This thesis presents a comprehensive procedure to study sub-synchronous interactions in wind integrated power systems effectively and efficiently. The proposed procedure involves a screening phase and a detailed analysis phase. The screening is performed using a frequency scan and the detailed analysis is performed using small signal stability analysis. To facilitate the small signal analysis, a detailed linearized model of a Type 3 wind power plant is presented in this thesis. The model presented includes the generator, a three-mass drive train model, rotor and grid side converter controller models, converter transformer model and the pitch controller model. To accurately capture the effects of sub-synchronous interactions, the ac network is modelled using dynamic phasors. It is shown that using the proposed procedure, the sub-synchronous interaction between a Type 3 wind power plant and a series compensated line is due to an electrical resonance between the wind power plant generator and the series capacitor. It is also shown that this interaction is highly controllable through the rotor side converter current controllers. This fact will be proven by studying the sub-synchronous interactions in a single machine power system as well as in multi machine power systems. This thesis also presents a sub-synchronous interaction mitigation method using network devices. The performance of an SVC and a STATCOM is evaluated in this thesis. A small signal stability analysis based method will be used to design a sub-synchronous damping controller. A method will be presented to estimate the damping controller parameters systematically to obtain the desired performance using small signal stability analysis results. Furthermore, it will be shown that by strongly controlling the voltage of the point of common coupling, the damping of the oscillations produced by the sub-synchronous interaction between the wind power plant and the series compensated line can be improved. Based on the findings of this research, the thesis proposes a number of recommendations to be adopted when studying the sub-synchronous interactions in wind integrated power systems. These recommendations will facilitate to do such studies effectively and pinpoint the root cause of the sub-synchronous interactions.

This thesis is an effort to investigate the operation and the performanceof modular multilevel converters (M2Cs). Proven to be the most promisingtopology in high-voltage high-power applications, it is necessary to put aneffort in understanding the physical laws that govern the internal dynamicsof such converters, in order to design appropriate control methods. AlthoughM2Cs belong to the well-studied family of voltage-source converters (VSCs),and claim a modular structure, their control is significantly more complicatedcompared to two- or three-level VSCs, due to the fact that a much highernumber of switches and capacitors are needed in such a topology. This thesishighlights the important parameters that should be considered when designingthe control for an M2C, through analyzing its internal dynamics, and alsosuggests ways to control such converters ensuring stable operation withoutcompromising the performance of the converter.Special focus is given on ac motor-drive applications as they are very demandingand challenging for the converter performance. Interactions betweenthe internal dynamics and the dynamics of the driven motor are experimentallyinvestigated. The problem of operating the converter when connectedto a motor standing still is visited, even under the condition that a greatamount of torque and current are requested, in order to provide an idea forthe converter requirements under such conditions. Finally, an optimization ofthe converter operation is suggested in order to avoid overrating the convertercomponents in certain operation areas that this is possible.All analytical investigations presented in this thesis are confirmed by experimentalresults on a laboratory prototype converter, which was developedfor the purposes of this project. Experimental verification proves the validityof the theoretical investigations, as well as the correct performance of thecontrol methods developed during this project on a real, physical converter,hoping that the results of this thesis will be useful for large-scale implementations,in the mega- or even giga-watt power range. / Denna avhandling är ett försök att undersöka drift och egenskaper avmodulära multinivåomvandlare (M2C:er). Eftersom denna topologi anses varaden mest lovande inom högspänings-högeffekt-tillämpningar är, och somett underlag för att kunna formulera lämpliga styrmetoder, är det nödvändigtatt lägga kraft i att försöka förståde fysikaliska lagar som styr den inredynamiken i sådana omvandlare. Även om M2C:erna tillhör den välstuderadefamiljen av spänningsstyva omvandlare (VSC:er), och har en modulärstruktur, är deras reglering avsevärt mer komplicerad jämfört med två- ellertre-nivåomvandlare, eftersom ett mycket större antal switchar och kondensatorerär nödvändiga i en sådan topologi. Denna avhandling sätter fingretpå de parametrar som måste beaktas när man konstruerar regleringen för enM2C, genom att analysera den interna dynamiken, samt att föreslå sätt attstyra sådana omvandlare såatt stabil drift kan säkerställas utan att negativtpåverka prestanda.Ett speciellt fokus läggs på växelströmsmotordrifter eftersom de är särskiltutmanande vad gäller prestanda. Växelverkan mellan den interna dynamikenoch motorns dynamik undersöks experimentellt. Problemet att driva motornvid stillestånd behandlas även i fallet med hög ström och högt moment för atterhålla kunskap om kraven påomvandlaren i sådana fall. Slutligen föreslås enoptimering av omvandlarens drifttillstånd för att undvika överdimensioneringav omvandlarens komponenter i de fall detta är möjligt.Alla analytiska undersökningar som läggs fram i denna avhandling är bekräftadegenom experimentella resultat från en laboratorieomvandlare, somutvecklats inom ramen för detta arbete. Den experimentella verifieringen bevisargiltigheten av alla teoretiska undersökningar. Den visar också på demycket goda prestanda som de utvecklade styrmetoderna har vid drift aven verklig fysisk omvandlare. Förhoppningen är att resultaten från detta arbetekan komma till använding i storskaliga implementerinar i mega- ellergiga-wattklassen. / <p>QC 20141201</p>