This dissertation demonstrates the design of reversibly self-morphing novel liquid crystalline elastomer (LCE) antennas that can dynamically change electromagnetic performance in response to temperature. This change in performance can be achieved by programming the shape change of stimuli-responsive (i.e., temperature-responsive) LCEs, and using these materials as substrates for reconfigurable antennas. Existing reconfigurable antennas rely on external circuitry such as Micro-Electro-Mechanical-Systems (MEMS) switches, pin diodes, and shape memory alloys (SMAs) to reconfigure their performance. Antennas using MEMS or diodes exhibit low efficiency due to the losses from these components. Also, antennas based on SMAs can change their performance only once as SMAs response to the stimuli and is not reversible. Flexible electronics are capable of morphing from one shape to another using various techniques, such as liquid metals, hydrogels, and shape memory polymers. LCE antennas can reconfigure their electromagnetic performance, (e.g., frequency of operation, polarization, and radiation pattern) and enable passive (i.e., battery-less) temperature sensing and monitoring applications, such as passive radio frequency identification device (RFID) sensing tags. Limited previous work has been performed on shape-changing antenna structures based on LCEs. To date, self-morphing flexible electronics, including antennas, which rely on stimuli-responsive LCEs that reversibly change shape in response to temperature changes, have not been previously explored. Here, LCE antennas will be studied and developed. Also, the metallization of LCEs with different metal conductors and their fabrication process, by either electron beam (E-Beam) evaporation or optical gluing of the metal film will be observed. The LCE material can have a significant impact on sensing applications due to its reversible actuation that can enable a sensor to work repeatedly. This interdisciplinary research (material polymer science and electrical engineering) is expected to contribute to the development of morphing electronics, including sensors, passive antennas, arrays, and frequency selective surfaces (FSS).

Cette thèse est axée sur la fabrication et l’optimisation d’une nouvelle structure permettant théoriquement d’améliorer les performances des cellules à base de silicium cristallin. Cette nouvelle architecture de cellule utilise la technologie des hétérojonctions de silicium a-Si:H/ c-Si (Si-HJ) appliquée sur des structures à contacts interdigités en face arrière (IBC). Le potentiel de rendement des cellules IBC Si-HJ est supérieur à 25%, mais leur fabrication nécessite une localisation des couches de a-Si:H de dopage différent et de leurs métallisations. L’intégration de ces étapes dans un procédé simplifié utilisant des techniques industrielles (PECVD, pulvérisation, sérigraphie et laser) a été étudiée. De plus, une structure obtenue sans séparation entre le BSF et l’émetteur est présentée, permettant de réduire le nombre d’étapes de fabrication. Les avantages ainsi que les limites liés à cette architecture simplifiée ont été illustrés du point de vue expérimental et par simulation. Dans le cadre de ces travaux, le rendement maximum atteint sur les dispositifs IBC Si-HJ simplifiés de 25cm² est de 19% (substrats de type n), ce qui constitue le 3e meilleur résultat au niveau mondial. Les performances des cellules restent encore limitées par l’absorption des couches de a-Si:H utilisées pour la passivation de la face avant, et par la conductivité des couches dopées en face arrière. De nombreuses pistes d’amélioration sont explorées dans cette étude. Un procédé de métallisation innovant a également été élaboré pour le passage sur des substrats de grande taille (150cm²). Il permet de limiter les pertes résistives tout en offrant de la flexibilité au niveau de la géométrie des contacts. La mise en module de cellules ayant ce design de métallisation a ensuite été étudiée, et un module de 4 cellules IBC Si-HJ a pu être fabriqué. / This thesis studies the fabrication and the optimization of a new structure to enhance the efficiency of crystalline silicon based solar cells. This new cell design uses a-Si:H/c-Si heterojunction (Si-HJ) technology applied on interdigitated back contact structures (IBC). With IBC Si-HJ solar cells, the efficiency potential is theoretically higher than 25%. Their fabrication requires to pattern doped a-Si:H and the associated metallization on the same side. The implementation of those process steps has been carefully studied. All processes used in this study are potentially industrial (PECVD, sputtering, screen-printing, and laser) and the obtained structure without buffer layer between the BSF and the emitter allows to reduce fabrication steps. Issues linked to this design have been investigated. Within the frame of this work, the maximum efficiency reached on reduced size devices (25cm²) with n-type substrate and is 19% which is the 3rd best result worldwide. The cell performances are still limited by the absorption of front surface passivating layer (a-Si:H) and by the low doped layer conductivity. Several optimization ways are explored in this study. An innovative metallization process is then elaborated to allow large area solar cell fabrication while limiting resistive losses and offering more flexibility on metallized pattern. The interconnection and the encapsulation of cells with this metallization design have been illustrated and a module with 4 cells has been fabricated.

Due to the extreme properties of diamond, such as extreme hardness, high thermal conductivity, high electrical breakdown strength, high electron and hole mobilities and large band gap, it is of interest to study this material in detail. Before advantage can be taken of diamond’s properties for high-temperature, high-power electronic applications successful doping/ion implantation of diamond must be achieved. This requires an understanding of the types of defects produced during ion irradiation. In the present work, type IIa diamond has been irradiated with various doses of 320keV Xe ions at room temperature. Analytical techniques used are electron spin resonance spectroscopy, Raman spectroscopy, transmission electron microscopy and electron energy loss spectroscopy. Previous models have suggested that upon ion impact, amorphous and/or graphitized clusters are formed in diamond, which will overlap at a critical dose to form a semi-continuous graphitized layer. (For complete abstract open document)

[Some symbols cannot be rendered in the following metadata – please see the PDF file for an accurate version of the Abstract] ¶ Recombination within the bulk and at the surfaces of crystalline silicon has been investigated in this thesis. Special attention has been paid to the surface passivation achievable with plasma enhanced chemical vapour deposited (PECVD) silicon nitride (SiN) films due to their potential for widespread use in silicon solar cells. The passivation obtained with thermally grown silicon oxide (SiO2) layers has also been extensively investigated for comparison. ¶ Injection-level dependent lifetime measurements have been used throughout this thesis to quantify the different recombination rates in silicon. New techniques for interpreting the effective lifetime in terms of device characteristics have been introduced, based on the physical concept of a net photogeneration rate. The converse relationships for determining the effective lifetime from measurements of the open-circuit voltage (Voc) under arbitrary illumination have also been introduced, thus establishing the equivalency of the photoconductance and voltage techniques, both quasi-static and transient, by allowing similar possibilities for all of them. ¶ The rate of intrinsic recombination in silicon is of fundamental importance. It has been investigated as a function of injection level for both n-type and p-type silicon, for dopant densities up to ~5x1016cm-3. Record high effective lifetimes, up to 32ms for high resistivity silicon, have been measured. Importantly, the wafers where commercially sourced and had undergone significant high temperature processing. A new, general parameterisation has been proposed for the rate of band-to-band Auger recombination in crystalline silicon, which accurately fits the experimental lifetime data for arbitrary injection level and arbitrary dopant density. The limiting efficiency of crystalline silicon solar cells has been re-evaluated using this new parameterisation, with the effects of photon recycling included. ¶ Surface recombination processes in silicon solar cells are becoming progressively more important as industry drives towards thinner substrates and higher cell efficiencies. The surface recombination properties of well-passivating SiN films on p-type and n-type silicon have been comprehensively studied, with Seff values as low as 1cm/s being unambiguously determined. The well-passivating SiN films optimised in this thesis are unique in that they are stoichiometric in composition, rather than being silicon rich, a property which is attributed to the use of dilute silane as a process gas. A simple physical model, based on recombination at the Si/SiN interface being determined by a high fixed charge density within the SiN film (even under illumination), has been proposed to explain the injection-level dependent Seff for a variety of differently doped wafers. The passivation obtained with the optimised SiN films has been compared to that obtained with high temperature thermal oxides (FGA and alnealed) and the limits imposed by surface recombination on the efficiency of SiN passivated solar cells investigated. It is shown that the optimised SiN films show little absorption of UV photons from the solar spectrum and can be easily patterned by photolithography and wet chemical etching. ¶ The recombination properties of n+ and p+ emitters passivated with optimised SiN films and thermal SiO2 have been extensively studied over a large range of emitter sheet resistances. Both planar and random pyramid textured surfaces were studied for n+ emitters, where the optimised SiN films were again found to be stoichiometric in composition. The optimised SiN films provided good passivation of the heavily doped n+-Si/SiN interface, with the surface recombination velocity increasing from 1400cm/s to 25000cm/s as the surface concentration of electrically active phosphorus atoms increased from 7.5x1018cm-3 to 1.8x1020cm-3. The optimised SiN films also provided reasonable passivation of industrial n+ emitters formed in a belt-line furnace. It was found that the surface recombination properties of SiN passivated p+ emitters was poor and was worst for sheet resistances of ~150./ . The hypothesis that recombination at the Si/SiN interface is determined by a high fixed charge density within the SiN films was extended to explain this dependence on sheet resistance. The efficiency potential of SiN passivated n+p cells has been investigated, with a sheet resistance of 80-100./ and a base resistivity of 1-2.cm found to be optimal. Open-circuit voltages of 670-680mV and efficiencies up to ~20% and ~23% appear possible for SiN passivated planar and textured cells respectively. The recombination properties measured for emitters passivated with SiO2, both n+ and p+, were consistent with other studies and found to be superior to those obtained with SiN passivation. ¶ Stoichiometric SiN films were used to passivate the front and rear surfaces of various solar cell structures. Simplified PERC cells fabricated on 0.3.cm p-type silicon, with either a planar or random pyramid textured front surface, produced high Voc’s of 665-670mV and conversion efficiencies up to 19.7%, which are amongst the highest obtained for SiN passivated solar cells. Bifacial solar cells fabricated on planar, high resistivity n-type substrates (20.cm) demonstrated Voc’s up to 675mV, the highest ever reported for an all-SiN passivated cell, and excellent bifaciality factors. Planar PERC cells fabricated on gettered 0.2.cm multicrystalline silicon have also demonstrated very high Voc’s of 655-659mV and conversion efficiencies up to 17.3% using a single layer anti-reflection coating. Short-wavelength internal quantum efficiency measurements confirmed the excellent passivation achieved with the optimised stoichiometric SiN films on n+ emitters, while long-wavelength measurements show that there is a loss of short-circuit current at the rear surface of SiN passivated p-type cells. The latter loss is attributed to parasitic shunting, which arises from an inversion layer at the rear surface due to the high fixed charge (positive) density in the SiN layers. It has been demonstrated that that a simple way to reduce the impact of the parasitic shunt is to etch away some of the silicon from the rear contact dots. An alternative is to have locally diffused p+ regions under the rear contacts, and a novel method to form a rear structure consisting of a local Al-BSF with SiN passivation elsewhere, without using photolithography, has been demonstrated.

Due to the extreme properties of diamond, such as extreme hardness, high thermal conductivity, high electrical breakdown strength, high electron and hole mobilities and large band gap, it is of interest to study this material in detail. Before advantage can be taken of diamond’s properties for high-temperature, high-power electronic applications successful doping/ion implantation of diamond must be achieved. This requires an understanding of the types of defects produced during ion irradiation. In the present work, type IIa diamond has been irradiated with various doses of 320keV Xe ions at room temperature. Analytical techniques used are electron spin resonance spectroscopy, Raman spectroscopy, transmission electron microscopy and electron energy loss spectroscopy. Previous models have suggested that upon ion impact, amorphous and/or graphitized clusters are formed in diamond, which will overlap at a critical dose to form a semi-continuous graphitized layer. (For complete abstract open document)

<p>The aim of the thesis is to identify and investigate central themes in two video artworks, Poliisi and Pink Ball, by Swedish artist Annika Larsson. Moreover it is an investigation of the configurations of violence, and an enquiring whether these works have a social-minded intention.</p><p>Elements in scenery, framing and narration are analysed with the term “crystalline regime” (régim cristallin), described by French philosopher Gilles Deleuze, which defines the artificial as opposed to the purely representational. Processes within the narrations of the two works are analysed as rituals, which leads to an investigation of an internal sign-system and to the question whether the rituals in these works have a function. Theory by French philosopher Georges Bataille is used to analyse the ritual with no external purpose, which aims at an intense experience of life. Bataille’s concept “intensity” is used to describe violent as much as erotic themes in the narration as well as in the way the characters are presented, regarding music, camera-angles, etc. Furthermore, the thesis refutes interpretations in which Annika Larssons works are viewed as comments on political matters, such as gender-issues.</p>

<p>Kunskap om grundvattenbildningen är nödvändig för att man ska kunna förutsäga konsekvenserna av grundvattenuttag och underjordsbyggande. Grundvattenbildningen i berggrunden är dock svår att uppskatta. Syftet med avhandlingen var att öka förståelsen av grundvattenbildningen i kristallin berggrund, att undersöka hur grundvattenbildningen ska uppskattas samt att utveckla nya modeller för att beskriva grundvattenbildningen. Studien grundades på tre angreppssätt: grundvattendatering med freoner (CFC), geohydrauliska observationer och matematisk modellering.</p><p>Koncentrationerna av CFC-11 och CFC-113 befanns vara låga i det undersökta berggrundvattnet, vilket i kombination med låga syrgashalter tyder på anaerob nedbrytning. Koncentrationerna av CFC-12 och tritium överensstämde ganska väl, vilket betyder att den skenbara åldern kan vara den sanna åldern. Resultaten tyder på att CFC-datering inte är pålitlig i skogsmiljöer med finkornigt jordtäcke.</p><p>Vid nederbörd observerades ett snabbt gensvar i den hydrauliska potentialen i den studerade bergakviferen, trots det 10 m mäktiga moräntäcket. En avsevärd del av de observerade potentialvariationerna befanns vara belastningseffekter, som inte innebar någon magasinsförändring eller något vattenflöde. Berggrundens belastningseffektivitet uppskattades, ur potentialens svar på lufttrycksförändringar, till 0,95. Ytbelastningen beräknades från mätningar av lufttryck, vatten i jordtäcket och snö. Omkring 20 % av årstidsvariationen hos den hydrauliska potentialen uppskattades bero på enbart belastningsförändringar. En enkel begreppsmässig modell kunde användas för att simulera den observerade hydrauliska potentialen. För att beskriva enskilda grundvattenbildningstillfällen på bästa sätt var det nödvändigt att ta hänsyn till effekten av ytbelastningen.</p><p>Numeriska experiment gjordes med en modell av en jord–bergprofil. När berget modellerades som ett heterogent kontinuum bildades omättade zoner i berget vid stora hydrauliska gradienter. Fenomenet uppträdde i områden där låggenomsläppliga zoner låg uppströms höggenomsläppliga zoner, och ledde till minskad hydraulisk konduktivitet i berget.</p> / <p>Knowledge about the groundwater recharge is essential for the prediction of impacts of groundwater withdrawal and underground construction. Recharge in the bedrock is, however, difficult to estimate. The objectives of this thesis were to increase the understanding of groundwater recharge in crystalline bedrock, to investigate how the recharge could be estimated, and to develop new models to describe the recharge. The study was based on three approaches: groundwater dating using chlorofluorocarbons (CFCs), geohydraulic field measurements, and mathematical modelling.</p><p>Low concentrations of CFC-11 and CFC-113 were found in the bedrock groundwater, which in combination with low dissolved-oxygen levels indicated anaerobe degradation. The CFC-12 and tritium concentrations agreed fairly well, which means that apparent ages could be true ages. The results suggest that CFC dating may not be reliable at forested, humid sites covered by fine-grained soil.</p><p>A quick response in hydraulic head to precipitation was observed in the studied bedrock, despite the 10-m thick till cover. A substantial portion of observed head variations was found to be loading effects, involving no storage changes or water flow. The loading efficiency of the bedrock was estimated, from the air-pressure response, to be 0.95. The surface loading was calculated from measurements of air pressure, water in the soil, and snow. About 20% of the seasonal variation of the hydraulic head was estimated to be related to loading changes only. A simple conceptual model could be used to simulate the observed hydraulic heads. The loading effect had to be included to properly describe individual recharge events.</p><p>Numerical experiments were performed with a soil–bedrock profile. When the rock was modelled as a heterogeneous continuum, unsaturated zones developed at high hydraulic gradients. The phenomenon appeared in areas where low-conductive zones were located upstream of high-conductive zones, decreasing the effective hydraulic conductivity of the material.</p>

No description available.

Kunskap om grundvattenbildningen är nödvändig för att man ska kunna förutsäga konsekvenserna av grundvattenuttag och underjordsbyggande. Grundvattenbildningen i berggrunden är dock svår att uppskatta. Syftet med avhandlingen var att öka förståelsen av grundvattenbildningen i kristallin berggrund, att undersöka hur grundvattenbildningen ska uppskattas samt att utveckla nya modeller för att beskriva grundvattenbildningen. Studien grundades på tre angreppssätt: grundvattendatering med freoner (CFC), geohydrauliska observationer och matematisk modellering. Koncentrationerna av CFC-11 och CFC-113 befanns vara låga i det undersökta berggrundvattnet, vilket i kombination med låga syrgashalter tyder på anaerob nedbrytning. Koncentrationerna av CFC-12 och tritium överensstämde ganska väl, vilket betyder att den skenbara åldern kan vara den sanna åldern. Resultaten tyder på att CFC-datering inte är pålitlig i skogsmiljöer med finkornigt jordtäcke. Vid nederbörd observerades ett snabbt gensvar i den hydrauliska potentialen i den studerade bergakviferen, trots det 10 m mäktiga moräntäcket. En avsevärd del av de observerade potentialvariationerna befanns vara belastningseffekter, som inte innebar någon magasinsförändring eller något vattenflöde. Berggrundens belastningseffektivitet uppskattades, ur potentialens svar på lufttrycksförändringar, till 0,95. Ytbelastningen beräknades från mätningar av lufttryck, vatten i jordtäcket och snö. Omkring 20 % av årstidsvariationen hos den hydrauliska potentialen uppskattades bero på enbart belastningsförändringar. En enkel begreppsmässig modell kunde användas för att simulera den observerade hydrauliska potentialen. För att beskriva enskilda grundvattenbildningstillfällen på bästa sätt var det nödvändigt att ta hänsyn till effekten av ytbelastningen. Numeriska experiment gjordes med en modell av en jord–bergprofil. När berget modellerades som ett heterogent kontinuum bildades omättade zoner i berget vid stora hydrauliska gradienter. Fenomenet uppträdde i områden där låggenomsläppliga zoner låg uppströms höggenomsläppliga zoner, och ledde till minskad hydraulisk konduktivitet i berget. / Knowledge about the groundwater recharge is essential for the prediction of impacts of groundwater withdrawal and underground construction. Recharge in the bedrock is, however, difficult to estimate. The objectives of this thesis were to increase the understanding of groundwater recharge in crystalline bedrock, to investigate how the recharge could be estimated, and to develop new models to describe the recharge. The study was based on three approaches: groundwater dating using chlorofluorocarbons (CFCs), geohydraulic field measurements, and mathematical modelling. Low concentrations of CFC-11 and CFC-113 were found in the bedrock groundwater, which in combination with low dissolved-oxygen levels indicated anaerobe degradation. The CFC-12 and tritium concentrations agreed fairly well, which means that apparent ages could be true ages. The results suggest that CFC dating may not be reliable at forested, humid sites covered by fine-grained soil. A quick response in hydraulic head to precipitation was observed in the studied bedrock, despite the 10-m thick till cover. A substantial portion of observed head variations was found to be loading effects, involving no storage changes or water flow. The loading efficiency of the bedrock was estimated, from the air-pressure response, to be 0.95. The surface loading was calculated from measurements of air pressure, water in the soil, and snow. About 20% of the seasonal variation of the hydraulic head was estimated to be related to loading changes only. A simple conceptual model could be used to simulate the observed hydraulic heads. The loading effect had to be included to properly describe individual recharge events. Numerical experiments were performed with a soil–bedrock profile. When the rock was modelled as a heterogeneous continuum, unsaturated zones developed at high hydraulic gradients. The phenomenon appeared in areas where low-conductive zones were located upstream of high-conductive zones, decreasing the effective hydraulic conductivity of the material.

The aim of the thesis is to identify and investigate central themes in two video artworks, Poliisi and Pink Ball, by Swedish artist Annika Larsson. Moreover it is an investigation of the configurations of violence, and an enquiring whether these works have a social-minded intention. Elements in scenery, framing and narration are analysed with the term “crystalline regime” (régim cristallin), described by French philosopher Gilles Deleuze, which defines the artificial as opposed to the purely representational. Processes within the narrations of the two works are analysed as rituals, which leads to an investigation of an internal sign-system and to the question whether the rituals in these works have a function. Theory by French philosopher Georges Bataille is used to analyse the ritual with no external purpose, which aims at an intense experience of life. Bataille’s concept “intensity” is used to describe violent as much as erotic themes in the narration as well as in the way the characters are presented, regarding music, camera-angles, etc. Furthermore, the thesis refutes interpretations in which Annika Larssons works are viewed as comments on political matters, such as gender-issues.