Cette thèse a pour objectif de démontrer l'intérêt des outils de diagnostic "intelligents" pour application sur les moteurs de fusée. En Europe beaucoup d'efforts ont été faits pour développer quelques techniques innovantes comme les réseaux neuronaux, les méthodes de suivi de raie vibratoire, ou l'identification paramétrique mais peu de résultats sont disponibles quant à la comparaison des performances de différents algorithmes. Un deuxième objectif de la thèse a été celui d'améliorer le système de diagnostic du banc d'essai Mascotte (ONERA/CNES). Il s'agit d'un banc de démonstration pour les moteurs de fusée de type cryogénique représentatif des conditions d'utilisation d'un vrai moteur. Les étapes de la thèse ont été en premier lieu de choisir et d'évaluer des méthodes de diagnostic à base de modèles, en particulier l'identification paramétrique et le filtre de Kalman, et de les appliquer pour le diagnostic d'un système critique du banc Mascotte: le circuit de refroidissement. Après une première validation des nouveaux algorithmes sur des données d'essais disponibles, un benchmark fonctionnel a été mis en place pour pouvoir comparer les performances des algorithmes sur différents types de cas de panne simulés. La dernière étape consiste à intégrer les algorithmes sur les ordinateurs du banc de contrôle de Mascotte pour pouvoir effectuer une évaluation applicative des performances et de leur intégrabilité à l'environnement informatique déjà en place. Un exemple simple de boucle de régulation intégrant l’information du diagnostic est aussi étudié pour analyser l’importance de telles méthodes dans le contexte plus large d’une régulation « intelligente » du banc. / The main objective of this work is to demonstrate and analyze the potential benefits of advanced real time algorithms for rocket engines monitoring and diagnosis. In the last two decades in Europe many research efforts have been devoted to the development of specific diagnostic technics such as neural networks, vibration analysis or parameter identification but few results are available concerning algorithms comparison and diagnosis performances analysis.Another major objective of this work has been the improvement of the monitoring system of the Mascotte test bench (ONERA/CNES). This is a cryogenic test facility based in ONERA Palaiseau used to perform analysis of cryogenic combustion and nozzle expansion behavior representative of real rocket engine operations.The first step of the work was the selection of a critical system of the bench, the water cooling circuit, and then the analysis of the possible model based technics for diagnostic such as parameter identification and Kalman filters.Three new algorithms were developed, after a preliminary validation based on real test data, they were thoroughly analyzed via a functional benchmark with representative failure cases.The last part of the work consisted in the integration of the diagnosis algorithms on the bench computer environment in order to prepare a set-up for a future real time application.A simple closed loop architecture based on the new diagnostic tools has been studied in order to assess the potential of the new methods for future application in the context of intelligent bench control strategies.

Arbetet baseras på en kylanläggning som installerats på ett biogas företag, som till en början var tänkt som ett pilotprojekt men som nu används fullt ut i anläggningen. Projektet var inte utvärderat eller dokumenterat och vilken effekt som överförs var obekant. Arbetets innebörd var att beräkna effekten samt dokumentera systemet i form av både beräkningar, ritning och eventuella effektiviserings områden. Beräkning gjordes via entalpi skillnaden som togs ut över involverade värmeväxlare, samt flödet som togs ut via en reglerventil med hjälp av ett mätinstrument. Ritning gjordes via programmet Visio utifrån anläggningens nuvarande konstruktion. Resultatet för kyleffekten som överfördes beräknades fram via flöde och entalpi, med resultatet 14,03kW över båda värmeväxlarna. Även beräkning på vad en potentiell förbättring av isolering i rörsystemet skulle kunna bidra med där utifrån beräkningarna skulle energibesparingen kunna fördubblas gentemot nuvarande. / The work is based on a cooling plant installed at a biogas company, which was initially intended as a pilot project but is now fully used in the plant. It is not evaluated or documented and how much power is transmitted is unknown. The meaning of the work is to find out the effect and document the system in the form of both calculations, drawing and any areas of efficiency. Calculation was made via enthalpy the difference that was taken out over the heat exchangers involved, as well as the flow that was taken out via a control valve with the help of a measuring instrument. Drawing was made via the Visio program based on the facility's current design. The result for the cooling power that was transferred was calculated via flow and enthalpy, where the result was 14.03 kW over both heat exchangers. Calculation of what a potential improvement of insulation of the pipe system could contribute, based on the calculations, the energy savings could be doubled compared to the current one.

The thesis deals with the design and creation of a system for recording and reporting error states of cooling devices on the principle of a compressor heat pump. An important element of the concept of the entire monitoring system is a built-in platform based on the ESP32 microcontroller for evaluating data measured by sensors. Another key element is the communication module, which sends measured data via GPRS in the form of MQTT messages to the service web application. The application receives, evaluates and records measured data. Subsequently are measured data and evaluated error states presented to the user in the form of tables and interactive graphs.

This master thesis with the influence of heat sources to microclimate in indoor space. The aim of the thesis was to make the calculations of the dynamic behavior in indoor space and suggest ventilation systems for exhaust heat load. for found values. In the practical part of the thesis, individual systems are describing and then they are valorizing in accordance with energy intensity and thermal comfort.