Spelling suggestions: "subject:"anetwork"" "subject:"andnetwork""
1 |
Desenvolvimento de um modelo de mapa de consumo de combustível baseado em aquisição embarcadas. / Development of an internal combustion engine fuel map model based on on-board acquisition.Steckelberg, Danilo Brito 01 November 2016 (has links)
É apresentada uma metodologia para descrever o mapa de desempenho (ou mapa de consumo de combustível) de um motor de combustão interna como função de suas condições de operação (rotação e torque) baseados em medições embarcadas. É utilizada para este levantamento a combinação de medições via GPS (para a velocidade longitudinal e inclinação de pista) e OBD-II para aquisição de sinais da rede CAN, como rotação do motor e consumo de combustível. É desenvolvida uma metodologia para o cálculo do torque líquido do motor baseado na medição de velocidade e aceleração longitudinal do veículo com uma margem de incerteza de 2% a 5% no cálculo do torque em condições normais de operações. É realizado um detalhamento da origem das incertezas para avaliar a contribuição individual de cada parâmetro. Um modelo de regressão polinomial é utilizado para descrever o mapa de consume de combustível do motor cujos coeficientes característicos são determinados experimentalmente através da metodologia proposta para cinco veículos diferentes a fim de comprovar a eficácia da metodologia. Os coeficientes de correlação variam de 0.797 a 0.997, sendo que em três de cinco veículos o coeficiente de correlação é maior que 0.910, comprovando a robustez da metodologia. / It is presented a methodology to describe the engine performance map (or the engine fuel map) for an internal combustion engine as a function of its operating conditions (engine speed and torque) based on on-board measurements. It is used a combination of GPS measurements for vehicle speed and road grade together with a OBD-II acquisition system in order to acquire information provided by CAN network, such as engine speed and fuel consumption. A methodology to calculate the engine torque based on speed and acceleration measurements is shown with an average uncertainty in the range of 2% to 5% for torque calculation in normal operating conditions. It is presented a detailed breakdown of the contribution of individual parameters in torque calculation uncertainty. A polynomial regression model to describe the engine fuel map is presented and the coefficients for this model is calculated based on on-road measurements for 5 different vehicles to prove the accuracy of the proposed methodology. The correlation coefficients obtained for these measurements are within the range of 0.797 to 0.997 and three out of five vehicles with correlation coefficient higher than 0.910, proving the methodology robust.
|
2 |
Desenvolvimento de um modelo de mapa de consumo de combustível baseado em aquisição embarcadas. / Development of an internal combustion engine fuel map model based on on-board acquisition.Danilo Brito Steckelberg 01 November 2016 (has links)
É apresentada uma metodologia para descrever o mapa de desempenho (ou mapa de consumo de combustível) de um motor de combustão interna como função de suas condições de operação (rotação e torque) baseados em medições embarcadas. É utilizada para este levantamento a combinação de medições via GPS (para a velocidade longitudinal e inclinação de pista) e OBD-II para aquisição de sinais da rede CAN, como rotação do motor e consumo de combustível. É desenvolvida uma metodologia para o cálculo do torque líquido do motor baseado na medição de velocidade e aceleração longitudinal do veículo com uma margem de incerteza de 2% a 5% no cálculo do torque em condições normais de operações. É realizado um detalhamento da origem das incertezas para avaliar a contribuição individual de cada parâmetro. Um modelo de regressão polinomial é utilizado para descrever o mapa de consume de combustível do motor cujos coeficientes característicos são determinados experimentalmente através da metodologia proposta para cinco veículos diferentes a fim de comprovar a eficácia da metodologia. Os coeficientes de correlação variam de 0.797 a 0.997, sendo que em três de cinco veículos o coeficiente de correlação é maior que 0.910, comprovando a robustez da metodologia. / It is presented a methodology to describe the engine performance map (or the engine fuel map) for an internal combustion engine as a function of its operating conditions (engine speed and torque) based on on-board measurements. It is used a combination of GPS measurements for vehicle speed and road grade together with a OBD-II acquisition system in order to acquire information provided by CAN network, such as engine speed and fuel consumption. A methodology to calculate the engine torque based on speed and acceleration measurements is shown with an average uncertainty in the range of 2% to 5% for torque calculation in normal operating conditions. It is presented a detailed breakdown of the contribution of individual parameters in torque calculation uncertainty. A polynomial regression model to describe the engine fuel map is presented and the coefficients for this model is calculated based on on-road measurements for 5 different vehicles to prove the accuracy of the proposed methodology. The correlation coefficients obtained for these measurements are within the range of 0.797 to 0.997 and three out of five vehicles with correlation coefficient higher than 0.910, proving the methodology robust.
|
3 |
Vérification des contraintes temporelles de bout-en-bout dans le contexte AutoSar / Verification of end-to-end real-time constraints in the context of AutoSarMonot, Aurélien 26 October 2012 (has links)
Les systèmes électroniques embarqués dans les véhicules ont une complexité sans cesse croissante. Cependant, il est crucial d'en maîtriser le comportement temporel afin de garantir la sécurité ainsi que le confort des passagers. La vérification des contraintes temporelles de bout-en-bout est donc un enjeu majeur lors de la conception d'un véhicule. Dans le contexte de l'architecture logicielle AUTOSAR standard dans les véhicules, nous décomposons la vérification d'une contrainte de bout-en-bout en sous-problèmes d'ordonnancement sur les calculateurs et sur les réseaux de communication que nous traitons ensuite séparément. Dans un premier temps, nous présentons une approche permettant d'améliorer l'utilisation des calculateurs exécutant un grand nombre de composants logiciels, compatible avec l'introduction progressive des plateformes multi-coeurs. Nous décrivons des algorithmes rapides et efficaces pour lisser la charge périodique sur les calculateurs multi-coeurs en adaptant puis en améliorant une approche existant pour les bus CAN. Nous donnons également des résultats théoriques sur l'efficacité des algorithmes dans certains cas particuliers. Enfin, nous décrivons les possibilités d'utilisation de ces algorithmes en fonction des autres tâches exécutées sur le calculateur. La suite des travaux est consacrée à l'étude des distributions de temps de réponse des messages transmis sur les bus CAN. Dans un premier temps nous présentons une approche de simulation basée sur la modélisation des dérives d'horloges des calculateurs communicant sur le réseau. Nous montrons que nous obtenons des distributions de temps de réponse similaires en réalisant une longue simulation avec des dérives d'horloge ou en faisant un grand nombre de courtes simulations sans dérives d'horloge. Nous présentons enfin une technique analytique pour évaluer les distributions de temps de réponse des trames CAN. Nous présentons différents paramètres d'approximation permettant de réduire le nombre très important de calculs à effectuer en limitant la perte de précision. Enfin, nous comparons expérimentalement les résultats obtenus par analyse et simulation et décrivons les avantages et inconvénients respectifs de ces approches / The complexity of electronic embedded systems in cars is continuously growing. Hence, mastering the temporal behavior of such systems is paramount in order to ensure the safety and comfort of the passengers. As a consequence, the verification of end-to-end real-time constraints is a major challenge during the design phase of a car. The AUTOSAR software architecture drives us to address the verification of end-to-end real-time constraints as two independent scheduling problems respectively for electronic control units and communication buses. First, we introduce an approach, which optimizes the utilization of controllers scheduling numerous software components that is compatible with the upcoming multicore architectures. We describe fast and efficient algorithms in order to balance the periodic load over time on multicore controllers by adapting and improving an existing approach used for the CAN networks. We provide theoretical result on the efficiency of the algorithms in some specific cases. Moreover, we describe how to use these algorithms in conjunction with other tasks scheduled on the controller. The remaining part of this research work addresses the problem of obtaining the response time distributions of the messages sent on a CAN network. First, we present a simulation approach based on the modelisation of clock drifts on the communicating nodes connected on the CAN network. We show that we obtain similar results with a single simulation using our approach in comparison with the legacy approach consisting in numerous short simulation runs without clock drifts. Then, we present an analytical approach in order to compute the response time distributions of the CAN frames. We introduce several approximation parameters to cope with the very high computational complexity of this approach while limiting the loss of accuracy. Finally, we compare experimentally the simulation and analytical approaches in order to discuss the relative advantages of each of the two approaches
|
4 |
Measurement methodologies for controlling automotive radars in EMC chambersSöderberg, Ludwig January 2017 (has links)
Autonomous cars are developing in a rapid speed, which means that the advanced driver-assistance systems must be tested carefully. Radar is one of many tools the car can use to detect obstacles and targets in front of the car. This bachelor thesis deals with programming and testing of an FMCW radar. The radar used in this thesis is an Continental ARS 308-2C/21 HS/AO, and the programming is written in Visual Basic. The goal within this project was to write a program for the Continental radar, and then measure static objects. The radar and the written program will be used in the research project, "HiFi Radar Target". The radar module will also be implemented in the new EMC chamber, AWITAR, which is currently under construction. The radar sweeps in the frequency band 77GHz, which is a standard frequency in the automotive industry. Communication with the computer is done via a CAN-network. Function tests have been performed on Astazero and gave satisfactory results.The thesis work has been carried out at RISE in Borås. / Idag är självkörande bilar på kraftig frammarsch, detta medför att hjälpsystemen måste testas noga. Radar är ett av många hjälpmedel bilen kan använda för att detektera hinder framför bilen. Detta examensarbete avhandlar programering och testning av en FMCW radar. Radarn som används är en Continental ARS 308-2C/21 HS/AO, programeringen är skriven i Visual Basic. Målet med detta examensarbeta var att få radarn att fungera, för att sedan kunna mäta på statinära objekt. Radarn och det skrivna programmet kommer att användas inom forskningsprojektet, "HiFi Radar Target". Radarmodulen kommer även att implementeras i den nya EMC-kammaren, AWITAR som just nu är under konstruktion. Radarn sweper i freqvensbandet 77GHz, vilket är en standardfreqvens för bilindustrin. All kommunikation med radarn och datorn sker via ett CAN-nätverk. Funktionstesterna har utförts på Astazero och gav tillfredställande resultat. Examensarbetet är utfört på RISE i Borås.
|
5 |
Návrh zařízení pro demonstraci a testování produktu NCV7471 / Design of module for demonstration and testing of system basis chips NCV7471Kresta, Martin January 2013 (has links)
Práce se zabývá návrhem automobilové elektronické řídicí jednotky (ECU) s funkcí partial networking definovanou normou ISO 11898-6. Cílem je navrhnout a vytvořit demonstrační ECU s použitím system basis chip NCV7471. Protože NCV7471 obsahuje standardní CAN transceiver, funkce partial networking je realizována pouze softwarem řídicí jednotky. Práce zvažuje možné způsoby realizace jak HW, tak SW části, tak aby byla zajištěna nízká spotřeba ECU v různých operačních módech, a snaží se sledovat současné trendy v automobilovém průmyslu.
|
Page generated in 0.0328 seconds