Le cancer représente l'un des problèmes majeurs en santé publique. Jusqu'à présent, en parallèle de l'intervention chirurgical, plusieurs traitements ont été mis au point et largement utilisés en thérapie clinique telles que les chimiothérapies. Cependant, leur efficacité est parfois limitée et couplée à des effets secondaires très néfastes, laissant les patients dans une impasse thérapeutique. Par conséquent, de nouvelles approches thérapeutiques doivent être développées sur de nouvelles cibles avérées en oncologie afin d'apporter des soins personnalisés aux patients. La première partie de mon travail de thèse a été dédiée à la compréhension des mécanismes moléculaires de la nucléotidase cytosolique de type II (cN-II), une enzyme du métabolisme des purines dont l'implication dans des phénomènes de résistance à des traitements anticancéreux a pu être démontrée. Aussi, une étude sur la cinétique enzymatique à l'état pré-stationnaire et stationnaire a été entreprise sur la forme sauvage et une forme mutée de l'enzyme lui conférant une activité accrue fortement impliquée dans les cas de résistance. Par cette approche, il a été possible de décortiquer le mécanisme cinétique, de définir l'étape cinétiquement limitant afin d'identifier les intermédiaires prépondérants de la réaction pouvant être ciblés pour le développement de nouveaux inhibiteurs. Cette étude cinétique est présentée dans ce premier volet de la thèse. En second lieu, mon travail s'est focalisée sur un second membre de cette famille d'enzyme qui est l'ecto-5'-nucléotidase (CD73). Cette enzyme exprimée sous forme dimérique à la surface extracellulaire régule la concentration en adénosine extracellulaire (par hydrolyse de l'adénosine monophosphate), ce dernier étant un puissant immunosuppresseur de la réponse immune anticancéreuse. L'objectif de mon travail de thèse a été de développer de nouveaux inhibiteurs de type allostérique en utilisant une approche basée sur la structure tridimensionnelle et la dynamique moléculaire. Une des étapes clés a été tout d'abord de mettre au point un système expression hétérologue afin d'obtenir l'enzyme recombinante en quantité suffisante pour les études enzymatiques ultérieures. Différents systèmes d'expression ont été testés et seul le système en cellules d'insecte infectées par le baculovirus a permis d'obtenir l'enzyme active en grande quantité. En parallèle, une étude in silico a permis de reproduire la dynamique fonctionnelle de l'enzyme requise pour sa fonction. A partir de ses données, un criblage virtuel d'une chimiothèque de 324 000 molécules a été réalisé sur le site de dimérisation et a permis d'identifier 33 composés chefs de files. Parmi, ces composés, dix molécules se sont avérés être de puissants inhibiteurs de CD73 (Ki < 1 µM) avec un mécanisme d'inhibition de type allostérique ou non-compétitif. La cytotoxicité des composés a été évaluée sur des lignées cellulaires transformées ou tumorales montrant un effet uniquement à des concentrations très élevées (supérieures à 100 µM). L'étude des relations structure-fonction devrait permettre à présent de proposer de voies d'optimisation afin d'améliorer l'efficacité des composés les plus actifs afin d'aboutir à de nouveaux candidats médicaments. / Cancer burden still remains a major worldwide health problem. To date, several types of conventional anticancer treatments are widely used in clinical. However, the alternative effects of these treatments often leave patients impaired. Therefore, it is required to understand the unique medical needs of individual patients and to conduct effective, high–quality research focusing on the not yet identified oncotargets.The first part of my thesis is dedicated to decipher molecular basis of cN-II reaction. This study characterizes the steady state and transient state kinetics of cN-II wild type and hyperactive mutant which involved in cancer treatment resistance. Furthermore, the characterization of the rate-limiting step and reaction intermediates gave insights into the binding mechanisms and the development of small molecules inhibitors of cN-II.In the second part of this work, we aimed to investigate allosteric inhibitors of CD73 using structure-based drug design approach. In this study the suitable protein expression system was established for the production of sufficient quantities of fully active CD73. This work followed by in silico studies, including molecular dynamics, virtual screening, and hits identification and in vitro hits validations and kinetics characterizations. The cytotoxicity of the most powerful inhibitors exhibited on different cell types was determined. SAR studies gave insights into the binding mode of best compounds and function.

No description available.

M. Tech (Department of Chemistry, Faculty of Applied and Computer Sciences), Vaal University of Technology. / Activated carbons have been produced from various carbonaceous source materials including nutshells, peat, wood, coir, lignite, coal and petroleum pitch and the produced carbons have been used for adsorption of inorganic and organic compounds from numerous matrices. Activated carbons are characterized by large surface area and high degree of microporosity. The ability of activated carbon to adsorb gold from solutions, which is present in very low concentrations while loading to fairly high concentrations, has made it an attractive material for the concentration of gold from dilute solutions. Consequently, the use of activated carbons for the recovery of gold from cyanide-leached liquors has gained wide acceptance in the mining industry. However, the price of commercially prepared carbons, the time taken for them to arrive, the breakage of the carbon during transportation and the interest in utilization of various local wastes for the generation of adsorbents has led to a search of more cost effective and time friendly source for the activated carbons. The focus of this research was to conduct a study in which a comparison was conducted between untreated coconut shell derived activated carbon (CAC) and Macadamia nutshell derived activated carbon (MAC) for the adsorption of gold. These activated carbons were modified with HNO3 and H3PO4 to increase their surface adsorption properties. This was done in order to explore if these activated carbons prepared from Macadamia shells could be an attractive alternative or a complementary supplement to the coconut shell based carbons that are currently being used in the gold extraction industry. The modification of the commercially prepared Macadamia activated carbons was done with 3 different concentrations for both nitric acid and phosphoric acid. The modified activated carbons were labelled MACP20%, MACP40% and MACP60%, to signify the materials prepared from 20% (v/v) H3PO4, 40% (v/v) H3PO4 and 60% (v/v) H3PO4 , respectively . Same labelling was used for 20% (v/v) HNO3, 40% (v/v) HNO3 and 55% (v/v) HNO3 modifications to correspond to MACN20%, MACN40% and MACN55%, respectively. Also, untreated coconut shell derived activated carbon (CAC) and Macadamia nutshell derived activated carbon (MAC) were investigated for gold adsorption for comparison purposes. All the activated carbons prepared in the iii | P a g e study were characterized with Brunauer-Emmet-Teller (BET), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Thermo gravimetric analysis (TGA), elemental analysis (EL) and X-ray diffraction spectroscopy (XRD). The physical properties of the activated carbons were done by determining attrition, ash content, volatile matter, and moisture content of all the activated carbons. Various parameters that affect selective adsorption such as the effect of initial concentration, time, agitation speed, interfering species, and dose of the adsorbent were investigated. Optimal parameters for gold ion adsorption were as follows: solution pH, 10; contact time, 6 h; agitation speed 150 rpm; sorbent amount 4 g and 5.5 ppm for initial concentration of gold. The observed selectivity order was not the same for all the adsorbents but the adsorption of gold was found to be mostly influenced by the presence of nickel and least influenced by copper. The MACP60% was found to be the most effective from the three concentrations investigated for the phosphoric acid modified activated carbons yet proved to have lower adsorption capabilities compared to CAC. The MACN55% was found to be the most efficient and displayed similar adsorption capabilities to those of CAC.

Introduction : L’utilisation des méthodes anatomiques classiques rend difficile la localisationprécise des micro-fibres nerveuses et ne permet pas de déterminer leur nature ni leur fonction.La chirurgie pelvienne est associée à des séquelles urinaires et sexuelles fréquentes causéespar lésion iatrogène des nerfs pelviens. La connaissance de l’anatomie et de la physiologie del’innervation intra-pelvienne est fondamentale pour tenter de réduire le taux de troublesfonctionnels postopératoires.Objectifs : i) étudier l’anatomie topographique et la nature de fibres nerveuses intrapelvienneen utilisant la reconstruction tridimensionnelle des coupes histologiques immunomarquéesii) standardiser la technique de Dissection Anatomique Assistée par Ordinateur(DAAO) et vérifier sa faisabilité sur des sujets adultes et iii) établir grâce à cette technique deDAAO des modèles pédagogiques tridimensionnels afin d’améliorer la compréhension desdysfonctions sphinctériennes et sexuelles survenant après la chirurgie (rectale et prostatique)et d’adapter éventuellement la technique opératoire.Matériel et méthodes : Des coupes histologiques sériées de pelvis ont été réalisées chez septfoetus masculins, sept foetus féminins et six cadavres adultes masculins. Les coupes ont ététraitées par des méthodes histologiques (Hématoxyline-Eosine et trichrome de Masson) etimmuno-histochimiques pour détecter les fibres nerveuses (anti-S100), les fibres somatiques(anti-PMP22), les fibres adrénergiques (anti-TH), cholinergiques (anti-VAChT), sensitives(anti-SP/CGRP) et nitrergiques (anti-nNOS) ainsi que l’actine lisse des sphincters. Les lamesont ensuite été numérisées par un scanner de haute résolution optique et les imagesbidimensionnelles ont été reconstruites en trois dimensions grâce au logiciel WinSurf.Résultats: La reconstruction tri-dimensionnelle des coupes histologiques immuno-marquéesa permis d'identifier l’anatomie topographique et structurelle de l’innervation intra-pelvienne.Les structures nerveuses afférentes du plexus hypogastrique inférieur (PHI) : nerfssplanchniques pelviens (NSP) et nerfs hypogastriques (NH) véhiculent de façon mixte l’influxsympathique et parasympathique pelvien.Les fibres nerveuses issues de la partie distale du PHI sont responsables de la continenceurinaire et de la fonction sexuelle. Elles sont regroupées et associées au pédicule vasculairepour former la bandelette neuro-vasculaire (BNV). Trois efférences principales sont issues decette BNV : i) des fibres antérieures destinées au sphincter urétral, ii) des fibres antérolatérales,par rapport à la prostate et au vagin, constituant le nerf caverneux destiné aux corpscaverneux du pénis/clitoris et iii) des fibres nerveuses postéro-latérales, par rapport à laprostate et au vagin, formant le « nerf spongieux » destiné aux corps spongieux/bulbesvestibulaires.Les communications autonomiques-somatiques entre le PHI supra-lévatorien et le nerfpudendal infra-lévatorien existent à trois niveaux ; proximal, intermédiaire et distal. Lacommunication distale caverno-pudendale est responsable de l’activité érectile segmentaireobservée au sein du nerf dorsal du pénis/clitoris.Conclusion: La DAAO est une méthode originale de recherche anatomique qui a étéprogressivement améliorée au sein de notre unité de recherche. Cette évolution illustre le faitque l'anatomie descriptive est encore une science dynamique. Notre étude a permis dedévelopper des modèles anatomo-physiologiques d’innervation pelvienne contribuant àaméliorer du point de vue morphologique, chirurgical et pédagogique la compréhension derégions anatomiques complexes comme le petit bassin. / Introduction: Classic anatomical methods have limitations in micro determination of nervefibre location. Furthermore, the precise detection of the nerve fibres nature is not possible bymeans of dissection. Pelvic surgery is associated with urinary and sexual consequence causedby iatrogenic damage of the pelvic nerves. Anatomic and physiologic knowledge of the intrapelvicinnervation is essential to reduce the rate of postoperative functional complication.Objectives: i) to study the topographic anatomy and the nature of intra-pelvic nerve fibersusing three-dimensional reconstruction of histological immuno-labeled sections ii)standardize the technique of Computer-Assisted Anatomic Dissection (CAAD) and check itsfeasibility on adult subjects iii) reconstructe three dimensional teaching models to improveunderstanding of urinary and sexual dysfunction occurring after surgery (of rectal and ofprostate) to ameliorate the operative technique.Materials and methods: serial histological sections of pelvic portion were performed inseven male foetuses, seven female foetuses and six adult male cadavers. The sections weretraited by histological methods (Hematoxylin-Eosin and Masson's trichrome) and immunohistochemicalmarker of the nerve fibers (anti-S100), the somatic fibers (anti-PMP22), theadrenergic (anti-TH), cholinergic (anti-VAChT), sensory (anti-SP/CGRP) and nitrergic (antinNOS)fibers and the actin smooth muscles. The slides were then digitized by a scanner ofhigh optical resolution and two-dimensional images were reconstructed in three dimensionsusing WinSurf software.Results: The three dimensional reconstruction of histological immuno-labelled sectionsidentified structural and topographic anatomy of intra-pelvic innervation. The afferencenerves of the inferior hypogastric plexus (IHP): pelvic splanchnic nerves (PSN) andhypogastric nerves (HN) contain both sympathetic and parasympathetic fibers.The nerve fibers from the distal part of the IHP is responsible for urinary continence andsexual function. They are grouped and associated with the vascular pedicle to form theneurovascular bundles (NVB). Efferences of this NVB are distributed in three maindirections: i) anterior fibers the urethral sphincter, ii) anterolateral fibers, compared withprostate / vagina, which constitute the cavernous nerve for the corpora cavernosa of the penis/ clitoris and iii) " spongious nerve”, which is the continuity of posterior-lateral nerve fibers,compared with prostate / vagina, for the corpus spongiosum / vestibular bulbs.Autonomic-somatic communications between supra-lavator IHP and infra-levator pudendalnerve are present at three levels; proximal, intermediate and distal communications. Cavernopudendaldistal communication provides segmental erectile activity of the dorsal nerve of thepenis / clitoris.Conclusion: The CAAD is an original method in anatomical research which has beenprogressively improved. This illustrates the fact that descriptive anatomy is still a dynamicscience. Our study has developed anatomico-physiological models of intra-pelvic innervationcontributing to a better understanding of complex anatomical

>Magister Scientiae - MSc

>Magister Scientiae - MSc / The Kuils River Catchment is an urban river catchment that forms part of the larger Kuils-Eerste River system draining the eastern half of the Cape Metropolitan Authority area and Stellenbosch Municipality. Rapid urbanisation has resulted in the encroachment of residential and industrial areas into the river system through channelization and sewage disposal. This research project intends to assess the quality of surface runoff in the Kuils River catchment and determining non-point source pollutant loading rates in the catchment using GIS-based modelling. The study results show how modelled potential sources of surface runoff and NPS pollutants using desktop GIS analysis tools in a sequential process that involved different levels of software applications could explain the characteristics of the catchment. With the help of the Expected Mean Concentration (EMC) values associated with surface runoff from land use/covers, NPS pollutant loads were assessed downstream towards the Kuils River Catchment outlet using the Nonpoint Source Pollution and Erosion Comparison Tool (N-SPECT) based in ArcGIS. The outputs from this model consist of predicted annual pollutant loading (mg/mvyear) for each Kuils-Eerste River that occurs in the catchment. The results have shown clearly the spatial distribution of sources of particular pollutants in the catchment. Further or advanced processing knowhow with this model might provide far reaching insights into the problem and it is however recommended that these results produced using N-SPECT be compared to those of other hydrologic models using the same inputs.

Introduction Colour codes are used extensively in railways to convey specific information governing movement of trains and equipment on the track. One such task is the railway traffic control display that uses colour coded video display terminals (VDTs) to convey information of the signal status, train movements and track status to the railway dispatcher. Because individuals with colour vision deficiencies (colour-defectives) may have problems with these colour-related tasks, questions were raised about the suitability of colour vision defectives to work as railway dispatchers. In order to answer that, a VDT based Dispatch Colour Vision Test based on the actual railway traffic display was developed previously. Purpose The main purpose of this thesis is to establish the pass/fail scores and repeatability of the VDT based Dispatch Colour Vision Test that resulted from the previous work. Secondly, the study will also examine whether clinical colour vision tests can predict the performance on the practical task. Methods The Dispatch colour vision test was divided into three parts based on the colour sets that the dispatcher had to recognize. The testing computer system used the the same RGB colour settings, graphics card and monitor as in railway dispatch centres. Subjects viewed the display colours and entered their responses by using a mouse. One hundred colour-normals and fifty two colour-defectives participated in the initial session. The test was repeated approximately after 10 days. Ninety three colour-normals (93%) and 44 (85%) colour-defectives participated in the second session. The total number of errors and time to complete the test was recorded. Results Pass/Fail on the VDT Dispatch colour vision test was based on colour-normal errors. Ignoring orange-red errors, two errors were allowed in the first session and one error was allowed in the second session. Based on this criterion, 42% of colour vision defectives could perform as well as colour normal subjects. The kappa coefficient of agreement between the sessions for the colour-defectives was 0.85. Detailed analysis between the colour differences and the errors showed only a weak correlation between the two. However, the general trend was that colour-defectives made more errors on colours that were near or along the same lines of confusions and the colours were nearly equal in luminance. Nevertheless, the interaction between luminance and location with respect to the lines of confusion was not easy to interpret. The time to complete the task for the colour-defectives who passed the test took 14% longer than colour-normals and colour-defectives who failed took 30% longer than colour-normals. All groups showed a similar learning effect with an 18% reduction in mean times to complete the task at the second session. There was no significant correlation between the number of errors and time to complete or the clinical tests and completion times for any of the groups. Clinical colour vision tests have limited value in predicting performance of colour-defectives on the Dispatch test. Logistic analysis results showed that the Farnsworth D-15 along with the Nagel was the best predictor of the VDT Dispatch colour test pass/fail results. However, these results were similar to using the Farnsworth D-15 test alone. Ninety-five percent of the individuals who failed the Farnsworth D-15 also failed the Dispatch test. However, approximately 25% of the individuals who passed the Farnsworth D-15 failed the VDT Dispatch colour test which is an unacceptable false negative rate. These results indicate the Farnsworth D-15 can only be used to predict who is likely to fail the dispatch test. Conclusions Forty two percent of colour vision defectives could perform as well as colour-normals in identifying VDT railway display colours and time to complete the task. Clinical colour vision tests were inadequate predictors of performance in practical task, overall. However, the Farnsworth D-15 was a very good predictor of who would fail the VDT Dispatch test. Hence a practical VDT Dispatch test may be needed to test individuals who would want to work as railway dispatchers.

Introduction Colour codes are used extensively in railways to convey specific information governing movement of trains and equipment on the track. One such task is the railway traffic control display that uses colour coded video display terminals (VDTs) to convey information of the signal status, train movements and track status to the railway dispatcher. Because individuals with colour vision deficiencies (colour-defectives) may have problems with these colour-related tasks, questions were raised about the suitability of colour vision defectives to work as railway dispatchers. In order to answer that, a VDT based Dispatch Colour Vision Test based on the actual railway traffic display was developed previously. Purpose The main purpose of this thesis is to establish the pass/fail scores and repeatability of the VDT based Dispatch Colour Vision Test that resulted from the previous work. Secondly, the study will also examine whether clinical colour vision tests can predict the performance on the practical task. Methods The Dispatch colour vision test was divided into three parts based on the colour sets that the dispatcher had to recognize. The testing computer system used the the same RGB colour settings, graphics card and monitor as in railway dispatch centres. Subjects viewed the display colours and entered their responses by using a mouse. One hundred colour-normals and fifty two colour-defectives participated in the initial session. The test was repeated approximately after 10 days. Ninety three colour-normals (93%) and 44 (85%) colour-defectives participated in the second session. The total number of errors and time to complete the test was recorded. Results Pass/Fail on the VDT Dispatch colour vision test was based on colour-normal errors. Ignoring orange-red errors, two errors were allowed in the first session and one error was allowed in the second session. Based on this criterion, 42% of colour vision defectives could perform as well as colour normal subjects. The kappa coefficient of agreement between the sessions for the colour-defectives was 0.85. Detailed analysis between the colour differences and the errors showed only a weak correlation between the two. However, the general trend was that colour-defectives made more errors on colours that were near or along the same lines of confusions and the colours were nearly equal in luminance. Nevertheless, the interaction between luminance and location with respect to the lines of confusion was not easy to interpret. The time to complete the task for the colour-defectives who passed the test took 14% longer than colour-normals and colour-defectives who failed took 30% longer than colour-normals. All groups showed a similar learning effect with an 18% reduction in mean times to complete the task at the second session. There was no significant correlation between the number of errors and time to complete or the clinical tests and completion times for any of the groups. Clinical colour vision tests have limited value in predicting performance of colour-defectives on the Dispatch test. Logistic analysis results showed that the Farnsworth D-15 along with the Nagel was the best predictor of the VDT Dispatch colour test pass/fail results. However, these results were similar to using the Farnsworth D-15 test alone. Ninety-five percent of the individuals who failed the Farnsworth D-15 also failed the Dispatch test. However, approximately 25% of the individuals who passed the Farnsworth D-15 failed the VDT Dispatch colour test which is an unacceptable false negative rate. These results indicate the Farnsworth D-15 can only be used to predict who is likely to fail the dispatch test. Conclusions Forty two percent of colour vision defectives could perform as well as colour-normals in identifying VDT railway display colours and time to complete the task. Clinical colour vision tests were inadequate predictors of performance in practical task, overall. However, the Farnsworth D-15 was a very good predictor of who would fail the VDT Dispatch test. Hence a practical VDT Dispatch test may be needed to test individuals who would want to work as railway dispatchers.

This work investigates the growth dynamic of the reactive molecular beam epitaxy of Fe3O4 films, and its impact on the cation distribution as well as on the magnetic and structural properties at the surface and the interfaces. In order to study the structure and composition of Fe3O4 films during growth, time-resolved high-energy x-ray diffraction (tr-HEXRD) and time-resolved hard x-ray photoelectron spectroscopy (tr-HAXPES) measurements are used to monitor the deposition process of Fe3O4 ultrathin films on SrTiO3(001), MgO(001) and NiO/MgO(001). For Fe3O4\SrTiO3(001) is found that the film first grows in a disordered island structure, between thicknesses of 1.5nm to 3nm in FeO islands and finally in the inverse spinel structure of Fe3O4, displaying (111) nanofacets on the surface. The films on MgO(001) and NiO/MgO(001) show a similar result, with the exception that the films are not disordered in the early growth stage, but form islands which immediately exhibit a crystalline FeO phase up to a thickness of 1nm. After that, the films grown in the inverse spinel structure on both MgO(001) and NiO/MgO(001). Additionally, the tr-HAXPES measurements of Fe3O4/SrTiO3(001) demonstrate that the FeO phase is only stable during the deposition process, but turns into a Fe3O4 phase when the deposition is interrupted. This suggests that this FeO layer is a strictly dynamic property of the growth process, and might not be retained in the as-grown films. In order to characterize the as-grown films, a technique is introduced to extract the cation depth distribution of Fe3O4 films from magnetooptical depth profiles obtained by fitting x-ray resonant magnetic reflectivity (XRMR) curves. To this end, x-ray absorption (XAS) and x-ray magnetic circular dichroism (XMCD) spectra are recorded as well as XRMR curves to obtain magnetooptical depth profiles. To attribute these magnetooptical depth profiles to the depth distribution of the cations, multiplet calculations are fitted to the XMCD data. From these calculations, the cation contributions at the three resonant energies of the XMCD spectrum can be evaluated. Recording XRMR curves at those energies allows to resolve the magnetooptical depth profiles of the three iron cation species in Fe3O4. This technique is used to resolve the cation stoichiometry at the surface of Fe3O4/MgO(001) films and at the interfaces of Fe3O4/MgO(001) and Fe3O4/NiO. The first unit cell of the Fe3O4(001) surface shows an excess of Fe3+ cations, likely related to a subsurface cation-vacancy reconstruction of the Fe3O4(001) surface, but the magnetic order of the different cation species appears to be not disturbed in this reconstructed layer. Beyond this layer, the magnetic order of all three iron cation species in Fe3O4/MgO(001) is stable for the entire film with no interlayer or magnetic dead layer at the interface. For Fe3O4/NiO films, we unexpectedly observe a magnetooptical absorption at the Ni L3 edge in the NiO film corresponding to a ferromagnetic order throughout the entire NiO film, which is antiferromagnetic in the bulk. Additionally, the magnetooptical profiles indicate a single intermixed layer containing both Fe2+ and Ni2+ cations.

I microrganismi selezionati sono impiegati non solo per il processo di trasformazione della materia grezza in prodotto fermentato, ma anche per migliorare la shelf-life, il gusto, l’aroma, la sicurezza e il valore nutrizionale dei prodotti. La globalizzazione del mercato ha portato a considerare non solo i prodotti tipici popolari europei, come per esempio il vino, ma anche i prodotti tipici dei paesi non europei come la cassava. Per quanto riguarda il settore enologico lo scopo della ricerca è quello di migliorare un tipico vino: l'Ortrugo dei Colli Piacentini con ceppi autoctoni di Saccaromyces cerevisiae. Nelle fermentazioni spontanee i lieviti sono associati all'area geografica, alle condizioni climatiche e alla varietà di vitigno. Alcuni ricercatori sostengono che il micro-ambiente è caratterizzato da specifi Saccaromyces cerevisiae che possono influenzare gli aromi dell'uva. Sfortunatamente le fermentazioni spontanee possono causare aromi indesiderati e arresti fermentativi. L'inoculo del mosto con lieviti selezionati è ormai una pratica consolidata per eliminare i rischi delle fermentazioni spontanee, ma questi lieviti non riescono a enfatizzare le caratteristiche della varietà di uva in quanto derivano da ecosistemi differenti. Nasce quindi l'esigenza di utilizzare ceppi starter autoctoni selezionati, isolati dalle microaree dove i vini sono prodotti in quanto tali ceppi sono potenzialmente meglio adattati a svilupparsi in uno specifico microambiente e meglio esaltano la tipologia di un particolare prodotto. Per quanto riguarda la cassava (Manihot esculenta Crantz) microrganismi selezionati possono essere utilizzati per ridurre la concentrazione di glucoside cianogenetico (linamarina e lotaustralina), molecole tossiche. il consumo di cassava e dei suoi prodotti può causare avvelenamento da cianide con sintomi di vomito, nausea, debolezza e occasionalmente la morte. L'introduzione di cianide tramite il consumo di cassava è quasi certamente la causa dell'insorgenza di neuropatie come per esempio il Konzo (irreversibile paralisi alle gambe) che colpisce particolari zone dell'Africa. La World Health Organisation (WHO)ha stabilito il livello di sicurezza di cianide nella farina di cassava a 10 ppm (FAO/WHO, 1991). / Selected microrganisms are important as agents of the main processes of transformation of the raw materials in fermented product but also as responsible of the improvement in the shelf-life, texture, taste, aroma, as well as safety and nutritional value. The market globalization made us to consider not only popular food and/or beverage in Europe but also in non European countries. In this research I consider wine and cassava products. As regards wine the aim is to improve the Ortrugo wine typicalness by Saccaromyces cerevisiae autochtonous strains. In spontaneous fermentations the yeasts vary according to geography location, climatic conditions and/or grape variety. Some researchers believe that each micro-environment is characterised by specific Saccaromyces cerevisiae that may enhance the grape flavours. Unfortunately spontaneous fermentations may cause off-flavours and fermentation stuck. The selected yeast inoculum in must is one of the consolidated practices to eliminate the risks of spontaneous fermentation, but these yeast are not able to emphasise the characters of grape variety because they are from different ecosystems. Autochthonous yeasts e.g. yeasts isolated from a definite micro-environment are adapted to operate in a must whose characteristics are determined by the variety of the grapes and the “terroir” and, therefore, they able to enhance the peculiarities of a wine. As regards the cassava (Manihot esculenta Crantz) selected microorganisms will be used to reduce the cyanogenic glucosides (mainly linamarin and lotaustralin) toxic molecules. Consumption of cassava and its products may cause cyanide poisoning with symptoms of vomiting, nausea, dizziness, stomach pains, weakness, headache and diarrhoea and occasionally death. Cyanide intake from cassava is almost certainly the cause of Konzo (irreversible paralysis of the legs) in eastern, central and southern Africa. The World Health Organisation (WHO) has set the safe level of cyanogens in cassava flour at 10 ppm (FAO/WHO, 1991).