Spelling suggestions: "subject:"kontrollvolumen"" "subject:"kontrollvolum""
1 |
Modeling and experimental verification of pressure prediction in the in-mold coating process for thermoplastic substratesBhagavatula, Narayan L. 14 July 2006 (has links)
No description available.
|
2 |
Turbulent orifice flow in hydropower applications, a numerical and experimental studyZhang, Ziji January 2001 (has links)
This thesis reports the methods to simulate flows withcomplex boundary such as orifice flow. The method is forgeneral purposes so that it has been tested on different flowsincluding orifice flow. Also it contains a chapter about theexperiment of orifice flow. Higher-order precision interpolation schemes are used inumerical simulation to improve prediction at acceptable gridrefinement. Because higher-order schemes cause instability inconvection-diffusion problems or involve a large computationalkernel, they are implemented with deferred correction method. Alower-order scheme such as upwind numerical scheme is used tomake preliminary guess. A deferred (defect) correction term isadded to maintain precision. This avoids the conflict betweenprecision order and implementation difficulty. The authorproposes a shifting between upwind scheme and centraldifference scheme for the preliminary guess. This has beenproven to improve convergence while higher order schemes havewider range of stability. Non-orthogonal grid is a necessity for complex flow. Usuallyone can map coordinate of such a grid to a transformed domainwhere the grid is regular. The cost is that differentialequations get much more complex form. If calculated directly innon-orthogonal grid, the equations keep simple forms. However,it is difficult to make interpolation in a non-orthogonal grid.Three methods can be used: local correction, shape function andcurvilinear interpolation. The local correction method cannotinsure second-order precision. The shape function method uses alarge computational molecule. The curvilinear interpolationthis author proposes imports the advantage of coordinatetransformation method: easy to do interpolation. A coordinatesystem staggered half control volume used in the coordinatetransformation method is used as accessory to deriveinterpolation schemes. The calculation in physical domain withnon-orthogonal grid becomes as easy as that in a Cartesianorthogonal grid. The author applies this method to calculate turbulentorifice flow. The usual under-prediction of eddy length isimproved with the ULTRA-QUICK scheme to reflect the highgradients in orifice flow. In the last chapter, the author quantifies hydraulicabruptness to describe orifice geometry. The abruptness canhelp engineers to interpolate existing data to a new orifice,which saves detailed experiments
|
3 |
Turbulent orifice flow in hydropower applications, a numerical and experimental studyZhang, Ziji January 2001 (has links)
<p>This thesis reports the methods to simulate flows withcomplex boundary such as orifice flow. The method is forgeneral purposes so that it has been tested on different flowsincluding orifice flow. Also it contains a chapter about theexperiment of orifice flow.</p><p>Higher-order precision interpolation schemes are used inumerical simulation to improve prediction at acceptable gridrefinement. Because higher-order schemes cause instability inconvection-diffusion problems or involve a large computationalkernel, they are implemented with deferred correction method. Alower-order scheme such as upwind numerical scheme is used tomake preliminary guess. A deferred (defect) correction term isadded to maintain precision. This avoids the conflict betweenprecision order and implementation difficulty. The authorproposes a shifting between upwind scheme and centraldifference scheme for the preliminary guess. This has beenproven to improve convergence while higher order schemes havewider range of stability.</p><p>Non-orthogonal grid is a necessity for complex flow. Usuallyone can map coordinate of such a grid to a transformed domainwhere the grid is regular. The cost is that differentialequations get much more complex form. If calculated directly innon-orthogonal grid, the equations keep simple forms. However,it is difficult to make interpolation in a non-orthogonal grid.Three methods can be used: local correction, shape function andcurvilinear interpolation. The local correction method cannotinsure second-order precision. The shape function method uses alarge computational molecule. The curvilinear interpolationthis author proposes imports the advantage of coordinatetransformation method: easy to do interpolation. A coordinatesystem staggered half control volume used in the coordinatetransformation method is used as accessory to deriveinterpolation schemes. The calculation in physical domain withnon-orthogonal grid becomes as easy as that in a Cartesianorthogonal grid.</p><p>The author applies this method to calculate turbulentorifice flow. The usual under-prediction of eddy length isimproved with the ULTRA-QUICK scheme to reflect the highgradients in orifice flow.</p><p>In the last chapter, the author quantifies hydraulicabruptness to describe orifice geometry. The abruptness canhelp engineers to interpolate existing data to a new orifice,which saves detailed experiments</p>
|
4 |
One-Dimensional, Finite-Rate Model for Gas-Turbine CombustorsRodriguez, Carlos G. 05 August 1997 (has links)
An unsteady, finite-rate, one-dimensional model has been developed for the analysis for gas-turbine combustors. The basis of the model is the one-dimensional, integral form of the conservation equations for multi-species, non-equilibrium, reacting mixtures. Special procedures were devised for the flow-division of the inlet flow into primary- and annular-flows, for both straight- and reverse-flow combustors. This allows the model to handle complete combustor configurations, which at present are beyond the reach of more sophisticated CFD tools. The model was validated with a steady-state analytical solution for a basic problem, and with steady-state results from a production code applied to a production combustor. Additional calculations show the ability of the code to predict blow-out due to rich and lean mixtures, and to predict the response of a combustor to perturbations in operating and boundary conditions. / Ph. D.
|
5 |
MATHEMATICAL MODELING OF THE IN-MOLD COATING PROCESS FOR INJECTION MOLDED THERMOPLASTIC PARTSChen, Xu 05 February 2003 (has links)
No description available.
|
6 |
Numerical Investigation of Conjugate Natural Convection Heat Transfer from Discrete Heat Sources in Rectangular EnclosureGdhaidh, Farouq A.S., Hussain, Khalid, Qi, Hong Sheng January 2014 (has links)
yes / The coupling between natural convection and conduction within rectangular enclosure was investigated numerically. Three separate heat sources flush mounted on a vertical wall and an isoflux condition was applied at the back of heat sources. Continuity, momentum and energy conservation equations were solved by using control volume formulation and the coupling of velocity and pressure was treated by using the “SIMPLE” algorithm. The modified Rayleigh number and the substrate/fluid thermal conductivity ratio were used in the range 𝑹𝒂𝒍𝒛∗=𝟏𝟎^𝟒−𝟏𝟎^𝟕 and 𝑹𝒔=𝟏𝟎−𝟏𝟎𝟎𝟎 respectively. The investigation was extended to compare results of FC-77 with Air and also for high values of 𝑹𝒔>𝟏𝟎𝟎𝟎. The results illustrated that, when the modified Rayleigh number increases, dimensionless heat flux and local Nusselt number increases for both fluids. Opposite behaviour for the thermal spreading in the substrate and the dimensionless temperature 𝜽, they were decreased when 𝑹𝒂𝒍𝒛∗ is increased. Also with increasing the substrate/fluid thermal conductivity ratio for a given value of the modified Rayleigh number the thermal spreading in the substrate increased which is the reason of the decrease in the maximum temperature value. The present study concluded that, for high values of 𝑹𝒔>𝟏𝟓𝟎𝟎, the effect of the substrate is negligible.
|
7 |
A Numerical Study of Micro Synthetic Jet and Its Applications in Thermal ManagementLi, Shuo 23 November 2005 (has links)
A numerical study of axisymmetric synthetic jet flow was conducted. The synthetic jet cavity was modeled as a rigid chamber with a piston-like moving diaphragm at its bottom. The Shear-Stress-Transportation (SST) k-omega and #61559; turbulence model was employed to simulate turbulence. Based on time-mean analysis, three flow regimes were identified for typical synthetic jet flows. Typical vortex dynamics and flow patterns were analyzed. The effects of changes of working frequency, cavity geometry (aspect ratio), and nozzle geometry were investigated. A control-volume model of synthetic jet cavity was proposed based on the numerical study, which consists of two first-order ODEs. With appropriately selected parameters, the model was able to predict the cavity pressure and average velocity through the nozzle within 10% errors compared with full simulations. The cavity model can be used to generate the boundary conditions for synthetic jet simulations and the agreement to the full simulation results was good. The saving of computational cost is significant. It was found that synthetic jet impingement heat transfer outperforms conventional jet impingement heat transfer with equivalent average jet velocity. Normal jet impingement heat transfer using synthetic jet was investigated numerically too. The effects of changes of design and working parameters on local heat transfer on the impingement plate were investigated. Key flow structures and heat transfer characteristics were identified. At last, a parametric study of an active heat sink employing synthetic jet technology was conducted using Large Eddy Simulation (LES). Optimal design parameters were recommended base on the parametric study.
|
8 |
A study of the effects of inlet preswirl on the dynamic coefficients of a straight-bore honeycomb gas damper sealSprowl, Tony Brandon 17 February 2005 (has links)
In high-pressure centrifugal compressors, honeycomb seals are often used as replacements for labyrinth seals to enhance dynamic stability. A concern exists with the loss of this enhanced stability if the honeycomb cavities become clogged with debris over time. So, as a first objective, static and dynamic tests were conducted on a constant-clearance honeycomb and a constant-clearance smooth-bore seal under three inlet preswirl conditions to determine the effects of inlet preswirl. The resulting leakage flowrate and dynamic parameters, effective stiffness and damping of the seal, were measured for each seal and then compared, with the smooth-bore seal representing the honeycomb seal with completely clogged cells. The second objective was to evaluate a two-control volume theory by Kleynhans and Childs with the measured data under the influence of preswirl.
Both seals have a 114.7mm bore with a radial clearance of 0.2mm from the test rotor. The honeycomb seal has a cell width of 0.79mm and cell depth of 3.2mm. The target test matrix for each preswirl setting consisted of three exit-to-inlet pressure ratios of 15%, 35%, and 50%, and three rotor speeds out to 20,200 rpm. The target inlet air pressure was 70 bar-a.
Experimental results show that, for a clean honeycomb seal, preswirl has little effect on effective stiffness, Keff*, and decreases effective damping, Ceff*, by about 20% at the high inlet preswirl ratio (~0.6). However, comparing smooth and honeycomb seal results at higher inlet preswirl shows a potential reduction in Keff* by up to 68%, and a large drop and shift in positive Ceff* values, which could cause an instability in the lower frequency range. Measured leakage shows a potential increase of about 80%, regardless of test conditions. A swirl brake at the seal entrance would fix this loss in stability by significantly reducing inlet preswirl.
The two-control-volume theory model by Kleynhans and Childs seems to follow the frequency-dependent experimental data well for the honeycomb seal. Theory predicts conservatively (under-predicts) for stability parameters such as k* and Ceff* and for leakage. Predictions for K and Keff may possibly be improved with better measured friction factor coefficients for each seal.
|
9 |
Computational Modeling of Laminar Swirl Flows and Heat Transfer in Circular Tubes with Twisted-Tape InsertsYou, Lishan 16 September 2002 (has links)
No description available.
|
10 |
A multiscale analysis and extension of an energy based fatigue life prediction method for high, low, and combined cycle fatigueHolycross, Casey M. 29 September 2016 (has links)
No description available.
|
Page generated in 0.0446 seconds