π-allylpalladio(II)/tributylstannylalkane intermediates are produced by oxidative addition of Pd(0) catalysts to α-tributylstannylpropenyl acetate derivatives. They adopt ambiphilic behaviour depending on the transition metal pre-catalyst, presence or absence of phosphine ligands, and reaction temperature. In presence of tetrakis(triphenylphosphine)palladium(0) with additional bidentate ligand, the carbenoid reactivity of these gem-organobismetallic species is exposed by reaction with dimethyl malonate. Deuterium-labeling studies demonstrated sequential functionalisation of the C-Sn and C-Pd bonds. Conversely, phosphine-free catalyst bis(dibenzylideneacetone)palladium(0) uncovers metal-carbene reactivity, and dimerisation and strained alkene cyclopropanation reactions are observed. The nature of the palladium catalyst controls the reactivity of the carbenoid species. Finally, bis(cyclooctadienerhodium(I) chloride) catalytically activates the alkenylstannane moiety, leaving the allylic acetate leaving group available for further transformations. On the other hand, gem-disubstituted trifluoromethanesulfonyloxy- and iodopalladio(II)/ dialkylaluminoneopentane species are generated by intramolecular migratory insertion of 2,2-disubstituted-1-butenyldialkylalanes with σ-arylpalladium(II) triflate and iodide intermediates. Using excess Lewis-basic 1,4-diazabicyclo[2.2.2]octane, electron-rich tris(para-methoxyphenyl)phosphine ligand and acetonitrile as solvent, tandem arylation/1,2-alkyl migration from aluminum to carbon affords 7-substituted-1-ethyl-1-methylindanes containing an all-carbon quaternary stereogenic centre in good yields. This reaction is tolerant of 6-aryl methyl ethers, thioethers and trimethylsilanes. Deuterium labeling established that protiodealumination of the key neopentyl(methyl)aluminum triflate intermediate is caused by the acetonitrile solvent. The organodimetallic species in that study were shown to be configurationally stable, hence the stereospecificity of the process that proceeds via carbopalladation, transmetalation and reductive elimination of an alkylpalladium(II) intermediate. When applied to 1-naphthyl triflate-tethered vinylalanes, the same reaction conditions mediate stereospecific 1,2-diarylation, leading to 2,3,3a,4-tetrahydro-1H-cyclopenta[def]phenanthrenes in excellent yields. The influence of DABCO, tether length and solvent polarity was studied. Selective tandem arylation/1,2-methyl migration could also be achieved in non-polar solvent in absence of Lewis base. While steric properties took precedence over electronic considerations when inducing product selection, preagostic C-H···Pd interactions were postulated to facilitate 1,3-metal migration in the production of 1H-cyclopenta[def]phenanthrene derivatives.

Investigation of the catalytic formation, reactivity and synthetic scope of sp³-gem-organodimetallic palladio(II)/main group metal (main group metal = tributylstannyl, dialkylalumino) alkane species has been carried out. Insight was expanded regarding the inter- and intramolecular reactivity of vinylmetallic reagents in presence of transition metal catalysts. New Pd-catalysed methodologies for carbon-carbon bond formation were developed, such as cyclopropanation of strained olefins, as well as tandem vinylalane arylation/1,2-methyl transfer and 1,2-diarylation. On the one hand, geminal π-allylpalladio(II)/tributylstannylalkane intermediates are produced by oxidative addition of Pd(0) catalysts to α-tributylstannylpropenyl acetate derivatives. They adopt ambiphilic behaviour depending on the transition metal pre-catalyst, presence or absence of phosphine ligands, and reaction temperature. In presence of tetrakis(triphenylphosphine)palladium(0) with additional bidentate ligand, the carbenoid reactivity of these gem-organobismetallic species is exposed by reaction with dimethyl malonate. Deuterium-labeling studies demonstrated sequential functionalisation of the C-Sn and C-Pd bonds. Conversely, phosphine-free catalyst bis(dibenzylideneacetone)palladium(0) uncovers metal-carbene reactivity, and dimerisation and strained alkene cyclopropanation reactions are observed. The nature of the palladium catalyst controls the reactivity of the carbenoid species. Finally, bis(cyclooctadienerhodium(I) chloride) catalytically activates the alkenylstannane moiety, leaving the allylic acetate leaving group available for further transformations. On the other hand, gem-disubstituted trifluoromethanesulfonyloxy- and iodopalladio(II)/ dialkylaluminoneopentane species are generated by intramolecular migratory insertion of 2,2-disubstituted-1-butenyldialkylalanes with σ-arylpalladium(II) triflate and iodide intermediates. Using excess Lewis-basic 1,4-diazabicyclo[2.2.2]octane, electron-rich tris(para-methoxyphenyl)phosphine ligand and acetonitrile as solvent, tandem arylation/1,2-alkyl migration from aluminum to carbon affords 7-substituted-1-ethyl-1-methylindanes containing an all-carbon quaternary stereogenic centre in good yields. This reaction is tolerant of 6-aryl methyl ethers, thioethers and trimethylsilanes. Deuterium labeling established that protiodealumination of the key neopentyl(methyl)aluminum triflate intermediate is caused by the acetonitrile solvent. The organodimetallic species in that study were shown to be configurationally stable, hence the stereospecificity of the process that proceeds via carbopalladation, transmetalation and reductive elimination of an alkylpalladium(II) intermediate. When applied to 1-naphthyl triflate-tethered vinylalanes, the same reaction conditions mediate stereospecific 1,2-diarylation, leading to 2,3,3a,4-tetrahydro-1H-cyclopenta[def]phenanthrenes in excellent yields. The influence of DABCO, tether length and solvent polarity was studied. Selective tandem arylation/1,2-methyl migration could also be achieved in non-polar solvent in absence of Lewis base. While steric properties took precedence over electronic considerations when inducing product selection, preagostic C-H···Pd interactions were postulated to facilitate 1,3-metal migration in the production of 1H-cyclopenta[def]phenanthrene derivatives.

In this thesis, I have investigated gas phase infrared spectroscopy of environmentally as well as astrophysical important large organic molecules such as naphthalene, methy-lated naphthalene, fluorine, methyalted fluorine etc. which are commonly known as polycyclic aromatic hydrocarbons (PAHs). Depending upon the molecular weight these organic molecules can exist both in gaseous as well as in the particulate state at room temperature hence they are the major environmental pollutants. They are also responsible for the unidentified infrared emission bands in the interstellar medium. Chapter 1 provides a brief introduction to my thesis work. A detailed literature survey on the importance, abundance of the PAHs in the environment as well as various spectroscopic techniques useful for identifying the PAHs has been done. Since the objective of my thesis work is to assign the observed fundamental infrared bands of large organic molecules with the help of high level quantum mechanical calculations, a brief introduction to the various high level quantum mechanical techniques that I have used in assigning the bands have been described in this chapter. In Chapter 2 I have presented the experimental and the theoretical methodologies in details. The chapter begins with a detailed description of the experimental procedure used for recording the infrared spectrum of these molecules followed by the theoretical methodologies used for the assignment of the observed infrared bands as well as for identifying the Fermi resonances. In Chapters 3 and 4, of this thesis I have recorded infrared spectrum of 1-and 2-methylnaphthalene (1-and 2-MN), fluorine (FL), 1-methylfluorene (1-MFL) and 1,8-dimethylfluorene (1,8-DMF) in the gas phase. The observed bands were assigned with the help of scaled harmonic frequency, scaled quantum mechanical harmonic force field (SQMFF) and enharmonic frequency calculations. The first two methods are based on the harmonic approximation, whereas the enharmonic frequency calculation is based on the standard second order perturbation theory. All these calculations gave me a partial fit to the fundamental bands in both aromatic and aliphatic C-H stretching as well as in the non C-H stretching region. At the end of both the chapters an error analysis in fitting the spectrum from all the three different calculations have been presented. Evidently the non linear least square fitting method employed in SQMFF calculation gives much better agreement between the experiment and theory than the other two methods. It has been observed in the experimental spectrum of methylated naphthalene that the band structure near the C-H stretch around 3000 cm−1 is very complicated and many bands and shoulders remain unassigned by the methods described in Chapters 3 and 4. Fermi resonance is one of the potential reason for the complicated band structure in this region. In Chapter 5, I have taken naphthalene and have investigated the Fermi resonance around the C-H stretching region using an effective vibrational hamiltonian (EVH) approach. In this method I have constructed an EVH consisting of 8 C-H stretches and 8 H-C-C in-plane bend overtones and 28 H-C-C in-plane bend combination modes as the basis. Both type 1 (stretch overtone) and type 2 (stretch combination) Fermi resonances were investigated. Calculated frequencies belonging to B1u and B2u irreducible representation were compared with the observed bands. Many bands and shoulders have been assigned as the overtone and combination modes of low frequency H-C-C bend motion obtained from the EVH approach. How-ever some bands remain unassigned in this method. This is perhaps due to the neglect of the carbon framework motion in the construction of the EVH. To improve upon the results obtained from the EVH formalism I included the carbon frame degrees of freedom and have carried out a full variation treatment in curvilinear coordinates. I have considered the 8 C-H stretches and 8 H-C-C in-plane bends of naphthalene as local mode oscillators and 17 coordinates belonging to the carbon framework motion as curvilinear normal mode oscillators. A quartic hamiltonian in a mixed local mode -normal mode basis was constructed including up to three body terms in both kinetic and potential energy part. The hamiltonian was subsequently recast into the ladder operator form and diagonal zed in a symmetry adapted basis with polyad constraints. Frequencies so obtained were compared to the experiment All these findings have been presented in Chapter 6 of this thesis. The concluding remark of the thesis and the future direction is presented in Chapter 7

Le développement de plans synthétiques de molécules de complexité variable qui utilise des réactifs aisés d’accès et qui sont économes en atomes et en étapes est constamment au cœur des préoccupations du chimiste organicien pour accroître la diversité moléculaire de façon efficace et éco-responsable. La catalyse par les métaux de transition a permis de faire des progrès considérables dans la construction et la fonctionnalisation combinées d’hétérocycles d’intérêt à valeur ajoutée dans les sciences des produits naturels et les industries pharmaceutiques et phytosanitaires. Le principe synthétique consiste en l’enchaînement de processus standards élémentaires de transformations chimiques en un seul pot au sein de la sphère catalytique métallique. Un axe de progrès contemporain repose en particulier sur l’incorporation de processus de métallation catalytique de liaisons C-CO2H et C-H. Les travaux de thèse s’inscrivent dans ce jeune domaine de recherche initié au cours de la dernière décennie par plusieurs équipes de recherche dont celle de Jieping Zhu de l’école polytechnique fédérale de Lausanne compte parmi les pionnières et les plus actives. Ils ont visé notamment à implémenter consécutivement aux processus standards de carbopalladation intramoléculaire d’ortho-halogéno allénamides de Grigg de construction d’hétérocycles azotés très variés, d’une part des réactions d’allylation directe de la liaison C-H d’hétérocycles et d’énamides et d’autre part d’allylation décarboxylante d’acides propioliques. Après avoir évalué la réactivité des complexes pi-allypalladium conjugués à un atome d’azote dans la réaction, l’allylation directe de la laison C-H d’oxadiazoles et de 1,3-diazoles à fort caractère acide ainsi que des énamides, des séquences originales de construction et d’hétéroarylation combinées pallado-catalysées d’isoquinolinones et d’indoles ont été établies. Un protocole séquencé conduit en un seul pot et basé sur la génération in situ des allénamides, qui ne sont plus isolées, suivie de la réaction de construction et d’hétéroarylation combinées pallado-catalysée a ensuite été mis au point. Il a été exploité pour la préparation d’indoles, 1(2H)-isoquinoléïnones, isoquinoléïnes mais également des hétérocycles de taille supérieure, benzo-(2H)-azépine et benzo-(2H)-azocine intégrant des oxadiazoles et oxa(thia)zoles. Une première étude d’extension du concept synthétique a finalement été ciblée sur la construction et la propargylation combinée de la large gamme d’hétérocycles azotés obtenus précédemment en utilisant les acides propioliques comme partenaire de couplage. / The design of efficient and eco-friendly atom and step-economical synthetic plans of molecules using highly available starting materials is one of major objectives of organic chemist. Transition metal catalysis has allowed a bold step to build and functionalize consecutively, through a one-pot reaction, major nitrogen-containing heterocycles which are broadly present into numerous natural products, pharmaceutics and agrochemicals. The catalysis is based upon tandem inner-sphere elemental chemical transformations and one of major current challenge is to implement catalytic metallation of C-CO2H and C-H bonds. Involved in this young field of research initiated since the past decade from sevaral groups including pioneering and high active Jieping Zhu team of the Polytechnic School of Lausanne, the present study has been directed towards the design of innovative palladium-catalyzed domino Grigg nitrogen-containing heterocycles building through ortho-halogeno allenamides intramolecular carbopalladation process followed by direct C-H allylation of heterocycles and enamides or direct decarboxylative allylation of propiolic acids. After demonstrating the reactivity of nitrogen-conjugated pi-allypalladium complex in direct C-H allylation of acidic heterocycles, first palladium-catalyzed tandem build and heteroarylation of 1(2H)-isoquinoleinone and indole from ortho-halogeno allenamides was first envisaged. Efforts were next directed to the setting up of a one-pot protocol including in situ generation of allenamide followed by palladium-catalyzed domino building and functionalization of heterocycles. It was then hugely evaluated to the preparation of indole, 1(2H)-isoquinoleinones, isoquinolins as well as high-membred ring heterocycles such as benzo-(2H)-azepine and benzo-(2H)-azocine embedding with oxadiazoles and oxa(thia)zoles. An first extended synthetic concept towards the palladium-catalyzed tandem build and propargylation of nitrogen-containing heterocycles using sevral propiolic acids as coupling partners.

No description available.

京都大学 / 0048 / 新制・課程博士 / 博士(薬科学) / 甲第18914号 / 薬科博第28号 / 新制||薬||4(附属図書館) / 31865 / 京都大学大学院薬学研究科薬科学専攻 / (主査)教授 高須 清誠, 教授 竹本 佳司, 教授 川端 猛夫 / 学位規則第4条第1項該当 / Doctor of Pharmaceutical Sciences / Kyoto University / DFAM

No description available.

京都大学 / 新制・課程博士 / 博士(薬科学) / 甲第24556号 / 薬科博第173号 / 新制||薬科||19(附属図書館) / 京都大学大学院薬学研究科医薬創成情報科学専攻 / (主査)教授 大野 浩章, 教授 高須 清誠, 教授 大宮 寛久 / 学位規則第4条第1項該当 / Doctor of Pharmaceutical Sciences / Kyoto University / DFAM