The aim of this thesis is design of an apartment building for students. The design is in the range of the documentation for designing building construction based on the decree 499/2006 Sb. as amended by decree 62/2013 Sb. The building is situated on the plots 1220, 1219/1, 1218/11 and 1218/2 in the cadastral area „Letovice“. The new building is designed to accommodate students for year-round occupancy. There is a dining room for staying students and students from nearby schools as well. In the new building are also multimedia classrooms, library, reading rooms, club rooms, gym and lecture hall available for students. In the building are 30 rooms. The capacity of the building is designed to accommodate 81 students. The building has three floors, a loft and no basement. Masonry is designed from clay blocks and floor slab is designed as a cast-in-place reinforced concrete floor structure.

The project involves the design and solution of restaurant with microbrewery and accommodations. This is a new building on the land plot no. 2739, which is located in Golčův Jeníkov and situated in the middle of plat. Entrance to object and disposition inside the building is has barrier-free solution. Restaurant with microbrewery is designed for a capacity of 120 people in restaurant and 30 places to sit in lounge bar. Total capacity of boarding house is 21 beds. One double room is designed has barrier-free solution. Structural system of restaurant with microbrewery is combined, which is formed in one part of precast concrete frame S 1.2 and in other part of wall structural system. They are designed reinforced concrete columns about dimensions 0,4x0,4 m with axial distance 6x8 m. Masonry part of the building and infill wall in above-ground floors is lined with ceramic blocks of the type therm. Infill wall in the basement is formed of permanent formwork. The building is insulated a contact thermal insulation with an insulation of thickness 130 mm. Internal loadbearing and non-load-bearing wall in basement and in first floor are lined with ceramic blocks type therm and in second floor they are designed plasterboard partitions. The building is covered with a warm flat roof. Loadbearing structure of roof and ceilings structure are formed prestressed concrete floor slabs SPIROLL. Floor assembly is burdened with river stones of thickness 120 mm.

The subject of diploma thesis is processing of the desing documentation for new multifunctional building in the street Dělnická, cadastre unit Komín, Brno - Komin. The building is a 3 floors and one underground floor and is designed as a last building in the street on the nearly flat land. In the building is located non-residential space, dwelling units and studios. Non-residential space comprise seven parking spaces in a public underground garage, two stores barrier-free solution with the facilities and two studios 1 + 1. The residential part has two dwelling units 1 + kk, two dwelling units 2 +1 and two dwelling units 4 + kk. The building is based on a waterproof concrete structure "white tub". The vertical structure is built of clay blocks Porotherm, horizontal structures are cast-in-place reinforced concrete. The exterior building envelope is completed with thermal insulation. An internal staircase is cast-in-place reinforced concrete. The entrance to the garage for cars is possible by Autolift. The building is roofed with warm flat roof. The drawings are processed in AutoCAD software visualization are processed in Sketch Up

The subject of this diploma thesis is the design of a new library and the elaboration of project documentation for the construction. The library is located on the outskirts of the village Jiříkovice on a flat plot. The building is designed as a detached building with an underground floor and two above-ground floors. The individual floors are connected by staircases and a lift. The above-ground part of the building contains library, office part and café. The underground part of the building contains archive, stores and technical facilities. The structural system of a building is designed from cast-in-place concrete frame with filling from ceramic blocks. Horizontal structural system is from cast-in-place reinforced concrete point-supported slabs. Part of facade is from wood and part is with contact thermal insulation system with mineral wool insulation. Roof construction is designed as flat green roof.

The subject of the final thesis is the elaboration of design documentation for the new construction of an accommodation facility, specifically a boarding house intended for recreation. The new building is located in the cadastral area of ??the village Vernířovice. It is a building with three floors above ground and one underground floor. The building is based on foundation strips made of plain concrete and a foundation slab made of reinforced concrete. The vertical load-bearing structures are made of cley blocks and blocks of permanent formwork. Horizontal load-bearing structures are made of reinforced concrete. The roof structure is saddle with elongated dormers.

The subject of this diploma thesis is the project documentation of the new building - pension U Odry in Přerov-Kozlovice. Accommodation capacity is 36 people. In the pension there is also restaurant. The building is designed as a three-storey. On the first floor there are rooms for guests entering the accommodation facility, facilities for accommodation, technical facilities of the building and the restaurant, including premises for its operation. There are guest rooms on the second and third floors. The bases are made up of strip foundations. The external loadbearing mansards and partitions are made of YTONG lightweight concrete blocks. The internal loadbearing masonry is made of SILKA lime-sand blocks. The ceiling structure is designed from SPIROLL prestressed concrete floor slab. The roofing of the building is solved using flat vegetation roofs.

The subject of the diploma thesis is the design documentation for the construction of low-energy building. This is a hotel komplex, which is located in the city of Brno-Bohunice. The hotel has four floors, no basement and a warm flat roof. On the ground floor there is a hotel restaurant with facilities for employees, main hall, social facilities, wellness and technical facilities. The part of first floor consists of conference halls and a gym. In other parts of hotel are designed 47 guest rooms. Two guest rooms are for people with reduced mobility. The accommodation capacity of the hotel is 82 people. There are uncovered parking spaces for cars and one bus, tennis courts and a hotel garden on the plot. The structural system is combined with reinforced concrete columns and brick blocks. Horizontal structures are designed as cast-in-place reinforced concrete floor. The construction is based on foundation pad and strip foundation. The external wall is built from hollow clay blocks and insulated with external thermal insulation composite systém. The diploma thesis is processed to the extent of design documentation for construction.

This aim of the diploma thesis is the design of hotel with restaurant, outdoor parking and garage in Brno - Kníničky, Hrázní street on sloping plot no. 3570 and 3571. The hotel is with partial basement and has five above-ground floors. The total capacity of the hotel is 99 guests in 50 guest rooms. Structural systém is cast-in-place concrete frame. Infill wall are from clay masonry Heluz. Partition is from plasterboard partition. External wall are with contact thermal insulation system. Part of the external wall have ventilated facade. Floor structure is from cast-in-place reinforced concrete floor. The roof is green roof. The outdoor parking consists of ten parking spaces, fice of which are barrier-free for people with reduced mobility. Residue parking spaces are in the garage opposite the hotel. From the side of the hotel are parking spaces for hotel staff. On plot are designed playground.

The Master´s thesis subject is a design and an estimation of the load-bearing structure of a multi-storeyed building. The structure has a miscellaneous ground-plan shape consisting of three rectangular tracts and it is placed in the building basement under the ground level. The load-bearing structure involves walls and a floor slab which rises up vertically closer to the ground level in the central tract. Among further components being solved belong stairs, basement slab and beam. The load-bearing structure is solved monolithically as steel concrete component.

This diploma thesis focuses on the design of a new kindergarten building located on a slightly sloping plot in Dubňany, South Moravia. Functionally it is possible to divide the kindergarten into three parts - administration, education and technical facilities. There are two classes, each for 24 for children, a separate common room and a pottery class. The total capacity of the kindergarten is 48 children. It is designed as a single-storey building with a green flat roof and without a basement. It is based on concrete foundation strips. Loadbearing mansory is made of sand-lime blocks, partitions are made of sand-lime blocks and aerated concrete blocks, ceiling is made of prestressed hollow core slabs. The walls are insulated with a combination of contact thermal insulation system and ventilated facade with facade cladding of fibre-cement board and timber cladding. Atypical round windows were use as a fun detail for the both classrooms and the common room.