Interest in the use of mass timber in building and construction is growing worldwide, this is due to the structural integrity and reduced environmental footprint of timber-based structures. Concerns associated with the biological and environmental degradation of mass timber necessitate the development of adequate protection strategies to ensure the durability of these products. Preservative treatment is a proven technique that increases the durability and performance of wood in-service and can also be applied to large-sized timber panels such as cross-laminated timber (CLT). Therefore, this study focused on investigating the feasibility of treating prefabricated 3- and 5-layer CLT panels with Copper-azole type C (CA-C) and micronized copper azole (MCA) preservatives. Further, we studied the effects of panel layup and thickness on the preservative impregnation in CLT. Based on the experimental results, we found adequate preservative penetration and retention in the treated 3- and 5-layer CLT panels, particularly in CA-C treated panels. Also, the lengthwise layup shows better treatment results in both CA-C and MCA-treated panels. In addition to the preservative-treatment of CLT panels, this dissertation covers the development of lignin-reinforced polyurethane adhesive (PUR) for bonding glue-laminated timber (Glulam). Herein, the glulam were fabricated and bonded using lignin-reinforced PUR at different wt% (1, 2, and 3) and tested for shear strength, wood failure and delamination. The lignin-treated PUR samples showed improved adhesion properties via high shear strength and reduced delamination compared to the control specimens. Thus, the lignin-reinforced PUR adhesive shows great potential as a bio-based and environment-friendly wood adhesive for producing glulam used in structural applications.