Philosophiae Doctor - PhD / Fossil fuels are part of fuels that are formed from natural processes and they are called non-renewable sources of energy. These include natural gas, coal and oil. They have been used for decades to produce energy globally. However, there are some factors that related with the use of fossil fuels which results in an increase in the requirement of large amounts of energy. In addition, the use of fossil fuels as energy source has a negative impact on the environment and they cannot be reused. It is expected that at some point they will run out. Thus, a need for a renewable, clean and plentiful source of energy is urgent. Solar energy is one of the energy sources that may overcome fossil fuel drawbacks.

No description available.

This research, focusing mainly on tocotrienols, includes two parts. The first part concerns the uptake and growth inhibition of tocotrienols in PC-3 cells. The second part is a study of the physiochemical properties of Vitamin E. In the cellular study our results suggested that position 5 of chroman head and side-chain are very important in determining the uptake of tocotrienols and growth inhibition of PC-3 cells. The uptake and growth inhibition are not necessarily related to the antioxidant properties of tocotrienols. Of the physiochemical studies, the results suggested that the antioxidant properties of vitamin E are due to the phenolic O-H group. In ethanol solution, each tocotrienol has a higher oxidation potential than its corresponding tocopherol. The oxidation potentials of vitamin E are in the order ofα-form < γform < δ-form. The theoretical calculations show that the side chains of tocotrienols are less ordered than those of tocopherols.

Due to enhanced properties such as large surface area-to-volume ratio, metal nanoparticles are often employed as catalysts for various applications. However, most studies involving nanoparticle catalysts have been conducted on collections of particles rather than single nanoparticles. Results obtained for ensemble systems can be difficult to interpret due to variations in particle loading and interparticle distance, which are often challenging to control and characterize. In this study, two immobilization strategies for incorporating gold nanoparticles (AuNPs) on carbon fiber ultramicroelectrodes (UMEs) were compared with the goal of extending these techniques to nanoelectrodes for studies of single AuNPs. Both layer-by-layer deposition of AuNPs on natural carbon fiber UMEs and direct reduction of AuNPs on nitrided carbon fiber UMEs were explored. Although both methods proved feasible, the direct reduction method seemed to be more effective and should better enable direct comparisons of bare and capped AuNPs.

Parkinson's disease (PD) is a neurodegenerative condition that affects millions of people worldwide. The exact etiology of PD is unknown. However, it is well established that environmental factors contribute to the onset of PD. In particular, chemicals such as the insecticide Rotenone have been shown to increase the death of dopaminergic (DA) neurons by increasing levels of reactive oxygen species (ROS). ROS such as hydrogen peroxide (H2O2) have been shown to be elevated above basal levels in PD patients. Currently, to measure H2O2 concentrations, a commercially available (Amplex® Red) fluorescent assay is used. However, the assay has limitations: it is not completely specific to hydrogen peroxide and can only measure extracellular ROS concentrations. This research focuses on testing an electrochemical sensor that uses cyclic voltammetry to quantitatively determine concentrations of H2O2 released from a cell culture. The sensor was first tested in normal cell culture conditions. Next, chemical interference was reduced and the sensor was optimized for accuracy by altering protein concentrations in the media. Finally, Rotenone was added to a cell culture to induce H2O2 production. Near real-time measurements of H2O2 were taken using the sensor and comparisons made to the fluorescent assay method. Overall, we are trying to determine if the electrochemical sensor can selectively and quantitatively measure H2O2 released from cells. Being able to track the production, migration and concentration of H2O2 in a cell can help researchers better understand its mechanism of action in cell death and oxidative damage, thus getting closer to finding a cure for PD.

No description available.

Electrochemiluminescence (ECL) is a phenomenon whereby electrochemical reactions generate a product that is capable of emitting light. ECL’s high sensitivity, selectivity, extremely low background, and relatively simple instrumentation make it particularly well-suited for chemical sensing and biosensing strategies. Here we report a simple ECL imaging system based on a camera interfaced with a zoom lens to compare pencil graphite electrode (PGE) and screen-printed carbon electrode (SPCE) arrays as ECL platforms. With this system, ECL signals generated from tris(2,2′- bipyridine)ruthenium(II) chloride hexahydrate ([Ru(bpy)3]2+) using co-reactant tri-n-propylamine (TPA) were linear with respect to [Ru(bpy)3]2+ concentrations from 9 to 450 μM. Detection limits for [Ru(bpy)3]2+ were found to be 1.8 μM with PGEs and 0.9 μM with SPCEs. Immobilization of a thin polyvinylpyridine (PVP) film ECL reporter [Ru(bpy)2(PVP)10]2+ on SPCEs was also investigated. Overall, the combination of PGEs or SPCEs with the simple ECL imaging system offers a cost-effective approach to ECL-based sensing and biosensing.

Over the past several years as interest in cleaner energy sources has grown nuclear power has come to the forefront. However, as interest in nuclear power grows so does the concern over the amount of high-level radioactive waste produced. Currently, the most popular way to deal with spent nuclear fuel is interim storage until a viable treatment option becomes available. Simply waiting for spent fuel to become safe to handle will take thousands of years and is not a reasonable long-term solution. We will soon run out of space in our spent fuel pools and while more dry storage space can be found it is not an ideal solution. One answer to this problem is the reprocessing of spent nuclear fuel. This could be done with either the plutonium uranium reduction extraction (PUREX) method or the pyroprocessing method. Since PUREX does not have the same level of built-in proliferation resistance as pyroprocessing, pyroprocessing is starting to be seen as a good alternative method. Pyroprocessing would take the spent nuclear fuel from a light water reactor and make it into a metal-based fuel that could be used in certain advanced reactors. Molten salt reactors are of particular interest when it comes to reprocessing spent nuclear fuel because of their unique property of using a liquid fuel. Molten salt reactors and spent fuel reprocessors could be directly connected which would save both time and money as little storage and transportation would need to be considered. Regardless of how and where the used nuclear fuel is being recycled it is important to be able to keep track of the major actinides and fission products in the fuel as it moves through the process. Electrochemical concentration measurements are straightforward and well understood in static cases when there is only a single element to consider. When additional elements are added, or the system is flowing rather than static, things get slightly more complicated but are still decently well understood. However, in the case of spent fuel reprocessing the system is both be flowing and contains much more than a single element. This case is not well understood and is what this study attempts to understand. Two different rotating electrodes were designed to simulate flowing conditions in an electrochemical cell. The first was a tungsten rotating disk electrode (RDE) and the second was a graphite RDE. We were not able to fully insulate the tungsten RDE and were therefore unable to achieve reliable results. Because of this the tungsten design was put aside in favor of the graphite design, which did prove to be sufficiently insulated. The graphite RDE was tested in two different salt systems: LiCl-KCl-NiCl2-CrCl2 and LiCl-KCl-EuCl3-SmCl3. In the nickel-chromium system the graphite RDE produced the expected results. The calculated nickel concentration was found to be within 10% of the measured concentration. Calculations of the chromium concentration, however, were not possible due to the deposition of nickel on the graphite surface, which increased the surface area of the working electrode. When the graphite RDE was tested in the second system it was first tested in the ternary salt LiCl-KCl-EuCl3 and was able to produce decent results. The concentration of europium calculated from the scan was within 10% of the measured value. When the RDE was tested in the LiCl-KCl-EuCl3-SmCl3 salt the results did not come out as expected. Several rather noisy CV curves were obtained and no alterations to the cell seemed to affect them. At this point it was determined that the reason for the confused scans was a connection problem that could not be remedied within the time frame of this study. While this study does not accomplish the task it set out to do, it is a good step in the direction toward understanding flowing systems containing more than a single element of interest and has successfully designed a reliable graphite RDE. / Master of Science / As interest in nuclear power continues to grow, so does the concern over the amount of high-level nuclear waste produced. More nuclear power means more nuclear reactors and thus more spent nuclear fuel to be dealt with. Currently most used nuclear fuel ends up in interim storage facilities where it is meant to wait until it is safe to handle, which could take several thousand years, or until a reliable disposal method is determined. On this path the amount of spent fuel that requires storage will quickly overrun the amount of storage space safely available. One way to reduce the amount of nuclear waste is to reprocess it to be used as fuel for different types of reactors. The pyroprocessing method takes the spent nuclear fuel from a typical light water reactor and recycles it into fuel that can be used in certain types of advanced reactors, such as molten salt reactors (MSR) and sodium-cooled fast reactors (SFR). The reprocessing system works to separate the usable actinide elements, such as uranium and plutonium, from any fission products or other contaminants. During these processes it is important to be able to keep track of the concentrations of each of these different elements to ensure proper separation. This study examines the use of two rotating disk electrode (RDE) designs that are meant to simulate the flowing conditions found in many reprocessing systems. These RDEs were to be used to measure the concentrations of different elements in molten salt systems. The first design, a tungsten RDE, could not be properly insulated and thus was unable to produce reliable results when tested in the electrochemical cell. The second design was a graphite RDE. This design did prove to be properly insulated and was able to produce good results when tested in the cell. The graphite RDE was tested in both LiCl-KCl-NiCl2-CrCl2 and LiCl-KCl-EuCl3-SmCl3. In the first system the concentration of nickel was correctly calculated using the data collected with the graphite RDE, while the chromium concentration could not be due to the nickel deposition on the graphite. In the second system, good results were obtained before the SmCl3 was added to the salt. At this point a connection error became apparent and reliable results were no longer possible. Further study is needed to understand the LiCl-KCl-EuCl3-SmCl3 system using the graphite RDE.

In an electrochemical sensor, the sensing performance is mainly dependent on the mass transport of the analyte towards the working electrode-electrolyte interface and working electrode properties. Carbon nanomaterials like carbon nanotubes are widely employed to modify the working electrode properties for sensitive detection. A simulation model is formulated to investigate the effects of modifying a planar bare electrode with carbon nanotubes on electrochemical detection of fenitrothion (FT, an organophosphate). The model revealed that porous electrodes caused the change in mass transport regime and influenced FT’s electrochemical response. The results aided in understanding the influence of the porous electrode on analyte detection and thus assisted in the fabrication of an ultrasensitive electrochemical sensor. Simulation supported synthesis of a highly sensitive ink to produce highly porous and electrocatalytic electrodes. Activated carbon (AC) possesses high porosity and surface area, but they suffer from lower electrical conductivity. To enhance their conductivity, AC was co-doped with nitrogen and sulfur. Multiwalled carbon nanotubes were incorporated to further improve their porosity and electrocatalytic properties. The synthesized nitrogen-sulfur co-doped activated carbon coated multiwalled carbon nanotube (NS-AC-MWCNT) ink produced highly porous electrocatalytic electrodes. The sensor revealed a 4.9 nM limit of detection (LOD) under optimized conditions. However, it failed to overcome the enzymatic sensors’ performances. The ultrasensitive performance was achieved by incorporating a detecting agent in the ink that instilled analyte capture ability. Metal oxides like ZrO2, MnO2, and MgO possessed affinity towards organophosphate (fenitrothion), heavy-metal ion (lead), and nutrient (nitrite). Metal oxides were modified with 3,4-dihydroxylbenzaldehyde (DHBA) – Chitosan (CHIT) to produce well dispersed and uniformly coated stable electrodes. The ZrO2-DHBA-CHIT/NS-AC-MWCNT sensor achieved a remarkable limit of detection of 1.69 nM for FT. The sensor's performance exceeded the enzymatic-based sensors. The commonly found chemical interferents had negligible interference. The sensor produced reliable and satisfactory performance in lake and tap water. The MnO2-DHBA-CHIT/NS-AC-MWCNT/GCE and MgO-DHBA-CHIT/NS-AC-MWCNT/GCE sensors produced an enormous improvement in the sensor performance compared to unmodified electrodes for lead and nitrite detection. The preliminary results on detecting other pollutants like lead and nitrite showed the importance of the methodology in providing a platform for a new class of metal oxide-based sensors. / Thesis / Doctor of Philosophy (PhD) / The growing population and rapid industrial development are affecting the water quality worldwide. The major water pollutants are organophosphates, heavy metal ions, and nutrients. These water pollutants are harmful, and their bioaccumulation poses a major health concern. In the USA alone, water quality issues are predicted to cost $210 billion annually. Therefore, sensors to detect water pollutants are developed to monitor their environmental footprints. Electrochemical sensors are popularly used to detect water pollutants owing to their low-cost and high sensitivity. The objective of this dissertation was to fabricate highly sensitive and specific electrochemical sensors to detect organophosphate (e.g., fenitrothion, FT), heavy metal ion (e.g., lead), and nutrient (e.g., nitrite). The sensors were fabricated with ink based on nanomaterials like carbon nanotubes and detecting agents like metal oxides. The fabricated sensors achieved very high sensitivity and specificity and can detect water pollutants in lake and tap water.

The industrial revolution caused the release of carbon dioxide (CO2) into the atmosphere leading to a climate crisis. The impact of more CO2 in the atmosphere has been experienced by everybody. The summers are longer and hotter, while the winters are colder and shorter. The ocean water has become more acidic threatening the ocean life. There is an immediate need to reduce CO2 and switch to alternate energy for human survival. Electrochemical reduction of CO2 (ERC) is a promising technology capable of converting excess CO2 into valueded products. The process of recycling CO2 can address the problem of excess CO2 and is a sustainable solution until our dependence on fossil fuels is reduced. However, currently there are very few catalysts that can convert CO2 into valuable products with a low overpotential. The current research evaluates new catalysts for their ERC potential. [Ni(cyclam)]2+ is a well-known catalyst used to reduce CO2 homogeneously. Therefore, it was used as a standard to optimize the CO2 evaluation protocol. Two new catalysts developed in Dr. Hollis's laboratory, a Pt- pincer and a Fepincer molecule were assessed using this method. Cyclic voltammetry and bulkelectrolysis (BE) experiments were performed under Ar and CO2 environments. The gaseous products from BE were primarily CO and H2 and their quantitative measurement was performed using gas chromatography. Formate determination was performed using UV-Vis spectroscopy. Faradaic yields were calculated for CO, H2, and formate. The overpotentials were calculated for all the processes, and a comparison was made to determine the most efficient process. The turnover numbers (TON) and the turnover frequencies (TOF) of all the catalysts were calculated. Based on all the criteria, the Fepincer complex was determined to be the most promising catalyst for further optimization. Additionally, a Faradaic efficiency calculation spreadsheet was created to improve calculation efficiency. The protocol described here has been successfully applied to assess new catalysts and can prove to be an invaluable tool when numerous catalysts require evaluation.