Spelling suggestions: "subject:"continuoustime filters."" "subject:"continuoustime filters.""
1 |
Accurately tunable low-voltage continuous-time filters /Vemulapalli, Gowtham. January 1900 (has links)
Thesis (M.S.)--Oregon State University, 2004. / Typescript (photocopy). Includes bibliographical references (leaves 77-79). Also available on the World Wide Web.
|
2 |
Energy-Efficient Time-Based Encoders and Digital Signal Processors in Continuous TimePatil, Sharvil Pradeep January 2017 (has links)
Continuous-time (CT) data conversion and continuous-time digital signal processing (DSP) are an interesting alternative to conventional methods of signal conversion and processing. This alternative proposes time-based encoding that may not suffer from aliasing; shows superior spectral properties (e.g. no quantization noise floor); and enables time-based, event-driven, flexible signal processing using digital circuits, thus scaling well with technology. Despite these interesting features, this approach has so far been limited by the CT encoder, due to both its relatively poor energy efficiency and the constraints it imposes on the subsequent CT DSP. In this thesis, we present three principles that address these limitations and help improve the CT ADC/DSP system.
First, an adaptive-resolution encoding scheme that achieves first-order reconstruction with simple circuitry is proposed. It is shown that for certain signals, the scheme can significantly reduce the number of samples generated per unit of time for a given accuracy compared to schemes based on zero-order-hold reconstruction, thus promising to lead to low dynamic power dissipation at the system level.
Presented next is a novel time-based CT ADC architecture, and associated encoding scheme, that allows a compact, energy-efficient circuit implementation, and achieves first-order quantization error spectral shaping. The design of a test chip, implemented in a 0.65-V 28-nm FDSOI process, that includes this CT ADC and a 10-tap programmable FIR CT DSP to process its output is described. The system achieves 32 dB – 42 dB SNDR over a 10 MHz – 50 MHz bandwidth, occupies 0.093 mm2, and dissipates 15 µW–163 µW as the input amplitude goes from zero to full scale.
Finally, an investigation into the possibility of CT encoding using voltage-controlled oscillators is undertaken, and it leads to a CT ADC/DSP system architecture composed primarily of asynchronous digital delays. The latter makes the system highly digital and technology-scaling-friendly and, hence, is particularly attractive from the point of view of technology migration. The design of a test chip, where this delay-based CT ADC/DSP system architecture is used to implement a 16-tap programmable FIR filter, in a 1.2-V 28-nm FDSOI process, is described. Simulations show that the system will achieve a 33 dB – 40 dB SNDR over a 600 MHz bandwidth, while dissipating 4 mW.
|
3 |
Delta-sigma modulators employing continuous-time circuits and mismatch-shaped DACsZhang, Bo 03 April 1996 (has links)
Delta-sigma modulators are currently a very popular technique for making high-resolution
analog-to-digital and digital-to-analog converters. These oversampled data
converters have several advantages over conventional Nyquist-rate converters, including
an insensitivity to many analog component imperfections, a simpler antialiasing filter and
reduced accuracy requirements in the sample and hold. Though the initial uses of delta-sigma
modulators were in the audio field, the development of bandpass modulators opened
up the application range to radar systems, digital communication systems and instruments
which convert IF, or even RF, analog signals directly to digital form.
This thesis presents a method used to analyze and synthesize continuous-time
delta-sigma modulators for given specifications. A fourth-order prototype continuous-time
bandpass delta-sigma modulator employing g[subscript m]-LC resonator structure is demonstrated on
a PCB board and measurement results corroborate the theory. To allow the construction of
very high performance delta-sigma modulators, this thesis presents an architecture for a
multibit DAC constructed from unit elements which shapes element mismatches. Theoretical
analysis and simulation shows that this architecture greatly increases the noise attenuation
in the band-of-interest and facilitates the use of multibit quantization in delta-sigma
modulators. The methods presented in this thesis will allow high-frequency wideband
bandpass delta-sigma modulators to be constructed. / Graduation date: 1996
|
4 |
Robust filtering / Garry Allan Einicke.Einicke, Garry Allan January 1995 (has links)
Includes bibliographical reference. / viii, 149 leaves : ill. ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / This study is concerned with filters that are robust to uncertainties in either the signal models or the noise statistics. Extensions to an interpolation approach to solving a continuous-time, linear, stationary filtering problem are presented. A robust extended Kalman filter is developed. / Thesis (Ph.D.)--University of Adelaide, Dept. of Electrical and Electronic Engineering, 1996?
|
5 |
A multi-bit hybrid DSM over full-scale range without feedback DEM /Kwon, Sunwoo, January 1900 (has links)
Thesis (Ph. D.)--Oregon State University, 2009. / Printout. Includes bibliographical references (leaves 65-68). Also available on the World Wide Web.
|
6 |
Continuous time input pipeline ADCs /Gubbins, David Patrick. January 1900 (has links)
Thesis (Ph. D.)--Oregon State University, 2009. / Printout. Includes bibliographical references (leaves 76-77). Also available on the World Wide Web.
|
7 |
A multibit reference feedback sigma-delta modulator for radio receivers /Kuang, Wensheng V. January 1900 (has links)
Thesis (Ph.D.) - Carleton University, 2007. / Includes bibliographical references (p. 111-116). Also available in electronic format on the Internet.
|
8 |
Digital Signal Processing with Signal-Derived Timing: Analysis and ImplementationChen, Yu January 2017 (has links)
This work investigates two different digital signal processing (DSP) approaches that rely on signal-derived timing: continuous-time (CT) DSP and variable-rate DSP. Both approaches enable designs of energy-efficient signal processing systems by relating their operation rates to the input activity.
The majority of this thesis focuses on CT-DSP, whose operations are completely digital in CT, without the use of a clock. The spectral features of CT digital signals are analyzed first, demonstrating a general pattern of the quantization noise spectrum added in CT amplitude quantization. Then the focus is narrowed to the investigations of the system characteristics and architecture of CT digital infinite-impulse-response (IIR) filters, which are barely studied in the previous work on this topic. This thesis discusses and addresses previously unreported stability issue in CT digital IIR filters with the presence of delay-line mismatches and proposes an innovative method to design high-order CT digital IIR filters with only two tap delays. Introducing an event detector allows the operation rate of a CT digital IIR filter to closely track the input activity even though it is a feedback system. For the first time, the filtered CT digital signal is converted to a synchronous digital signal. This facilitates integrating the CT digital filter and conventional discrete-time systems and expands the applications of the former. This discussion uses a computationally efficient interpolation filter to improve the signal accuracy of the synchronous digital output. On the circuit level, a new delay-cell design is introduced. It ensures low jitter, good matching, robust communication with adjacent circuits and event-independent delay.
An integrated circuit (IC) with all these ideas adopted was fabricated in a TSMC 65 nm LP CMOS process. It is the first IC implementation of a CT digital IIR filter. It can process signals with a data rate up to 20 MHz. Thanks to the IIR response and the 16-bit resolution used in the system, the implemented filter can achieve a frequency response much more versatile and accurate than the CT digital filters in prior art. The implemented system features an agile power adaptive to input activity, varying from 2.32mW (full activity) to 40μW (idle) with no power-management circuitry.
The second part of the thesis discusses a variable-rate DSP capable of processing samples with a variable sampling rate. The clock rate in the variable-rate DSP tracks the input sampling rate. Compared to a fixed-rate DSP, the proposed system has a lower output data rate and hence is more computationally efficient. A reconstruction filter with a variable cutoff frequency is used to reconstruct the output. The signal-to-noise ratio remains fixed when the sampling rate changes.
|
9 |
Automatic Tuning of Integrated Filters Using Neural NetworksLenz, Lutz Henning 23 July 1993 (has links)
Component values of integrated filters vary considerably due to· manufacturing tolerances and environmental changes. Thus it is of major importance that the components of an integrated filter be electronically tunable. The method explored in this thesis is the transconductance-C-method. A method of realizing higher-order filters is to use a cascade structure of second-order filters. In this context, a method of tuning second-order filters becomes important The research objective of this thesis is to determine if the Neural Network methodology can be used to facilitate the filter tuning process for a second-order filter (realized via the transconductance-C-method). Since this thesis is, at least to the knowledge of the author, the first effort in this direction, basic principles of filters and of Neural Networks [1-22] are presented. A control structure is proposed which comprises three parts: the filter, the Neural Network, and a digital spectrum analyzer. The digital spectrum analyzer sends a test signal to the filter and measures the magnitude of the output at 49 frequency samples. The Neural Network part includes a memory that stores the 49 sampled values of the nominal spectrum. ·A comparator subtracts the latter values from the measured (actual) values, and feeds them as input to the Neural Network. The outputs of the Neural Network are the values of the percentage tuning amount The adjusting device, which is envisioned as a component of the filter itself, translates the output of the Neural Network to adjustments in the value of the filter's transconductances. Experimental results provide a demonstration that the Neural Network methodology can be usefully applied to the above problem context. A feedforward, singlehidden layer Backpropagation Network reduces the manufacturing errors of up to 85% for the pole frequency and of up to 41% for the quality factor down to less than approximately 5% each. It is demonstrated that the method can be iterated to further reduce the error.
|
10 |
Automatic Synthesis of VLSI Layout for Analog Continuous-time FiltersRobinson, David Lyle 17 March 1995 (has links)
Automatic synthesis of digital VLSI layout has been available for many years. It has become a necessary part of the design industry as the window of time from conception to production shrinks with ever increasing competition. However, automatic synthesis of analog VLSI layout remains rare. With digital circuits, there is often room for signal drift. In a digital circuit, a signal can drift within a range before hitting the threshold which triggers a change in logic state. The effect of parasitic capacitances for the most part, hinders the timing margins of the signal, but not its functionality. The logic functionality is protected by the inherent noise immunity of digital circuits. With analog circuits, however, there is little room for drift. Parasitic influence directly affects signal integrity and the functionality of the circuit. The underlying problem automatic VLSI layout programs face is how to minimize this influence. This thesis describes a software tool that was written to show that the minimization of parasitic influence is possible in the case of automatic layout of continuous-time filters using transconductance-capacitor methods.
|
Page generated in 0.1603 seconds