Thesis (Ph.D.)--Hong Kong University of Science and Technology, 2007. / Includes bibliographical references (leaves 155-168). Also available in electronic version.

Thesis (M.S.)--Rochester Institute of Technology, 2007. / Typescript. Includes bibliographical references (leaves 50-51).

Thesis (Ph. D.)--University of Washington, 2000. / Vita. Includes bibliographical references (p. 140-150).

Monitoring unused IP address space by using network telescopes provides a favourable environment for researchers to study and detect malware, worms, denial of service and scanning activities. Research in the field of network telescopes has progressed over the past decade resulting in the development of an increased number of overlapping datasets. Rhodes University's network of telescope sensors has continued to grow with additional network telescopes being brought online. At the time of writing, Rhodes University has a distributed network of five relatively small /24 network telescopes. With five network telescope sensors, this research focuses on comparative and correlation analysis of traffic activity across the network of telescope sensors. To aid summarisation and visualisation techniques, time series' representing time-based traffic activity, are constructed. By employing an iterative experimental process of captured traffic, two natural categories of the five network telescopes are presented. Using the cross- and auto-correlation methods of time series analysis, moderate correlation of traffic activity was achieved between telescope sensors in each category. Weak to moderate correlation was calculated when comparing category A and category B network telescopes' datasets. Results were significantly improved by studying TCP traffic separately. Moderate to strong correlation coefficients in each category were calculated when using TCP traffic only. UDP traffic analysis showed weaker correlation between sensors, however the uniformity of ICMP traffic showed correlation of traffic activity across all sensors. The results confirmed the visual observation of traffic relativity in telescope sensors within the same category and quantitatively analysed the correlation of network telescopes' traffic activity.

This thesis presents a framework for investigating opportunistic routing in Delay Tolerant Mobile Ad hoc Networks (DTMANETs), and introduces the concept of an Opportunistic Confidence Index (OCI). The OCI enables multiple opportunistic routing protocols to be applied as an adaptive group to improve DTMANET routing reliability, performance, and efficiency. The DTMANET is a recently acknowledged networkarchitecture, which is designed to address the challenging and marginal environments created by adaptive, mobile, and unreliable network node presence. Because of its ad hoc and autonomic nature, routing in a DTMANET is a very challenging problem. The design of routing protocols in such environments, which ensure a high percentage delivery rate (reliability), achieve a reasonable delivery time (performance), and at the same time maintain an acceptable communication overhead (efficiency), is of fundamental consequence to the usefulness of DTMANETs. In recent years, a number of investigations into DTMANET routing have been conducted, resulting in the emergence of a class of routing known as opportunistic routing protocols. Current research into opportunistic routing has exposed opportunities for positive impacts on DTMANET routing. To date, most investigations have concentrated upon one or other of the quality metrics of reliability, performance, or efficiency, while some approaches have pursued a balance of these metrics through assumptions of a high level of global knowledge and/or uniform mobile device behaviours. No prior research that we are aware of has studied the connection between multiple opportunistic elements and their influences upon one another, and none has demonstrated the possibility of modelling and using multiple different opportunistic elements as an adaptive group to aid the routing process in a DTMANET. This thesis investigates OCI opportunities and their viability through the design of an extensible simulation environment, which makes use of methods and techniques such as abstract modelling, opportunistic element simplification and isolation, random attribute generation and assignment, localized knowledge sharing, automated scenario generation, intelligent weight assignment and/or opportunistic element permutation. These methods and techniques are incorporated at both data acquisition and analysis phases. Our results show a significant improvement in all three metric categories. In one of the most applicable scenarios tested, OCI yielded a 31.05% message delivery increase (reliability improvement), 22.18% message delivery time reduction (performance improvement), and 73.64% routing depth decrement (efficiency improvement). We are able to conclude that the OCI approach is feasible across a range of scenarios, and that the use of multiple opportunistic elements to aid decision-making processes in DTMANET environments has value.

Digital audio networks are becoming the preferred solution for the interconnection of professional audio devices. Prominent amongst their advantages are: reduced noise interference, signal multiplexing, and a reduction in the number of cables connecting networked devices. In the context of professional audio, digital networks have been used to connect devices including: mixers, effects units, preamplifiers, breakout boxes, computers, monitoring controllers, and synthesizers. Such networks are governed by protocols that define the connection management rocedures, and device synchronization processes of devices that conform to the protocols. A wide range of digital audio network control protocols exist, each defining specific hardware requirements of devices that conform to them. Device parameter control is achieved by sending a protocol message that indicates the target parameter, and the action that should be performed on the parameter. Typically, a device will conform to only one protocol. By implication, only devices that conform to a specific protocol can communicate with each other, and only a controller that conforms to the protocol can control such devices. This results in the isolation of devices that conform to disparate protocols, since devices of different protocols cannot communicate with each other. This is currently a challenge in the professional music industry, particularly where digital networks are used for audio device control. This investigation seeks to resolve the issue of interoperability between professional audio devices that conform to different digital audio network protocols. This thesis proposes the use of a proxy that allows for the translation of protocol messages, as a solution to the interoperability problem. The proxy abstracts devices of one protocol in terms of another, hence allowing all the networked devices to appear as conforming to the same protocol. The proxy receives messages on behalf of the abstracted device, and then fulfills them in accordance with the protocol that the abstracted device conforms to. Any number of protocol devices can be abstracted within such a proxy. This has the added advantage of allowing a common controller to control devices that conform to the different protocols.

The aim of the study is to investigate what impact the use of VPN has on network performance. An empirical investigation using quantitative research methods was carried out. Two sample scenarios were involved in the study: scenario without VPN and scenario with VPN. In both scenarios, three applications were used in turns, an HTTP, an FTP, and a CBR. FTP was configured to use window size and packet size, while CBR used connection rate and packet size. On the other side, the number of connection was the only parameter used for HTTP. These applications were injected in a 100 Mbps fixed link of an NS2 simulation environment. Throughput and delay averages were measured respectively for the two scenarios and values compared using Student’s t-test. While the TCP and HTTP throughputs were found decreasing, the UDP throughput was not affected by the presence of this VPN. Concerning the delay; the TCP, UDP and HTTP delay were found increasing. / Electrical Engineering / M. Tech. (Electrical Engineering (Computer Systems))

Bandwidth management is a topic which is often discussed, but on which relatively little work has been done with regard to compiling a comprehensive set of techniques and methods for managing traffic on a network. What work has been done has concentrated on higher end networks, rather than the low bandwidth links which are commonly available in South Africa and other areas outside the United States. With more organisations increasingly making use of the Internet on a daily basis, the demand for bandwidth is outstripping the ability of providers to upgrade their infrastructure. This resource is therefore in need of management. In addition, for Internet access to become economically viable for widespread use by schools, NGOs and other academic institutions, the associated costs need to be controlled. Bandwidth management not only impacts on direct cost control, but encompasses the process of engineering a network and network resources in order to ensure the provision of as optimal a service as possible. Included in this is the provision of user education. Software has been developed for the implementation of traffic quotas, dynamic firewalling and visualisation. The research investigates various methods for monitoring and management of IP traffic with particular applicability to low bandwidth links. Several forms of visualisation for the analysis of historical and near-realtime traffic data are also discussed, including the use of three-dimensional landscapes. A number of bandwidth management practices are proposed, and the advantages of their combination, and complementary use are highlighted. By implementing these suggested policies, a holistic approach can be taken to the issue of bandwidth management on Internet links.

Thesis (MTech (Information Technology))--Cape Peninsula University of Technology, 2012. / South Africa has a complex financial and retail service industry with high reliance on the use of IT systems to ensure effectiveness and maintainability. Decision making and improved outcomes may be done through an IT aligned enterprise architecture (EA) strategy. EA is a capability that contributes to the support and success of an organisations' IT. Organisations are currently using EA to better align IT and the business strategy which provides a comprehensive v.ew of the IT system. Thus, EA is increasing in organisations yet the measurement and value of EA is limited to organisations and enterprise architects. The discussions of the benefits and value of EA has been discussed for several years, however there are still no consensus about how the benefits and value of EA can be measured. The lack and clear understanding of the benefits and value of EA needs to consider different aspects of IT as well as the shareholders when measuring the benefits and value of EA to an organisation.

Thesis (MTech (Information Technology))--Cape Peninsula University of Technology, 2006. / This research investigates the ordering process between small suppliers and retailers and the role of the Internet in this process. Product ordering and fulfilment are both important components of a supply chain, of which suppliers and retailers are members. The Internet as an enabling technology has an important role to play in supply chains and therefore also in order processing. Internet technology facilitates Business-to-Business (B2B) transactions. Retailers and their suppliers collaborate to align production with customer demands. Internet-enabled B2B supports this collaboration between businesses, allowing them to gain knowledge about customer demands real-time. This enables them to determine the impact of these demands on their operations. Using the Internet has the advantage that it provides an ever present link that is less costly than private networks and Electronic Data Interchange (EDI). When the Internet is used to facilitate trade and commerce between businesses, ecommerce is established. With Internet-enabled B2B (or B2B e-commerce), multiple suppliers are connected to multiple customers. This reduces production cycle times, reduces inventory, improves speed and quality of communications and reduces costs. This research investigates suppliers in the retail supply chain and focuses more specifically on small businesses due to their reported importance in the South African economy. They provide employment to a large portion of the country's population and contribute almost half to the economic activity. Small suppliers form part of supply chains and have to adhere to the demands exerted by larger supply chain members in order to be included in such supply chains. Small suppliers have just as an important role to fulfil in supply chains as larger companies. Small suppliers are also responsible for connecting and integrating supply chain members and in so doing, reduce costs.