1 |
Distributed Digital Radios for Land Mobile Radio ApplicationsNavalekar, Abhijit C 04 January 2010 (has links)
The main objective of this dissertation is to develop the second generation of Distributed Digital Radio (DDR) technology. A DDR II modem provides an integrated voice/data service platform, higher data rates and better throughput performance as compared to a DDR I modem. In order to improve the physical layer performance of DDR modems an analytical framework is first developed to model the Bit Error Rate (BER) performance of Orthogonal Frequency Division Multiplexing over Frequency Modulation (OFDM/FM) systems. The use of OFDM provides a spectrally efficient method of transmitting data over LMR channels. However, the high Peak-to-Average (PAR) of OFDM signals results in either a low Signal-to-Noise Ratio (SNR) at FM receiver or a high non-linear distortion of baseband signal in the FM transmitter. This dissertation presents an analytical framework to highlight the impact of high PAR of OFDM signal on OFDM/FM systems. A novel technique for reduction of PAR of OFDM called Linear Scaling Technique (LST) is developed. The use of LST mitigates the signal distortion occurring in OFDM over FM systems. Another important factor which affects the throughput of LMR networks is the Push-to-Talk (PTT) delay. A PTT delay refers to the delay between the instant when a PTT switch on a conventional LMR radio is keyed/unkeyed and a response is observed at the radio output. It can be separated into a Receive-To-Transmit Switch Interval (RTSI) or a Transmit-To-Receive Switch Interval (TRSI). This dissertation presents the typical RTSI delay values, distributions and their impact on throughput performance of LMR networks. An analytical model is developed to highlight the asymmetric throughput problem and the unintentional denial of service (UDOS) occurring in heterogeneous LMR networks consisting of radios with different PTT delay profiles. This information will be useful in performance and capacity planning of LMR networks in future.
|
2 |
Estimação de vazão baseada em modelagem e simulação do controle de acesso ao meio em redes PLC / Throughput estimation based on modeling and simulation of medium access control in PLC networksVASQUES, Thiago Lara 18 August 2010 (has links)
Made available in DSpace on 2014-07-29T15:08:15Z (GMT). No. of bitstreams: 1
Dissertacao Thiago Lara Vasques.pdf: 2258919 bytes, checksum: bdbbde461e7636388d4795c9556eb77f (MD5)
Previous issue date: 2010-08-18 / We carried out a study on throughput estimation based on analysis and modeling of
the medium access control in HomePlug 1.0 standard based PLC networks. The data
communication using electrical energy wires has advantages such as presenting
characteristics of ubiquity due to the existent infrastructure, but faces significant obstacles as
fading and noise. The main standard of this kind of home network is the HomePlug, which
defines a protocol based on the method of multiple access with collision avoidance
(CSMA/CA). The HomePlug adds to the CSMA/CA a technique called deferral counter (DC)
that adapts the contention of the nodes in accessing the medium according to network load.
The objective of this work is todo a comparative study of the throughput, which is the ratio of
the packet payload, i.e., the amount of data that is inserted into the body of the datagram, and
the frame transmission time. To this end, we evaluate what is the theoretical maximum
throughput of the PLC channel, we developed a simulator for the CSMA/CA and we propose
a simple probabilistic model to describe the throughput on the network PLC. Finally, we
make a comparison between the results obtained with the simulator and the probabilistic
model to those observed from a real PLC network, proving that the results of the theoretical
maximum throughput and the simulation results are close and that the probability model
becomes a tool for calculating throughput in PLC networks. / Neste trabalho, realizou-se um estudo sobre estimação da vazão baseada na análise e
modelagem do controle de acesso ao meio em redes PLC padrão HomePlug 1.0. A
comunicação de dados através do canal elétrico tem vantagens como apresentar as
características de ubiquidade e da infra-estrutura pré-existente, porém enfrenta obstáculos
importantes como a atenuação e o ruído. O principal padrão desse tipo de rede domiciliar é o
HomePlug, que define um protocolo baseado no método de acesso múltiplo com prevenção
de colisões (CSMA/CA). O HomePlug associa ao CSMA/CA uma técnica chamada de
contador de adiamentos (DC) que adapta a contenção dos nós no acesso ao meio de acordo
com a carga da rede. O objetivo deste trabalho é realizar um estudo comparativo da vazão,
que é a razão entre carga útil do pacote, ou seja, a quantidade de dados que preenchem o
corpo do datagrama, e o tempo de transmissão do quadro. Para isso, avaliou-se qual é a vazão
máxima teórica do canal PLC, desenvolveu-se um simulador para o protocolo CSMA/CA e
foi proposto um modelo probabilístico simples para descrever a vazão na rede PLC. Foi
realizada uma comparação entre os resultados obtidos com o simulador e o modelo
probabilístico com os dados observados em uma rede PLC real, comprovando que os
resultados da vazão máxima teórica e os resultados da simulação são próximos e que o
modelo probabilístico passa a ser uma ferramenta para cálculo de vazão em redes PLC.
|
3 |
SQ-CSMA : universally lowering the delay of queue-based CSMA/CAGanesh, Rajaganesh 1987- 14 October 2014 (has links)
Recent works show that, by incorporating queue length information, CSMA/CA multiple access protocols can achieve maximum throughput in general ad-hoc wireless networks. In all of these protocols, the aggressiveness with which a link attempts to grab the channel is governed solely by its own queue, and is independent of the queues of other interfering links. While this independence allows for minimal control signaling, it results in schedules that change very slowly. This causes starvation and delays - especially at moderate to high loads. In this work we add a very small amount of signaling - an occasional few bits between interfering links. These bits allow us a new functionality: switching - a link can now turn off its interfering links with a certain probability. The challenge is ensuring maximum throughput and lower delay via the use of this new functionality. We develop a new protocol - Switch-enabled Queue-based CSMA (SQ-CSMA) - that uses switching to achieve both of these objectives. This simple additional functionality, and our protocol to leverage it, can be “added on'' to every existing CSMA/CA protocol that uses queue lengths. Interestingly, we see that in every case it has a significant positive impact on delay, universally furthering the performance of existing protocols. / text
|
4 |
Performance Study for Co-existing Wi-Fi and ZigBee Systems and Design of Interoperability TechniquesTang, Yong 21 August 2012 (has links)
Wireless local area networks (WLANs) and wireless sensor networks (WSNs) technologies have been comprehensively developed and deployed during recent years. Since commercial WLAN and WSN products share the same free of license frequency band, the low power, low rate ZigBee based WSNs are vulnerable to the interference from Wi-Fi WLANs. Therefore, it is important to evaluate the performance of ZigBee WSNs that are subjected to interference generated by collocated Wi-Fi WLANs and to design effective counter-measuring techniques should performance improvement is needed. In this research, a versatile testbed for conducting various experiments is established and the ZigBee system’s performance with different clear channel assessment (CCA) modes and energy detection (ED) thresholds are evaluated through extensive experimental measurements in the testbed. It can be concluded from the results that CCA has significant impact on ZigBee’s performance. An existing theoretical analysis approach that is based on the collision time model between ZigBee and Wi-Fi packets is suitably modified to provide analytical evaluation means of the cases we examined. In order to mitigate the interference from the collocated Wi-Fi system, a novel and effective interference-aware adaptive CCA (IAACCA) scheme is proposed and implemented as firmware flashed into Crossbow motes. Experiments confirmed the ability of IAACCA to countermeasure effectively interference generated by Wi-Fi and thus improve the performance of ZigBee WSNs. Finally, a thorough statistical analysis is performed to understand the factors impacting the performance of ZigBee system and is used to further verify our experimental methods.
|
5 |
Cooperative Jamming in Wireless Networks - Turning Attacks into Privacy ProtectionWu, Jingqi 19 December 2008 (has links)
Generally, collisions between packets are undesired in wireless networks. We design this scheme, Cooperative Jamming in Wireless Networks (CJWN), to make use of collision to protect secret DATA packets from being sniffed by a nearby eavesdropper. We are intending to greatly increase the Packet Error Rate (PER) at the eavesdropper when the PER at the receiver is maintained at an acceptable level. This scheme is not intended to completely take the place of various encryption/decryption schemes which are working based on successfully received packets. Adding CJWN to the popular CSMA/CA adopted in IEEE 802.11 will add more security even the key for encryption/decryption is already exposed. Because the overhead of CJWN is very big, we do not suggest using it on every transmission. When some secret packets have a high requirement of confidentiality, CJWN is worth trying at the cost of throughput performance and power.
|
6 |
Performance Study for Co-existing Wi-Fi and ZigBee Systems and Design of Interoperability TechniquesTang, Yong 21 August 2012 (has links)
Wireless local area networks (WLANs) and wireless sensor networks (WSNs) technologies have been comprehensively developed and deployed during recent years. Since commercial WLAN and WSN products share the same free of license frequency band, the low power, low rate ZigBee based WSNs are vulnerable to the interference from Wi-Fi WLANs. Therefore, it is important to evaluate the performance of ZigBee WSNs that are subjected to interference generated by collocated Wi-Fi WLANs and to design effective counter-measuring techniques should performance improvement is needed. In this research, a versatile testbed for conducting various experiments is established and the ZigBee system’s performance with different clear channel assessment (CCA) modes and energy detection (ED) thresholds are evaluated through extensive experimental measurements in the testbed. It can be concluded from the results that CCA has significant impact on ZigBee’s performance. An existing theoretical analysis approach that is based on the collision time model between ZigBee and Wi-Fi packets is suitably modified to provide analytical evaluation means of the cases we examined. In order to mitigate the interference from the collocated Wi-Fi system, a novel and effective interference-aware adaptive CCA (IAACCA) scheme is proposed and implemented as firmware flashed into Crossbow motes. Experiments confirmed the ability of IAACCA to countermeasure effectively interference generated by Wi-Fi and thus improve the performance of ZigBee WSNs. Finally, a thorough statistical analysis is performed to understand the factors impacting the performance of ZigBee system and is used to further verify our experimental methods.
|
7 |
Implementation of the WirelessHART MAC Layer in the OPNET SimulatorYipeng, Wang January 2013 (has links)
Industrial wireless sensor network (IWSN) is an application area of WSN used in industrial process monitoring and control with strict time and reliability requirement. WirelessHART standard is the first international standard for IWSN approved by International Electrotechnical Commission (IEC). This is worthwhile to implement this standard on simulator platform. Based on the study of WirelessHART standard, this thesis set up a primary implementation of the MAC layer of WirelessHART standard. To our best knowledge, this is the first comprehensive implementation of WirelessHART using OPNET simulator. The implementation has been evaluated rational. And some improvement of current implementation and standard have also been proposed and implemented. Flexible dedicated slot assignment has also been proposed to reduce the packet loss rate caused by influences of the physical channel.
|
8 |
Efficient GTS Allocation Schemes for IEEE 802.15.4Haque, Syed E 11 April 2012 (has links)
IEEE 802.15.4 is a standard defined for wireless sensor network applications with limited power and relaxed throughput needs. The devices transmit data during two periods: Contention Access Period (CAP) by accessing the channel using CSMA/CA and Contention Free Period (CFP), which consists of Guaranteed Time Slots (GTS) allocated to individual devices by the network coordinator. The GTS is used by devices for cyclic data transmission and the coordinator can allocate GTS to a maximum of only seven devices. In this work, we have proposed two algorithms for an efficient GTS allocation. The first algorithm is focused on improving the bandwidth utilization of devices, while the second algorithm uses traffic arrival information of devices to allow sharing of GTS slots between more than seven devices. The proposed schemes were tested through simulations and the results show that the new GTS allocation schemes perform better than the original IEEE 802.15.4 standard.
|
9 |
Performance Study for Co-existing Wi-Fi and ZigBee Systems and Design of Interoperability TechniquesTang, Yong January 2012 (has links)
Wireless local area networks (WLANs) and wireless sensor networks (WSNs) technologies have been comprehensively developed and deployed during recent years. Since commercial WLAN and WSN products share the same free of license frequency band, the low power, low rate ZigBee based WSNs are vulnerable to the interference from Wi-Fi WLANs. Therefore, it is important to evaluate the performance of ZigBee WSNs that are subjected to interference generated by collocated Wi-Fi WLANs and to design effective counter-measuring techniques should performance improvement is needed. In this research, a versatile testbed for conducting various experiments is established and the ZigBee system’s performance with different clear channel assessment (CCA) modes and energy detection (ED) thresholds are evaluated through extensive experimental measurements in the testbed. It can be concluded from the results that CCA has significant impact on ZigBee’s performance. An existing theoretical analysis approach that is based on the collision time model between ZigBee and Wi-Fi packets is suitably modified to provide analytical evaluation means of the cases we examined. In order to mitigate the interference from the collocated Wi-Fi system, a novel and effective interference-aware adaptive CCA (IAACCA) scheme is proposed and implemented as firmware flashed into Crossbow motes. Experiments confirmed the ability of IAACCA to countermeasure effectively interference generated by Wi-Fi and thus improve the performance of ZigBee WSNs. Finally, a thorough statistical analysis is performed to understand the factors impacting the performance of ZigBee system and is used to further verify our experimental methods.
|
10 |
Simulation of the MAC Portion of IEEE 802.11 and Bursts of Errors for Wireless Data NetworksMoslehi, Farhood 28 August 1997 (has links)
The focus of this research is to investigate the effects of bursts of errors and packet collisions on the performance of the medium access control (MAC) portion of the IEEE 802.11 wireless local area network (LAN) protocol.An important ingredient in rapid expansion of wireless networks is the seamless transition between wired and wireless systems. The IEEE standards group in charge of developing the widely used IEEE 802.3 LAN standard has developed the IEEE 802.11 wireless LAN standard. IEEE 802.11 remains hidden from the upper levels of the network, thus allowing a seamless transition between networks. The foundation protocol for the IEEE 802.11 standard, known as Distributed Foundation Wireless Medium Access Control (DFWMAC), operates at the MAC level of the Data Link Layer. The protocol bases its access control mechanism on a principle called Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA), which is an adaptation of the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) protocol used by IEEE 802.3 standard. The collision avoidance scheme in CSMA/CA allows data packets to be transferred via the wireless medium with lower probability of packet collision. In a slotted multi-access wireless system, performance parameters are affected by the bit error rates on the communication channel. These errors occur as a result of noise introduced by the radio channel or data packet collisions. Collisions occur when two or more stations select the same time slot to transmit their data, thus causing corruption in data packets. In this research, a simulation model coded in Microsoft's Visual Basic programming environment is utilized to investigate the effects of bit errors and packet collisions on performance in CSMA/CA. Performance parameters used in this study include throughput, medium utilization, collisions and station data queue lengths. In the simulation model, error bursts in the communication channel are modeled using a simple Gilbert model with two states, good (G) and bad (B). State G is error free, thus errors can only occur while the model is in state B. Collisions are simulated by two or more stations starting to transmit data packets in the same time slot. Therefore, as the number of stations increases, more and more stations compete for the medium, resulting in an increase in the number of collisions. Collisions are also increased by the amount of traffic that each station introduces into the system. Station load is defined here as the number of data packets per unit time that are released by the higher network protocol layers.The results in Chapter 5 demonstrate that higher network throughput can be achieved when the aggregate load on the network is distributed. For example, 30 stations offering 20 kilobits per second (kbps) of load for a total of 600 kpbs, results in a network throughput of 585 kbps. However, three stations offering 200 kbps of load for a total of 600 kbps offered load, results in a network throughput of 486 kbps. The distributed load is serviced at a 17 percent higher rate. However, once the network becomes saturated at above 40 stations for this model, collisions will more than offset the performance gains produced by the distribution of load.Furthermore, reducing the packet size by 50 percent under an approximately 19.5 percent packet error rate results in a 12 percent gain in throughput. This is primarily due to higher utilization of the network by shorter packets. However, as the packet error rate is reduced, the performance gap between the two packet sizes is reduced. Once the errors are removed completely from the communications channel, the longer packets produce a higher throughput than the shorter packets. / Master of Science
|
Page generated in 0.3463 seconds