Open site measurement on the electromagnetic interference is the most direct and universally accepted standard approach for measuring radiated emissions from an equipment or the radiation susceptibility of a component or equipment. In general, if the NSA measurements we recorded at different frequencies do not exceed the ideal value +-4dB, we would regard this site as a normalized site, otherwise it is not a normalized site as long as there is one measurement exceeds the range. A one change point model had been used to fit observed measurements. For each set of observations as well as the corresponding ideal values, we have the estimated regression parameter for a one change point model. Our ideal is using the difference of regression parameters between ideal values and observations to assess whether a site is qualified for measuring EMI or not. The assessment tool for whether the testing site is normalized or not is referred to the confidence region for the regression model parameters. Finally, according to the data collected in this experiment, the estimated parameters obtained from the observations will be used to do further statistical analyses and comparing the qualities of the four different testing sites.

Very long and noisy sequence data arise from biological sciences to social science including high throughput data in genomics and stock prices in econometrics. Often such data are collected in order to identify and understand shifts in trends, for example, from a bull market to a bear market in finance or from a normal number of chromosome copies to an excessive number of chromosome copies in genetics. Thus, identifying multiple change points in a long, possibly very long, sequence is an important problem. In this article, we review both classical and new multiple change-point detection strategies. Considering the long history and the extensive literature on the change-point detection, we provide an in-depth discussion on a normal mean change-point model from aspects of regression analysis, hypothesis testing, consistency and inference. In particular, we present a strategy to gather and aggregate local information for change-point detection that has become the cornerstone of several emerging methods because of its attractiveness in both computational and theoretical properties.

Open site measurement on the electromagnetic interference is the most direct and universally accepted standard approach for measuring radiated emissions from an equipment or the radiation susceptibility of a component or equipment. A site is qualified for testing EMI or not is decided by the antenna measurements. In this work, we use data from setups with di erent factors to find relations of measurement and the situation of antenna. A one change point model has been used to fit observed measurements and compare the di erences with two kinds of antenna (broadband antenna and dipole antenna). However, with only one change point model it may not give a suitable fit for all data sets in this work. Therefore, we have tried other models and applied them to the data. Furthermore, we try to set up another standard more strict than ¡Ó4dB based on statistical inference results in deciding whether a site is a better one with more precision in measuring EMI values. Finally, a program by Matlab with a complete analysis based on the procedure performed here is provided, so that it may be used as a standard tool for evaluating whether a site is with good measurement quality in practice.

We provide a flexible means of estimating time-varying parameter models in a Bayesian framework. By specifying the state innovations to be characterized trough a threshold process that is driven by the absolute size of parameter changes, our model detects at each point in time whether a given regression coefficient is con stant or time-varying. Moreover, our framework accounts for model uncertainty in a data-based fashion through Bayesian shrinkage priors on the initial values of the states. In a simulation, we show that our model reliably identifies regime shifts in cases where the data generating processes display high, moderate, and low numbers of movements in the regression parameters. Finally, we illustrate the merits of our approach by means of two applications. In the first application we forecast the US equity premium and in the second application we investigate the macroeconomic effects of a US monetary policy shock. / Series: Research Report Series / Department of Statistics and Mathematics

We provide a flexible means of estimating time-varying parameter models in a Bayesian framework. By specifying the state innovations to be characterized trough a threshold process that is driven by the absolute size of parameter changes, our model detects at each point in time whether a given regression coefficient is constant or time-varying. Moreover, our framework accounts for model uncertainty in a data-based fashion through Bayesian shrinkage priors on the initial values of the states. In a simulation, we show that our model reliably identifies regime shifts in cases where the data generating processes display high, moderate, and low numbers of movements in the regression parameters. Finally, we illustrate the merits of our approach by means of two applications. In the first application we forecast the US equity premium and in the second application we investigate the macroeconomic effects of a US monetary policy shock. / Series: Department of Economics Working Paper Series

Statistical process control (SPC) is a toolbox to detect changes in the output of a process distribution. It can serve as a valuable resource to maintain high quality in a manufacturing process. This report is based on the work on evaluating and implementing methods for SPC in the process of chromatography instrument manufacturing at GE Healthcare, Umeå. To handle low volume and non-normally distributed process output data, non-parametric methods are considered. Eight control charts, three for for Phase I analysis, and five for Phase II analysis, are evaluated in this study. The usability of the charts are assessed based on ease of interpretation and the performance to detect distributional changes. The later is evaluated with simulations. The result of the project is the implementation of the RS/P-chart, suggested by Capizzi et al (2013), for Phase I analysis. Of the considered Phase I methods (and simulation scenarios), the RS/P-chart has the highest overall probability, of detecting a variety of distributional changes. Further, the RS/P-chart is easily interpreted, facilitating the analysis. For Phase II analysis, the use of two control charts, one based on the Mann-Whitney U statistic, suggested by Chakraborti et al (2008), and one on the Mood test statistic for dispersion, suggested by Ghute et al (2014), have been implemented. These are chosen mainly based on the ease of interpretation. To reduce the detection time for changes in the process distribution, the change-point chart based on the Cramer Von Mises statistic, suggested by Ross et al (2012), could be used instead. Using single observations, instead of larger samples, this chart is updated more frequently. However, this efficiently increases the false alarm rate and the chart is also considered much more difficult to interpret for the SPC practitioner. / Statistisk processkontroll (SPC) är en samling verktyg för att upptäcka förändringar, i fördelningen, hos utfallen i en process. Det kan fungera som en värdefull resurs för att upprätthålla en hög kvalitet i en tillverkningsprocess. Denna rapport är baserad på arbetet med att utvärdera och implementera metoder för SPC i en monteringsprocess av kromatografiinstrument på GE Healthcare, Umeå. Åtta styrdiagram, tre för för fas I analys, och fem för fas II analys, studeras i denna rapport. Användbarheten hos styrdiagrammen bedöms efter hur enkla de är att tolka och förmågan att upptäcka fördelningsförändringar. Den senare utvärderas med simuleringar. Resultatet av projektet är införandet av RS/P-metod, utvecklad av Capizzi et al (2013), för analysen i fas I. Av de utvärderade metoderna, (och simuleringsscenarier), har RS/P-diagrammet den högsta övergripande sannolikheten, för att upptäcka en mängd olika fördelningsförändringar. Vidare är metodens grafiska diagram lätt att tolka, vilket underlättar analysen. För fas II analys, har två styrdiagram, ett baserat på Mann-Whitney's U teststatistika, som föreslagits av Chakraborti et al (2008), och ett på Mood's teststatistika för spridning, som föreslagits av Ghute et al (2014), implementerats. Styrkan i dessa styrdiagram ligger främst i dess enkla tolkning. För snabbare identifiering av processförändringar kan styrdiagrammet baserat på Cramer von Mises teststatistika, som föreslagits av Ross et al (2012), användas. Baserat på enskilda observationer, istället för stickprov, har styrdiagrammet en högre uppdateringsfrekvens. Detta leder dock till ett ökat antal falska larm och styrdiagrammet anses dessutom vara avsevärt mycket svårare att tolka för SPC-utövaren.

Nous nous intéressons à des modèles statistiques pour les données indexées par des arborescences. Dans le contexte de l'équipe Virtual Plants, équipe hôte de cette thèse, les applications d'intérêt portent sur le développement de la plante et sa modulation par des facteurs environnementaux et génétiques. Nous nous restreignons donc à des applications issues du développement de la plante, à la fois au niveau microscopique avec l'étude de la lignée cellulaire du tissu biologique servant à la croissance des plantes, et au niveau macroscopique avec le mécanisme de production de branches. Le catalogue de modèles disponibles pour les données indexées par des arborescences est beaucoup moins important que celui disponible pour les données indexées par des chemins. Cette thèse vise donc à proposer un cadre de modélisation statistique pour l'étude de patterns pour données indexées par des arborescences. À cette fin, deux classes différentes de modèles statistiques, les modèles de Markov et de détection de ruptures, sont étudiées. / We address statistical models for tree-indexed data.Tree-indexed data can be seen as a generalization of path-indexed data since directed path graphs are directed tree graphs where there is at most one child per vertex.In the context of the Virtual Plants team, host team of this thesis, applications of interest focus on plant development and its modulation by environmental and genetic factors.We thus focus on plant developmental applications, both at the microscopic level with the study of the cell lineage in the biological tissue responsible for the plant growth, and at the macroscopic level with the mechanism of production of branches. The catalog of models available for tree-indexed data is far less important than the one available for path-indexed data.This thesis therefore aims at proposing a statistical modeling framework for studying patterns in tree-indexed data.To this end, two different classes of statistical models, Markov and change-point models, are investigated.

Ce travail est consacré aux problèmes d’estimation paramétriques, aux tests d’hypothèses et aux tests d’ajustement pour les processus de Poisson non homogènes.Tout d’abord on a étudié deux modèles ayant chacun deux sauts localisés par un paramètre inconnu. Pour le premier modèle la somme des sauts est positive. Tandis que le second a un changement de régime et constant par morceaux. La somme de ses deux sauts est nulle. Ainsi pour chacun de ces modèles nous avons étudié les propriétés asymptotiques de l’estimateur bayésien (EB) et celui du maximum de vraisemblance(EMV). Nous avons montré la consistance, la convergence en distribution et la convergence des moments. En particulier l’estimateur bayésien est asymptotiquement efficace. Pour le second modèle nous avons aussi considéré le test d’une hypothèse simple contre une alternative unilatérale et nous avons décrit les propriétés asymptotiques (choix du seuil et puissance ) du test de Wald (WT)et du test du rapport de vraisemblance généralisé (GRLT).Les démonstrations sont basées sur la méthode d’Ibragimov et Khasminskii. Cette dernière repose sur la convergence faible du rapport de vraisemblance normalisé dans l’espace de Skorohod sous certains critères de tension des familles demesure correspondantes.Par des simulations numériques, les variances limites nous ont permis de conclure que l’EB est meilleur que celui du EMV. Lorsque la somme des sauts est nulle, nous avons développé une approche numérique pour le EMV.Ensuite on a considéré le problème de construction d’un test d’ajustement pour un modèle avec un paramètre d’échelle. On a montré que dans ce cas, le test de Cramer-von Mises est asymptotiquement ”parameter-free” et est consistent. / This work is devoted to the parametric estimation, hypothesis testing and goodnessof-fit test problems for non homogenous Poisson processes. First we consider two models having two jumps located by an unknown parameter.For the first model the sum of jumps is positive. The second is a model of switching intensity, piecewise constant and the sum of jumps is zero. Thus, for each model, we studied the asymptotic properties of the Bayesian estimator (BE) andthe likelihood estimator (MLE). The consistency, the convergence in distribution and the convergence of moments are shown. In particular we show that the BE is asymptotically efficient. For the second model we also consider the problem of asimple hypothesis testing against a one- sided alternative. The asymptotic properties (choice of the threshold and power) of Wald test (WT) and the generalized likelihood ratio test (GRLT) are described.For the proofs we use the method of Ibragimov and Khasminskii. This method is based on the weak convergence of the normalized likelihood ratio in the Skorohod space under some tightness criterion of the corresponding families of measure.By numerical simulations, the limiting variances of estimators allows us to conclude that the BE outperforms the MLE. In the situation where the sum of jumps is zero, we developed a numerical approach to obtain the MLE.Then we consider the problem of construction of goodness-of-test for a model with scale parameter. We show that the Cram´er-von Mises type test is asymptotically parameter-free. It is also consistent.