The present Master´s thesis deals with the concept of press drive of Blanking press LKDS 800 used for blanking in automatic blanking line. The first part of the thesis is dedicated to the individual arrangements of press drives and servo press drives and to the description of main components. The second part of this thesis deals with the structural design of the drive. Based on the computation of the crank mechanism, several design solutions were suggested. From these solutions, the option with the lowest drive height is selected. This option, offers the computation of the main drive, flywheel, spur gearing and clutch/brake combination. This computation is followed by computations of individual construction nodes, which include a design and dimensioning of the individual joggles, shafts and bearings. The drawing of the press and clutch shaft assemblies with a list of items are also included.

Master’s thesis deals with the design of the drive of the press LKJP 630, the configuration is a fixed range by the construction of LKJP. The thesis was ordered by partnership with company ŽĎAS, which is introduced. The first part is devoted to analysis of solved problems, it primarily contains the overview on forming machines, used drives and a description of their main parts. The second part deals with the drive itself, there is accomplished the design and performed the strength analysis of the major parts of the drive. Drawing documentation and bill of materials are included.

The aim of this diploma thesis is to design the control picking unit for the storage system Multitower. This work deals with the storage of rods, safety requirements and design of structures. The design part solves the actuator design, choice of chain tensioning system and torque transmission. The strength analysis of important components is solved in last part.

Seit einigen Jahren hat sich Mathcad als universelle Mathematiksoftware an vielen Universitäten, Instituten und in Unternehmen bewährt. An der Professur Maschinenelemente der TU Chemnitz wird Mathcad derzeit u.a. bei der Entwicklung einer vollkommen neuartigen Riemenscheibenkupplung für PKW-Kältemittelverdichter eingesetzt. Hierfür wurde ein mathematisches Modell entwickelt, mit dem sich die Bauteilbelastungen sowie die dynamischen Vorgänge in der Kupplung simulieren lassen. Bei der Analyse und Optimierung solcher technischen Systeme besteht häufig der Wunsch, die Bewegung der Bauteile und die wirkenden Kräfte direkt in Mathcad dreidimensional zu visualisieren, ohne dass dafür ein CAD-System benötigt wird. Im Vortrag werden benutzerfreundliche Funktionen präsentiert und anhand einiger Beispiele live vorgeführt, mit denen dies möglich ist. Des Weiteren wird gezeigt, wie diese Funktionen bei der Entwicklung der genannten Riemenscheibenkupplung eingesetzt wurden.

Plankerbverzahnungen zählen zu den Vertretern der Kupplungsverzahnungen, mit deren Hilfe zwei Bauteile koaxial miteinander verbunden werden können. Neben einer hohen Winkelgenauigkeit zeichnen sie sich durch eine enorme Drehmomentkapazität bei gleichzeitig geringem Montageaufwand aus. Die zur Leistungsübertragung erforderliche Vorspannkraft kann über eine zentrale Spannschraube oder mehrere dezentral, auf einem gemeinsamen Teilkreis, angeordnete Spannschrauben erzeugt werden. Diese Arbeit liefert einen Beitrag zur beanspruchungsgerechten Dimensionierung von Plankerbverzahnungen mit zentraler und dezentraler Verschraubung. Es wird eine Berechnungsmethode zur Bestimmung der Tragfähigkeit des Zahnfußes, der Zahnflanke und der Spannschrauben vorgestellt und anhand von Beispielrechnungen erläutert. Neben den umfangreichen theoretischen Betrachtungen werden die Ergebnisse zahlreicher experimenteller Untersuchungen präsentiert. Diese dienen der Gewinnung von grundlegenden Aussagen zur Stützwirkung und zum Mittelspannungseinfluss an einfach und mehrfach gekerbten Proben sowie zur Verifizierung des Tragfähigkeitsnachweises.

Trade-off between offspring size and number belongs to the most discussed concepts in the life history theory. The aim of this study was to elucidate the relationship between egg size, clutch size and female body mass at the family level in bird's and to examine whether there is the relationship between offspring size and number and life history traits specific for particular bird families. From published sources, I collected data about 5.073 species belong in 146 families. Most species of birds lay smaller clutches, on average three eggs. In 112 families from 130 tested eggs size was positively correlated with female body mass. There is evidence that egg size and clutch size are inversely related in 83 families from 130 tested but only for 34 families was significant. The relationship exists independently of female body mass across bird families and this suggests a trade-off between these traits. The relationship between the strength and shape of egg size-number correlations and life history characteristics of bird families was not frequent. According to results, the strength of correlation seems to be related to development mode and diet type. The negative egg size-number correlation is stronger when incubation period and fledging time is longer and in birds with longer lifespan. The...

Pressure reducing valves perform various control tasks in mobile machines. In many cases contamination sensitive environments require pilot-operated valves, because of its more robust performance. On the other hand, dynamic valve behavior can be critically in certain applications. Overcoming the restrictions resulting from stand-alone test rig attempts, suitable simulation principles are nowadays the state of art in valve design. Unsuitable model approaches and missing consideration of the application may result in wrong design decisions. This paper discusses two important modeling issues, in particular the solenoid and spool leakage behavior, in combination with the connected system under control, a pressure-actuated clutch. It is shown, that even for standard proportional valves a critical view on customers´excitation strategy and site of installation decides on success or failure of an already used design variant.

This thesis is concerned with design of pedal box for Formula Student vehicle. Summary of design solutions is presented in introductory chapter, especially those used in Formula Student competition. Designed assembly is divided into parts of single pedals and base plate. The proposed design is supported by stress analysis of loaded parts in pedal box. In conclusion, design is reviewed in terms of the results, as well as compared with current pedal box.

Existing classes of centrifugal clutch concepts were reviewed. The pseudo-rigid-body model (PRBM), rigid-body replacement synthesis, force-deflection analysis, compliance potential evaluation, and compliant concept evaluation were used to develop effective new centrifugal clutch concepts. These methods helped develop and model four novel compliant centrifugal clutch designs, model two existing designs, and identify a concept with excellent potential for low-cost centrifugal clutch applications. This concept, the floating opposing arm (FOA) clutch, doubles the torque capacity metric relative to existing compliant designs. Torque and engagement speed models for this clutch were developed and verified against four prototype clutches. Additional novel designs devel-oped through this work have lower torque capacities, but also show good potential because of other unique characteristics. All of the designs were prototyped and tested to measure their torque-speed relationships.

As the need for highly efficient transmission systems increase, it is imperative to have lower fuel consumption levels. Hence, it becomes crucial to investigate and understand reasons behind various losses occurring within the system. Clutches and gears contribute to the major losses within a transmission system. In this thesis project, the drag losses in disengaged wet clutch is studied and efforts have been made to come up with solutions to reduce these losses. Computational Fluid Dynamics (CFD) is used as tool to understand the oil flow in the clutch system. The thesis tasks focused on: - Better understanding of flow physics and oil inlet to the clutch pack - Design and analysis of groove patterns to reduce drag loss - Understand the effect of rotation of clutch discs on groove functionality - Development of a multiphase CFD model with realistic boundary conditions for clutch analysis Initially, the entire clutch pack is modelled to study the oil flow and estimate the amount of oil that is being pumped into the individual gaps between the steel plates and friction discs. To analyze different groove patterns, the clutch model was simplified and only the gap having higher mass flow rate has been considered for simulation. A background study has been done to understand the effect of different clutch parameters on drag losses. Based on the understanding from the literature study, two groove patterns- inclined grooves and waffle grooves have been designed and analyzed in this thesis work. A simplified model with periodic boundary condition and a complete single disc model have been set up and simulated to compare the two groove patterns. To reduce the computational time, at first, a periodic model is set up for groove study. Due to numerical instability observed in the results obtained by using model with periodic boundary condition, the complete single disc model is used for further groove study and comparison. To understand the effect of rotation on grooves, two models have been set up, one with stationary grooves and the other with rotating grooves. While performing the simulations, the temperature and the oil properties have been considered constant. As there were no test results available, the CFD results could not be validated. Convective heat transfer coefficient is estimated to compare the cooling effect of different grooves. An optimal groove pattern would be the one that dissipates oil faster and efficiently out of the clutch pack, and at the same time has better cooling effect. From the results obtained, the inclined grooves were more efficient than waffle grooves in dissipating oil and reducing drag losses. On the other hand, waffle grooves have higher convective heat transfer coefficient when compared to inclined grooves and are better for cooling. / På grund av de ökande kraven på transmissionssystemen är det av stort intresse att även öka deras verkningsgrad för att uppnå lägre bränsleförbrukning. Det blir då viktigt att förstå orsakerna bakom de förluster som uppstår inom systemet. Kopplingar och växlar bidrar till de största förlusterna inom ett transmissionssystem. I denna avhandling studeras strömningsförlusterna i en frånkopplad våtkoppling och försök görs att hitta lösningar för att minska dessa förluster. Computational Fluid Dynamics (numeriska flödesberäkningar) används som ett verktyg för att förstå oljeflödet i kopplingssystemet. Avhandlingens fokus ligger på följande områden: - Förbättra förståelsen för flödesfysik och oljetillförsel till kopplingspaketet - Design och analys av spårmönster för att minska strömningsförluster - Förstå effekten av kopplingsskivornas rotation på spårens funktion - Utveckling av en flerfas CFD-modell med realistiska randvillkor för kopplingsanalys Först modelleras hela kopplingspaketet för att studera oljeflödet och beräkna mängden olja som pumpas in i mellanrummen mellan stålplattorna och friktionsskivorna. För att analysera olika spårmönster förenklades kopplingsmodellen och endast det mellanrum med högst massflödeshastighet har beaktats för simulering. En bakgrundsstudie har gjorts för att förstå effekten av olika parametrar på strömningsförlusterna. Baserat på förståelsen från litteraturstudien har två spårmönster – lutande spår och våffelspår, utformats och analyserats i detta arbete. En nedskalad periodisk modell och en komplett enkelskivsmodell har skapats och simulerats för att jämföra de två spårmönstren. För att minska beräkningstiderna för simuleringarna, användes en periodisk modell för spårgeometristudien. På grund av numerisk instabilitet som observerades i resultaten från den periodiska modellen används den kompletta enkla skivmodellen för ytterligare analys och jämförelse. För att förstå rotationseffekten på spåren har två modeller upprättats, en med stationära spår och en med roterande spår. Under simuleringen har temperaturen och oljeegenskaperna antagits vara konstanta. Eftersom det inte fanns några testresultat tillgängliga kunde CFD-resultaten inte verifieras. Den konvektiva värmeöverföringskoefficienten uppskattades för att kunna jämföra hur kylförmågan påverkas av olika spårgeometrier.  Ett optimalt spårmönster bör utformas sådant att det minskar förlusterna genom att skingra oljan snabbt och effektivt i hela kopplingspaketet, och samtidigt ger en bättre kylningseffekt. Enligt de erhållna resultaten var de lutande spåren effektivare än våffelspår i att skingra olja och reducera strömningsförluster. Å andra sidan ger spår med våffelmönster en högre konvektiv värmeöverföringskoefficient jämfört med lutande spår och därmed förbättrad kylförmåga.