Diploma thesis is intended on a polycrystalic diamond and a pocrystalic cubic boron nitride from the standpoint of their description, physical, mechanical and cutting properties, use and contemporary trends of development at renowned producers of tools and tool materials. The aim of the work was a complex working of conditions (type of cutting material, cutting conditions), which are recommended by choice producers for the effective turning applications their kind of superhard tool materials.

The master’s thesis is aimed at superhard cutting materials (polycrystalline diamond and polycrystalline cubic boron nitride) and their effective utilization. It describes the characteristics and production of these materials and evaluates product ranges of the most significant producers of tools and tool materials in given area. It further compares working conditions of selected world's producers which are related to the growing utilization of these materials in machining process. The thesis also deals with the cutting power of tools and provides a technical-economic assessment of the discussed issue.

This master’s thesis is concerned with subject matter hard machining with defined geometry edge tools. Aim master’s thesis is analysis and parameters evaluation machined surface at hard machining. This master’s thesis contain a characteristic of hard materials, used technology for cutting operation, but also tools and cutting conditions suitable for hard machining. In the conclusion are parameters evaluation machined surface the workpiece.

n the first part of this diploma thesis there are described basic findings about superhard cutting materials (sorts, notation, structure, physical-mechanical properties, usage, production) and evaluates this tool of material from the aspect of cutting ability. The second part focused on complex data processing about assortment of superhard cutting materials of significant tools materials producers and comparison of work conditions (kind of machined ma-terials, cutting conditions), which are recommend for effective turning applica-tions by producers.

Diploma thesis is focused on cutting superhard materials (polycrystalline diamond and polycrystalline cubic boron nitride). It deals with physical, mechanical and cutting properties, production and effective use. Evaluative product range of superhard cutting materials of the prominent world producers in terms of cutting conditions and type of materials machined in turning.

This diploma work is dealing with the progressive production technology proposal of the valve body type S43 components. This is the high-pressure valve for the classical power supply. Here in the work is described the structural design of the valves, the material of the valve body and its machinability. Following an analysis of the existing production technology is the new production technology proposal for this part. All is designed with regards to the business possibilities of the Armaturka Vranová Lhota company. In conclusion of the work is presented the technical economic evaluation of both the existing and the proposed manufacturing technology.

This diploma thesis is aimed on methods of the coating cutting material (cemented carbide, cermets, cutting ceramic, super hard materials) and evalutation individual method regarding technological posibilities of deposition of hard coatings a their mechanical, thermal and che-mical properties. The task of the work is full elaboration obtained technical knowledges and mainly evalutation a comparison of the work conditions (kind of the cutting materials, cutting conditions) that selected producers recomended for effective turning aplications of the coa-tings cutting materials.

Thesis dealing with cutting ceramics and its efficient use. Introduction describes the general characteristics of the cutting of ceramics, its history and development and production of various kinds. This section describes the mechanical and physical properties with potential application in machining. The se-cond part is an overview of cutting-frame in the range of selected world leaders. Ano-ther section focuses on general assessment of the power of cutting tools and other ma-terials comparison. The fourth part, is comparing the working conditions of producers and tools intended for cutting.

This thesis deals with the rationalization of production technology of selected component. The first part contains a brief introduction of the company NTS Prometal Machining s.r.o. and brief description of the product. The following section is an analysis of existing manufacturing technology. The practical part is focusing on the proposal of rationalization versions of the production process. After evaluation of all possible options of rationalization there has been developed a new technological process with a respect to time and cost savings. Finally there was carried out economical evaluation and recommendation for further production of this component.

The thesis in question deals with the influence of geometry of the cutting tool with a non-null angle r and of the cutting conditions on change of cutting tool’s overall deformation during the process of cutting-off and grooving. When conducting the experiments the loading of cutting tool was measured, there was created a simple 3D model of the cutting tool based on measured data, the deformation analysis of the cutting tool by the simulation programme ANSYS was performed and on the grounds of established facts there was made a conclusion on attributes of the cutting tool during the process of cutting-off and grooving.