Green chemistry principles have been applied to the enhancement of two industrial chemistry problems. An industrially used reaction to form alcohols from aldehydes and ketones, the Meerwein-Ponndorf-Verley reduction, was improved by introducing a new catalyst Al(OtBu)₃. Due to the lower state of aggregation of this catalyst versus the conventional Al(OiPr)₃ catalyst, reduction rates were found to be faster in both pure iPrOH and mixed solvent systems for three model compounds: benzaldehyde, acetophenone, and a complex, chiral ketone, (S)-CMK. This allowed for the successful implementation of two important milestones; lowering the amount of catalyst needed necessary to complete the reactions (an economic benefit and lower waste) and the conversion from traditional batch reactions to continuous flow (a processing benefit) whereby reactions can be scaled-out rather than scaled-up. Another industrially important field of research that was focused on was CO₂ capture. High energy demands from current CO₂ capture methods such as aqueous amine solvents, specifically from coal-fired power plant flue gas, led to the development of non-aqueous reversible ionic liquids based on silylated amines. Structural modifications of the substitution around the silicon atom, the length of the alkyl chain bonding the silicon and amine, branching along the alkyl backbone, and investigating secondary and primary amines within this class of silylated amines were completed. These amines were reacted with CO₂ and the CO₂ capacity, the ionic liquid viscosity, reversal temperature and reaction enthalpy were all considered as a function of structure. In all cases the capacity was found to be not only greater than that of monethanolamine, an industrial standard, but higher than theoretical predictions through the formation of carbamic acid. Viscosity, reversal temperature, and reaction enthalpy were all found to be tunable through structure. These modifications gave significant insight into the necessary direction for optimization of these solvents as energy-efficient replacements of current CO₂ capture technology.

Homogenous acid catalysts are prevalent throughout the chemical industry but all have the drawback of requiring post reaction neutralization and subsequent downstream removal of the product salt. The use of a base to neutralize the acid and the processing of the salt are ancillary to the process and the disposal of the salt is an environmental concern. The work presented here shows the use of alkylcarbonic acids, which form in situ with CO₂ pressure and neutralize on loss of CO₂ pressure rather than requiring a base. Thus CO₂ can be used to "switch" the acid on and off. The properties of alkylcarbonic acids are explored to gain understanding of the mechanisms by which they act. The acids are also used to catalyze the synthesis of α-pinene, methyl yellow, and benzyl iodide. These reactions are examples of common acid catalyzed reactions where this technology could be implemented. The second half of the work explores two other "switches". The first is using temperature to break an emulsion with a novel thermally cleavable surfactant. This technology has potential applications in a wide range of fields where surfactants are used including polymerization, oil recovery, and biosynthesis. The second is using CO₂ to liquefy a solid ionic compound to allow its use as a solvent. This would greatly increase the number of ionic species available for use in ionic liquid-CO₂ biphasic systems.

Vinyltrialkoxysilanes are grafted onto polyolefins via a radical mechanism; in a subsequent step, the pendant alkoxysilanes hydrolyze and condense upon exposure to water, resulting formation of crosslinks. Straight chain hydrocarbons were used as model compounds to investigate the regioselectivity of vinyltrimethoxysilane grafting. To stabilize the water-sensitive grafted products, the methoxy groups were substituted using phenyllithium. It was found that this reaction must be carried out for a minimum of three days to ensure full substitution. The grafted products were then separated on a weight basis using semi-preparative HPLC. Analysis of the di-grafted fraction using edited HSQC and HSQC-TOCSY NMR showed that radical propagation occurs via 1,4- and 1,5-intramolecular hydrogen shifts along the hydrocarbon backbone, resulting in multiple grafts per backbone. Post-combustion carbon capture targets CO₂ emissions from large point sources for capture and sequestration. A new class of potential carbon capture agents known as reversible ionic liquids (RevILs) has been synthesized and evaluated in terms of potential performance parameters (e.g. CO₂ capacity, viscosity, enthalpy of regeneration). These RevILs are silylated amines, which react with CO₂ to form a salt comprising an ammonium cation and a carbamate anion that is liquid at room temperature. Structural modifications of the basic silylamine skeleton result in drastic differences in the performance of the resulting RevIL. Systematic variation of the silylated amines allowed determination of a structure-property relationship, and continued iterations will allow development of an ideal candidate for scale-up. The properties and potential applications of gold nanoparticles (AuNP) are highly dependent on their size and shape. These properties are commonly controlled during liquid-phase synthesis through the use of capping agents, which must be removed following synthesis. Reverse micelles can also be used to control the morphology of AuNP during their synthesis. When RevILs are used in the formation of these reverse micelles, either as the disperse phase or as the surfactant, the built-in switch can be used to release the nanoparticles following their synthesis. This release on command could decrease the post-synthetic steps required to clean and purify AuNP prior to use. We have successfully synthesized AuNP using a number of different RevILs.

Laccase (benzenediol:oxygen oxidoreductase, EC 1.10.3.2), a multi-copper-containing oxidoreductase enzyme, is able to catalyze the oxidation of various low-molecular weight compounds, specifically, phenols and anilines. Due to their high stability, selectivity for phenolic substructures, and mild reaction conditions, laccases are attractive for fine chemical synthesis. In this study, new green domino syntheses were developed by conducting the reaction in an aqueous medium, an environmentally-friendly solvent, and using laccase as a biocatalyst. The first study presents a work on the synthesis of naphthoquinones in the aqueous medium. Herein, laccase was used to oxidize o- and p-benzenediols to generate o- and p-benzoquinones in situ. These quinones then underwent Diels-Alder and oxidation reactions to finally generate napthoquinone products. This reaction system can yield naphthoquinones in up to 80% yield. The next part of this thesis reports the cascade synthesis of benzofuran derivatives from the reaction of catechols and 1,3-dicarbonyl compounds via oxidation-Michael addition in the presence of laccase and Sc(OTf)3/SDS in an aqueous medium. Depending on the substrates, one-pot yields of benzofurans averaged 50-79%. From an environmental concern, this system still produced a hazardous waste from the transition metal catalyst. Therefore, the development of alternative methodologies to replace the lanthanide metal catalyst in this synthesis is a high priority to enhance the overall green chemistry aspect. As a consequence, lipase was used as a catalyst to replace Sc(OTf)3 for the synthesis of benzofuran derivatives. In addition, this catalytic system was also used to catalyze the reaction of anilines and catechol. In the last part of this thesis, laccase was applied to the modification of high-lignin softwood kraft pulp. This modification demonstrates the potential of laccase-facilitated grafting of amino acids to high lignin content pulps to improve their physical properties in paper products which resulted from the increase of carboxylic acid group of the fibers. In this study, a variety of amino acids were examined. Laccase-histidine treatment provided the best yield of acid groups on pulp fiber and was used in the preparation of handsheets for physical strength testing. Laccase-histidine-treated pulp showed an increase in the strength properties of the resulting paper.