The topic of this diploma thesis was to design a winery house in the open landscape in a traditional wine landscape of Mikulov. The designed building serves as a four stars hotel with apartment rooms, restaurant, wellness, wine shop and a small wine farm with a storage of wine. There are unique views to the Mikulov city, Turold hill and surounding vineyards. The longitudinal axe is oriented on northeast–southwest. Majority of rooms, terraces and both atriums are directed on prospective axes. The object has one basement and three groundfloors. It is (situated) into the sloping terrain and constrasts with the wavy landscape of Mikulov for its racional and linear conception. It is inspired by terracced formations in near suroundings and uses it for its mass as well. It creates a new landscape dominant that remainds the geological formation of limestone situated in the surroundings of the Mikulov city. The regular rhytm of windows on facade refers to the Mikulov´s renaissance. The regular placement of window openings, and their rhythm are inspirated by Mikulov renaissance. Smaller holes, glass surfaces, light color of facade, green roof and shielding elements prevent from overheating the object during the summer. The water element in the courtyard offers pleasant refreshment for the visitors.

Subject of master's thesis is project of health centre in Brno. The building is constructed as a frame of reinforced concrete with four above-ground floors. The building is based on square individual footing and uncased piles. Building envelopes consists of supporting part and thermally isulated part. Supporting part is made of earated concrete block Ytong. Thermally isulated part is made of thermal insulation polystyrene and Kingspan panel facade cladding. Building is roofed with vegetative promenade flat roof with 3-meters-high trees. Part of master's thesis is also a static desing of reinforced concrete components, fire-safety solving and thermal-technical evaluation og building.

Diploma thesis solves the creating of layout study and creation of documentation for the realization new fire station. In the object is contemplated with placement of regional fire brigade unit, category JPO I and volunteer firefighter unit of city together, category JPO III/1. Fire station category will be considered as P1. The object consists of two structurally and functionally different parts. The first part is made of ceramic masonry with external thermal insulation composite system. Here are located administrative and operational premises. This section has two floors. Second part is solved as single-storey skeletal system made of reinforced concrete, roofed by prestressed concrete trusses. This part contains technical facilities and a garage. The cladding of the skeletal part of building is designed by using sandwich facade panels. Object has dissected ground plan, maximum dimensions are 54,80x22,20 m. Building has no basement and is roofed by flat roofs only. Object is located in peripheral locality of the city Jaroměř. Surrounding terrain is flat. Solved area contains a few related objects.

The content of this thesis is the construction technology project construction hall for the production of veterinary drugs Tekro in the village Nová Dedina. In this work addresses the project site equipment, scheduling, technical regulations, inspection and test plan, a study of the main technological stages of the building.

The topic of my thesis is an architectural study of a multifunctional residental building located at Svitava river bank which is surrounded by streets named Masna, Krenova and Hladikova. The objective of the study is to design a building that would utilize the space effectively and restore its function. As a result of the study, my project is divided into three compounds with the inner being a semi-public space, linked to its sruroundings by many passages and two main boulevards. The three combounds are composed of one administration block which is four storeys and the other two compounds are five storeys high, with the ground and first floors being different facilities e.g. kindergarden, restaurant, bank ,café, clinics, library, gallery, shops and a senior center. From the third to the fifth floor there are designated housing apartments comprising of small economic flats. The building has a two-floor basement, with a supermarket, technical facilities and parking. The construction of the building is from monolithic reinforced concrete frame, with the horizontal structure composed of beamless slabs. The facade is designed by using a combination of two materials i.e. white plaster and timber cladding as horizontal panels.

In my diploma´s thesis I occupy with selected parts of the technological prepariation of building proceses of administrative and production hall in Holešov. There are detailed follow up the technological rules for ground work and foundation. Furthermore , the technological requirements for reinforced concrate assembled skeleton. My diploma´s thesis also includes the project of the construction site facilities, machinery, construction budget, the technology solution including CTP, the time and financial planning, noise studies, fire safety of the building, evaluation of roof cladding.

The content of this work is the implementation of the construction technological project of central bearing warehouse ZKL in Brno. The building serves for storage purposes predominantly. This thesis contains general information about construction, content construction technological project, technology report of storage and residential proposal of mechanical assembly, technological prescription for prefabricated scaffold and cladding panels construction Kingspan, report of healthand safety on the construction site, technology report description transportation, inspection and test plans and environmental plan. Budget and time schedule of the main object, calculation, time and financial plan of whole building is contained in supplements. In pursuance of second task, the thesis compares financial and time point of view of two technologies of making stairways.

The solution of this Diploma thesis is a construction technological project of multipurpose sports hall Kojetín. It contains a comprehensive section for the implementation of this structure. Work in this technological project is included the following elements: inspection and test plan, technological standard, technical reports, the financial plan, the timetable, principles of organization development, budget, maintenance and service life, energy label of the building envelope.

This master´s thesis analyzes an effect of wind load on the ventilated facade claddings. The analysis is performed on the various types of facades, from unventilated to ventilated facades with a different geometrical arrangement of facade shell. The theoretical part describes the basic knowledge about the theory of flow, turbulence modeling, determining an optimal domain, verification of the calculation model and user interface in the ANSYS software. The final part compares the value of the wind load reduction depending on the change of the gap widths and the size of ventilated spaces. The resulting values are obtained by CFD simulations. The thesis includes a design and an assessment of the steel hall construction.

Un acier austénitique stabilisé au titane, le 15-15Ti AIM1, a été choisi à l'état écroui comme matériau de référence des gaines de combustible du premier coeur d'ASTRID (prototype de Réacteur à Neutrons Rapides (RNR) refroidi au sodium). Cette étude contribue à la compréhension de l'évolution microstructurale sous irradiation de l'AIM1 à forte dose (>100 dpa) et en particulier des mécanismes de gonflement. Des campagnes d'irradiations aux ions de l'AIM1 et de son précurseur le 15-15Ti D4 (AIM1 sans phosphore), ont été menées sur l'installation Jannus-Saclay. Ces irradiations ont été réalisées jusqu'à une dose de 150 dpa en simple faisceau Fe2+ et 120 dpa en double faisceaux Fe2+ et He+ entre 550 et 630°C pour étudier les effets de l'hélium. En parallèle, des recuits thermiques à 650°C de durées comparables aux temps d'irradiation (<100h) ont été réalisés pour séparer les effets de la température et de l'irradiation. Les microstructures et les défauts d'irradiation ont été caractérisés principalement au microscope électronique à transmission (MET) et à la sonde atomique tomographique (SAT). Pendant les recuits thermiques à 650°C, une précipitation rapide de carbures de titane nanométriques sur les dislocations est observée. Une faible densité d'amas enrichis en phosphore (germes de phosphures) a également été détectée. Après irradiation aux ions, la microstructure de l'AIM1 et du 15-15Ti fait apparaître une population dense de boucles fautées de Frank reparties de manière homogène et qui évolue peu avec la dose (entre 45 et 150 dpa). La précipitation est constituée principalement de carbures de titane nanométriques, de phosphures (dans l'AIM1) et de carbures de chrome. La précipitation de phosphures dans l'AIM1 apparait accélérée par l'irradiation. Une ségrégation du Ni et du Si sur les dislocations est aussi mise en évidence. Les irradiations en simple faisceau même à 150 dpa créent une faible densité de cavités réparties de façon hétérogène dans les grains. Il a été montré que l'implantation simultanée d'hélium à 1 appm/dpa conduit à une densité de cavités nettement plus élevée. Dans ce cas, une association entre les cavités et les nanoprécipités (TiC et phosphures) est observée. Enfin une première comparaison entre les irradiations aux ions et aux neutrons sur le 15-15Ti D4 souligne de notables différences dans l'évolution de la précipitation et les mécanismes de formation des cavités. Un modèle de dynamique d'amas avec le code Crescendo permet de modéliser la formation des boucles de Frank, des cavités et l'évolution du réseau de dislocations et prend en compte la production d'hélium. Les paramètres du modèle ont été ajustés pour reproduire les données expérimentales des irradiations en simple faisceau à 630°C. L'extrapolation du modèle illustre le décalage du pic de gonflement vers les basses températures quand le taux de dommage diminue. Le modèle prenant en compte la présence de l'hélium reproduit l'augmentation de la densité de cavités observée en double faisceaux Fe-He / A cold-worked titanium stabilized austenitic steel, named 15-15Ti AIM1, is the reference material for fuel cladding to be used in the _rst core of ASTRID (prototype of Sodium cooled Fast neutron Reactor -SFR). This study contributes to the understanding of the microstructural evolution under high dose irradiation of AIM1 (> 100 dpa) and especially swelling mechanisms. Several ion irradiations of AIM1 and its precursor 15-15Ti D4 (AIM1 without phosphorus), were done at Jannus-Saclay facility. These irradiations were performed up to 150 dpa in single beam (Fe 2+) and up to 120 dpa in dual beams (Fe 2+ and He +) at a temperature set between 550 and 630 ° C in order to study the helium e_ects. Besides, thermal annealing at 650 ° Cequivalent to irradiation time (<100h) was carried out to separate the effects of temperature and irradiation. The microstructures and the irradiation-induced defects were characterized mainly by the transmission electron microscopy (TEM) and tomographic atom probe (SAT). During thermal annealing at 650 ° C, rapid precipitation of nanometric titanium carbides over dislocations was observed. A low density of phosphorus-enriched clusters (phosphide nucleation) was also detected. After irradiation with ions, the microstructure of AIM1 and 15-15Ti revealed high density of Frank faulted-loops distributed homogeneously and which didn'tevolve with the irradiation dose (between 45 and 150 dpa). The precipitation of nanometric titanium carbides, phosphides (in AIM1) and chromium carbides was observed. Precipitation of phosphides in AIM1 is accelerated by irradiation. Irradiation_induced segregation of Ni and Si on dislocations has also been highlighted. Single-beam irradiations even at 150 dpa show very low cavities density distributed heterogeneously in the grains. It is shown that the simultaneous injection of 1 appm / dpa helium leads to much higher cavity density. In this case, cavities are attached to nanoprecipitates (TiC and phosphides). Finally, a comparison between ion and neutron irradiation on 15-15Ti D4 highlighted significant differences in the evolution of precipitation and cavity formation mechanisms. A cluster dynamics model with the Crescendo code was used to simulate the formation of Frank loops, cavities and the evolution of the dislocation network, taking into account the helium production. The model parameters were adjusted to reproduce the experimental single beam irradiation data at 630°C. The extrapolation of the model shows the displacement of the swelling peak at low temperatures as the rate of damage decreases. Taking into account the presence of Helium, the model reproduces the increase of cavity density observed in double Fe-He beams.