As America's infrastructure ages, many of the nation's bridges approach the end of their service life. In order to develop a method for handling the rising number of deficient and functionally obsolete bridges, nondestructive tests and evaluations must be undertaken. Valuable information from these tests regarding the strength and condition of bridges will help in making decisions about their rehabilitation and replacement. Two adjoining open spandrel reinforced concrete arch bridges in downtown Appalachia, Virginia were selected for live load testing by Virginia Department of Transportation (VDOT). Both bridges have supported an increasing amount of extreme coal truck traffic throughout their service life and are essential to the efficient transport of coal in the region. Because of their age, having been built in 1929, and the amount of visible damage and repairs, VDOT was concerned about their remaining capacity and safe operation. The live load tests focused on global behavior characteristics such as service strain and deflection as well as local behavior of the arches surrounding significant repairs. It was found that the strain and deflection data collected during load testing displayed linear elastic behavior, indicating excess capacity beyond the test loads. Also, given the loading applied, the measured strains and deflections were small in magnitude, showing that the bridges are still acting as stiff structures and are in good condition. Data collected during these tests was compared to results from a finite element model of the bridges to determine the coal truck size which is represented by the live load test loading configurations. The model comparisons determined the test loads produced comparable deflections to those produced by the target coal truck load. Through this approach, a recommendation was given to VDOT regarding the satisfactory condition of the aging bridges to aid in the process of load rating and maintenance scheduling for the two bridges. / Master of Science

The work presented in this thesis comprises the assessment of existing arch bridges with overlying backfill. The main objective is to estimate the load carrying capacity in ultimate limit state analysis. A case study of the old Årsta railway bridge is presented, serving as both the initiation and a direct application of the present research. The demand from the bridge owner is to extend the service life of the bridge by 50 years and increase the allowable axle load from 22.5 to 25 metric tonnes. The performed analyses show a great scatter in estimated load carrying capacity, depending on a large number of parameters. One of the factors of main impact is the backfill material, which may result a significant increase in load carrying capacity due to the interaction with the arch barrel. Based on theoretical analyses, extensive conditional assessments and the demand from the bridge owner, it was decided that the bridge needed to be strengthened. The author, in close collaboration with both the bridge owner and the persons performing the conditional assessment, performed the development of a suitable strengthening. The analyses showed a pronounced three-dimensional behaviour, calling for a design using non-linear finite element methods. Due to demands on full operability during strengthening, a scheme was developed to attenuate any decrease in load carrying capacity. The strengthening was accepted by the bridge owner and is currently under construction. It is planned to be finalised in 2012. The application of field measurements to determine the structural manner of action under serviceability loads are presented and have shown to be successful. Measured strain of the arch barrel due to passing train has been performed, both before, during and after strengthening. The results serve as input for model calibration and verification of the developed strengthening methods. The interaction of the backfill was not readily verified on the studied bridge and the strengthening was based on the assumption that both the backfill and the spandrel walls contributed as dead weight only. The finite element models are benchmarked using available experimental results in the literature, comprising masonry arch bridges with backfill loaded until failure. Good agreement is generally found if accounting for full interaction with the backfill. Similarly, accounting for the backfill as dead weight only, often results in a decrease in load carrying capacity by a factor 2 to 3. Still, several factors show a high impact on the estimated load carrying capacity, of which many are difficult to accurately assess. This suggests a conservative approach, although partial interaction of the backfill may still increase the load carrying capacity significantly. / Arbetet i föreliggande avhandling omfattar analyser av befintliga bågbroar med ovanliggande fyllning. Huvudsyftet är att uppskatta bärförmågan i brottgränstillstånd. En fallstudie av gamla Årstabron redovisas, vilken utgör både initieringen och en direkt tillämpning av föreliggande forskning. Kravet från broförvaltaren är att öka brons livslängd med 50 år, samtidigt som axellasten ska ökas från nuvarande 22.5 ton till 25 ton. Utförda analyser visar på stor spridning i uppskattad bärförmåga, beroende på ett stort antal parametrar. En av de främsta faktorerna är fyllningens egenskaper, vilken kan resultera i en markant ökning av bärförmågan p.g.a. samverkan med bågen. Baserat på teoretiska analyser, tillståndsbedömningar och krav från broförvaltaren beslutades att bron skulle förstärkas. En förstärkningsmetod har utvecklats i nära samarbete med broförvaltaren och personer som tidigare utfört tillståndsbedömningarna. Analyserna visar ett utpräglat tredimensionellt beteende, vilket har föranlett användandet av icke-linjära finita elementmetoder. Krav på full trafik under samtliga förstärkningsarbeten har resulterat i att dessa utförs enligt en föreskriven ordning, som ska reducera minskning i bär­förmåga under samtliga etapper. Förstärkningsförslaget godkändes av Banverket och är för närvarande under byggnation. Enligt plan ska dessa slutföras under 2012. Fältmätningar har använts för att bestämma det statiska verkningssättet under brukslaster, vilket visas ge goda resultat. Resulterande töjningar från passerande tåg har uppmäts i bågen, både före, under och efter förstärkning. Resultaten har använts både för att kalibrera beräkningsmodeller och att verifiera utförda förstärkningar. Samverkan mellan båge och fyllning har inte kunnat verifierats för den aktuella bron och de utvecklade förstärkningarna baseras på en modell där både fyllning och sidomurar endast utgör yttre verkande last. De framtagna finita element modellerna har jämförts med experimentella resultat från litteraturen, omfattande tegelvalvsbroar med ovan­liggande fyllning belastade till brott. Generellt erhålls god överensstämmelse om full samverkan mellan båge och fyllning antas. Om fyllningen istället endast betraktas som yttre last, minskar lastkapaciteten ofta med en faktor 2 till 3. Fortfarande uppvisar ett antal faktorer stor inverkan på bärförmågan, vilka ofta är svåra att med säkerhet bestämma. Ett konservativt betraktningssätt rekommenderas, även om delvis sam­verkan med fyllningen fortfarande kan öka bärförmågan avsevärt. / QC 20110426