The dissertation describes several types of low and high voltage distribution networks including their implementation in specified location with regards to the reliability and quality of electric power supply. The distributions networks are classified according to ways of cable routing, distribution line voltage levels as well as according to types of network interconnections. The high and low voltage distribution networks are further categorized based on used cable types, where, more attention is paid to insulated lines used in the Czech Republic, low voltage lines called „AES“ and „PAS“ high voltage lines used more and more during the distribution network reconstruction. Attention is also given to the description of used methodology for the calculation of network performance stability. An individual part of the dissertation is devoted to a low voltage distribution network proposal in the village of Kovalovice. Based on performed analysis of distribution network conditions, several reconstruction versions were proposed with the help of „KASI“ software, the description of which is also included. The proposed versions are further analysed for both, technical and economical aspects and is selected most suitable version of the distribution network.

A method of producing steel that is not used in Sweden today is direct reduction using natural gas, a method which could has enormous potential in the future of steelmaking. Historically, steelmaking prioritized productivity and profitability. However, other aspects such as safety, sustainability, and environmentally friendliness have become increasingly important to Swedish steelmakers. This study evaluates the usage of natural gas to  directly reduce iron ore into the porous form known as iron sponge, then finally processing that sponge into crude steel. The technology available today is assessed through a literature review, then two calculative data-based model: using DRI sponge in a traditional integrated steelmaking line or replacing steel scrap with it in an electric arc furnace. While this technology is used in many regions where natural gas is plentiful, it has not yet been used in Sweden. Now, when the Swedish natural gas network is expanding and the vehicular transportation of liquid natural gas is becoming more and more viable, it is a prime situation to evaluate direct reduction in Sweden. While models require assumptions and estimations, they suggest that DRI will absolutely be a viable option in the years to come. Integrated plant operators can reduce their immense carbon emissions for a reasonable price, while DRI sponge melting in an electrical arc furnace can either help steelmakers escape the volatile scrap market or be used to replace the blast furnace as a whole in the future. / En metod för att producera stål som inte används i Sverige idag är direkt reduktion med hjälp av naturgas, en metod som har en enorm potential i framtida ståltillverkning. Historiskt har ståltillverkningen prioriterat produktivitet och vinst, men säkerhet, hållbarhet, och miljövänlighet har blivit områden mer och mer viktiga för svenska ståltillverkare. Den här studien utvärderar användningen av naturgas för att direkt reducera järnmalm till den porösa formen känd som järnsvamp, och sen bearbeta den till primärt stål. Teknologin som flnns idag utvärderas genom en litteraturstudie, vars data beräknas till två scenariomodeller: användningen av järnsvamp i ett traditionellt integrerat stålverk eller genom att ersätta stålskrot med järnsvamp i ljusbågsungen. Den här teknologin används redan idag i regioner där naturgas är lättillgängligt, men har hittills inte använts i Sverige. Men nu när Sveriges naturgasnät byggs ut och fordonstransporterad flytande naturgas blir mer och mer kostnadseffektiv så är det lämpligt att utvärdera direkt reduktion i Sverige. Modellerna kräver antaganden och uppskattningar, men de pekar på att direkt reducering av järnmalm kommer att vara en genomförbar metod för ståltillverkning i en nära framtid. Integrerade masugnslinjer kan minska sina enorma koldioxidutsläpp till ett rimligt pris, och järnsvampssmältning i ljusbågsugn kan hjälpa ståltillverkare att undanfly den instabila stålskrotsmarknaden eller användas för att helt ersätta masugnsproduktion i framtiden.

This thesis deals with money management in municipality Libchavy in years 2005 - 2007. Its theoretical part sums sup the most important pieces of knowledge concerning municipality functioning and money management of municipality. The practical part comprises the analyses of the status of municipality money management in the field of budget receipts and budget expenditures. In terms of previous pieces of knowledge, there are defined proposals for improving money management and contribution of municipality.