The increase in capacity demand along with the advancement in digital signal processing (DSP) have recently revived the interest in coherent optical communications and led to its commercialization. However, design and development of robust DSP algorithms for example for carrier phase recovery (CPR) becomes complex as we opt for high order modulation formats such as 16QAM and beyond. Further, electrical-domain dispersion compensation (EDC), while providing many advantages, makes the system more susceptible to laser frequency noise (FN). For instance, in coherent optical links with post-reception EDC, while the transmitter frequency noise causes only phase impairment, the local oscillator (LO) FN in these systems results in a noise enhancement in both amplitude and phase. This noise is commonly known as equalization enhanced phase noise (EEPN). It results in asymmetric requirements for transmitter laser and LO laser. Further, the system design in the presence of lasers with non-white frequency noise becomes increasingly challenging for increased capacity-distance product. The main contributions of this thesis are, firstly, an experimentally validated theory of coherent optical links with lasers having general non-white frequency noise spectrum and corresponding system/laser design criteria and mitigation technique. Secondly, low complexity and high phase noise tolerant CPR for high order modulation formats. The general theory propounded in this thesis elucidates the origin of the laser frequency noise induced noise enhancement in coherent optical links with different DSP configurations. The thesis establishes the existence of multiple frequency noise regimes and shows that each regime results in different set of impairments. The influence of the impairments due to some regimes can ideally be reduced by optimizing the corresponding mitigation algorithms, while other regimes cause irretrievable impairments. Experimentally validated theoretical boundaries of these regimes and corresponding criteria applicable to system/laser design are provided. Further, an EEPN mitigation method and its two possible implementations are proposed and discussed. The thesis also demonstrates an intrinsic limitation of the conventional Blind Phase Search (BPS) algorithm due to angular quantization and provides methods to overcome it. Finally, this thesis proposes and demonstrates single stage and multi-stage carrier phase recovery algorithms for compensation of phase impairments due to the two lasers for higher order circular and square modulations. The proposed methods outperform the state of art algorithms both in performance and in complexity. / <p>QC 20170516</p> / European project ICONE gr. #608099

Coherent detection together with multilevel modulation formats has the potential to significantly increase the capacity of existing optical communication systems at no extra cost in signal bandwidth. However, these modulation formats are more susceptible to the impact of different noise sources and distortions as the distance between its constellation points in the complex plane reduces with the modulation index. In this context, digital signal processing (DSP) plays a key role as it allows compensating for the impairments occurring during signal generation, transmission and/or detection relaxing the complexity of the overall system. The transition towards pluggable optical transceivers, offers flexibility for network design/upgrade but sets strict requirements on the power consumption of the DSP thus limiting its complexity. The DSP module complexity however, scales with the modulation order and, in this scenario, low complex yet high performance DSP algorithms are highly desired. In this thesis, we mainly focus on the impact of laser phase noise arising from the transmitter and local oscillator (LO) lasers in coherent optical communication systems employing high order modulation formats. In these systems, the phase noise of the transmitting and LO lasers translate into phase noise in the received constellation impeding the proper recovery of the transmitted data. In order to increase the system phase noise tolerance, we firstly explore the possibility of re-arranging the constellation points in a circularly shaped mQAM (C-mQAM) constellation shape to exploit its inherent phase noise tolerance. Different low-complex carrier phase recovery (CPR) schemes applicable to these constellations are proposed along with a discussion on its performance and implementation complexity. Secondly, the design guidelines of high performance and low complex CPR schemes for conventional square mQAM constellations are presented. We identify the inherent limitation of the state-of-the-art blind phase search (BPS) carrier phase recovery algorithm which hinders its achievable performance and implementation complexity and present a low complex solution to overcome it. The design guidelines of multi-stage CPR schemes for high order modulation formats, where the BPS algorithm is employed at any of the stages, are also provided and discussed. Finally, the interplay between the received dispersed signal and the LO phase noise is analytically investigated to characterize the origin of the equalization enhanced phase noise phenomena. / <p>QC 20170516</p> / EU project ICONE, gr. #608099

Les formats de modulation bidimensionnels (i.e. basés sur l’amplitude et la phase de l’onde porteuse) ont gagné depuis peu le domaine des transmissions par fibre optique grâce aux progrès conjoints de l’électronique rapide et du traitement du signal, indispensables pour réaliser les récepteurs opto-électroniques utilisant la détection cohérente des signaux optiques. Pour pallier les limites actuelles en rapidité de commutation des circuits intégrés électroniques, une voie de recherche a été ouverte il y a quelques années, consistant à utiliser des technologies optiques pour faciliter la parallélisation du traitement du signal, notamment dans l’étape d’échantillonnage ultra-rapide du signal rendu possible par des horloges optiques très performantes. Le thème principal de cette thèse concerne l’étude théorique et expérimentale de la fonction de conversion analogique-numérique (ADC) de signaux optiques par un récepteur opto-électronique cohérent, associant les étapes d’échantillonnage optique linéaire, de conversion analogique-numérique et de traitement du signal. Un prototype, utilisant une solution originale pour la source d’échantillonnage, est modélisé, réalisé et caractérisé, permettant la reconstruction temporelle de signaux optiques modulés selon divers formats : NRZ, QPSK, 16-QAM. Les limitations optiques et électroniques du système sont analysées, notamment l’impact sur la reconstruction des signaux de divers paramètres : le taux d’extinction de la source optique, les paramètres de l’ADC (bande passante BW, temps d’intégration et nombre effectif de bits ENOB). Par ailleurs, de nouveaux algorithmes de traitement du signal sont proposés dans le cadre de la transmission optique cohérente à haut débit utilisant des formats de modulation bidimensionnels (amplitude et phase) : deux solutions sont proposées pour la compensation du déséquilibre de quadrature IQ dans les transmissions mono-porteuses: une méthode originale de l’estimation du maximum du rapport signal sur bruit ainsi qu’une nouvelle structure de compensation et d’égalisation conjointes; ces deux méthodes sont validées expérimentalement et numériquement avec un signal 16-QAM. Par ailleurs, une solution améliorée de récupération de porteuse (décalage de fréquence et estimation de la phase), basée sur une décomposition harmonique circulaire de la fonction de maximum de vraisemblance logarithmique, est validée numériquement pour la première fois dans le contexte des transmissions optiques (jusqu’à une modulation de 128-QAM). Enfin les outils développés dans ce travail ont finalement permis la démonstration d’une transmission sur 100 km d’un signal QPSK à 10 Gbaud fortement limité par un bruit de phase non linéaire et régénéré optiquement à l’aide d’un limiteur de puissance préservant la phase basé sur une nanocavité de cristal photonique. / Bi-dimensional modulation formats based on amplitude and phase signal modulation, are now commonly used in optical communications thanks to breakthroughs in the field of electronic and digital signal processing (DSP) required in coherent optical receivers. Photonic solutions could compensate for nowadays limitations of electrical circuits bandwidth by facilitating the signal processing parallelization. Photonic is particularly interesting for signal sampling thanks to available stable optical clocks. The heart of the present work concerns analog-to-digital conversion (ADC) as a key element in coherent detection. A prototype of linear optical sampling using an original solution for the optical sampling source, is built and validated with the successful equivalent time reconstruction of NRZ, QPSK and 16-QAM signals. Some optical and electrical limitations of the system are experimentally and numerically analyzed, notably the extinction ratio of the optical source or the ADC parameters (bandwidth, integration time, effective number of bits ENOB). Moreover, some new DSPs tools are developed for optical transmission using bi-dimensional modulation formats (amplitude and phase). Two solutions are proposed for IQ quadrature imbalance compensation in single carrier optical coherent transmission: an original method of maximum signal-to-noise ratio estimation (MSEM) and a new structure for joint compensation and equalization; these methods are experimentally and numerically validated with 16-QAM signals. Moreover, an improved solution for carrier recovery (frequency offset and phase estimation) based on a circular harmonic expansion of a maximum loglikelihood function is studied for the first time in the context of optical telecommunications. This solution which can operate with any kind of bi-dimensional modulation format signal is numerically validated up to 128-QAM. All the DSP tools developed in this work are finally used in a demonstration of a 10 Gbaud QPSK 100 km transmission experiment, featuring a strong non-linear phase noise limitation and regenerated using a phase preserving and power limiting function based on a photonic crystal nanocavity.