The cryptographic algorithms are designed to be mathematically secure; however, side-channel analysis attacks go beyond mathematics by taking measurements of the device’s electrical activity to reveal the secret data of a cipher. These attacks also go hand in hand with fault analysis techniques to disclose the secret key used in cryptographic ciphers with even fewer measurements. This is of practical concern due to the ubiquity of embedded systems that allow physical access to the adversary such as smart cards, ATMs, etc.. Researchers through the years have come up with techniques to block physical attacks to the hardware or make such attacks less likely to succeed. Most of the conducted research consider one or the other of side-channel analysis and fault injection attacks whereas, in a real setting, the adversary can simultaneously take advantage of both to retrieve the secret data with less effort. Furthermore, very little work considers a software implementation of these ciphers although, with the availability of small and affordable or free microarchitectures, and flexibility and simplicity of software implementations, it is at times more practical to have a software implementation of ciphers instead of dedicated hardware chips. In this project, we come up with a modular presentation, suitable for software implementation of ciphers, to allow having simultaneous resistance against side-channel and fault analysis attacks. We also present an extension at the microarchitecture level to make our proposed countermeasures more intact and efficient. / M.S. / Ciphers are algorithms designed by mathematicians. They protect data by encrypting them. In one of the main categories of these ciphers, called symmetric-key ciphers, a secret key is used to both encrypt and decrypt the data. Once the secret key of a cipher is retrieved, anyone can find the decoded data and thereby access the original data. Cryptographers traditionally sought to design ciphers in such a way that no adversary could reveal the secret key by finding holes in the algorithm. However, this has been shown insufficient for a specific implementation of a cryptographic algorithm to be considered as “unbreakable” since the physical properties of the implementation, can help an adversary find the secret key and break the encryption. Analyzing these physical properties can be either active; by making controlled changes in the normal progress of its execution, or passive; by merely measuring the physical properties during normal execution. Designers try to take these analyses into account when implementing a cryptographic function and so, in this project, we aim to present architectural support for a combination of some of the countermeasures.

Embedded system designers face multiple challenges in fulfilling the runtime requirements of programs. Effective scheduling of programs is required to extract as much parallelism as possible. These scheduling algorithms must also improve speedup after instruction-set extensions have occurred. Scheduling of dynamic code at run time is made more difficult when the static components of the program are scheduled inefficiently. This research aims to optimize a program’s static code at compile time. This is achieved with four algorithms designed to schedule code at the task and instruction level. Additionally, the algorithms improve scheduling using instruction set extended code on symmetrical homogeneous multiprocessor systems. Using these algorithms, we achieve speedups up to 3.86X over sequential execution for a 4-issue 2-processor system, and show better performance than recent heuristic techniques for small programs. Finally, the algorithms generate speedup values for a 64-point FFT that are similar to the test runs.

The Software/Hardware Implementation and Research Architecture (SHIRA) is a C to hardware toolchain developed by the Computer Architecture Research Group (CARG) of the University of Ottawa. The framework and algorithms to generate the hardware from an Intermediate Representation (IR) of the C code is needed. This dissertation presents the conceiving, design, and development of a module that generates the hardware for custom instructions identified by specialized SHIRA components without the need for any user interaction. The module is programmed in Java and takes a Data Flow Graph (DFG) as an IR for input. It then generates VHDL code that targets the Altera FPGAs. It is possible to use separate components for each operation or to set a maximum number for each component which leads to component reuse and reduces chip area use. The performance improvement of the generated code is compared to using only the processor’s standard instruction set.

Embedded system designers face multiple challenges in fulfilling the runtime requirements of programs. Effective scheduling of programs is required to extract as much parallelism as possible. These scheduling algorithms must also improve speedup after instruction-set extensions have occurred. Scheduling of dynamic code at run time is made more difficult when the static components of the program are scheduled inefficiently. This research aims to optimize a program’s static code at compile time. This is achieved with four algorithms designed to schedule code at the task and instruction level. Additionally, the algorithms improve scheduling using instruction set extended code on symmetrical homogeneous multiprocessor systems. Using these algorithms, we achieve speedups up to 3.86X over sequential execution for a 4-issue 2-processor system, and show better performance than recent heuristic techniques for small programs. Finally, the algorithms generate speedup values for a 64-point FFT that are similar to the test runs.

The Software/Hardware Implementation and Research Architecture (SHIRA) is a C to hardware toolchain developed by the Computer Architecture Research Group (CARG) of the University of Ottawa. The framework and algorithms to generate the hardware from an Intermediate Representation (IR) of the C code is needed. This dissertation presents the conceiving, design, and development of a module that generates the hardware for custom instructions identified by specialized SHIRA components without the need for any user interaction. The module is programmed in Java and takes a Data Flow Graph (DFG) as an IR for input. It then generates VHDL code that targets the Altera FPGAs. It is possible to use separate components for each operation or to set a maximum number for each component which leads to component reuse and reduces chip area use. The performance improvement of the generated code is compared to using only the processor’s standard instruction set.

Embedded system designers face multiple challenges in fulfilling the runtime requirements of programs. Effective scheduling of programs is required to extract as much parallelism as possible. These scheduling algorithms must also improve speedup after instruction-set extensions have occurred. Scheduling of dynamic code at run time is made more difficult when the static components of the program are scheduled inefficiently. This research aims to optimize a program’s static code at compile time. This is achieved with four algorithms designed to schedule code at the task and instruction level. Additionally, the algorithms improve scheduling using instruction set extended code on symmetrical homogeneous multiprocessor systems. Using these algorithms, we achieve speedups up to 3.86X over sequential execution for a 4-issue 2-processor system, and show better performance than recent heuristic techniques for small programs. Finally, the algorithms generate speedup values for a 64-point FFT that are similar to the test runs.

The Software/Hardware Implementation and Research Architecture (SHIRA) is a C to hardware toolchain developed by the Computer Architecture Research Group (CARG) of the University of Ottawa. The framework and algorithms to generate the hardware from an Intermediate Representation (IR) of the C code is needed. This dissertation presents the conceiving, design, and development of a module that generates the hardware for custom instructions identified by specialized SHIRA components without the need for any user interaction. The module is programmed in Java and takes a Data Flow Graph (DFG) as an IR for input. It then generates VHDL code that targets the Altera FPGAs. It is possible to use separate components for each operation or to set a maximum number for each component which leads to component reuse and reduces chip area use. The performance improvement of the generated code is compared to using only the processor’s standard instruction set.

Embedded system designers face multiple challenges in fulfilling the runtime requirements of programs. Effective scheduling of programs is required to extract as much parallelism as possible. These scheduling algorithms must also improve speedup after instruction-set extensions have occurred. Scheduling of dynamic code at run time is made more difficult when the static components of the program are scheduled inefficiently. This research aims to optimize a program’s static code at compile time. This is achieved with four algorithms designed to schedule code at the task and instruction level. Additionally, the algorithms improve scheduling using instruction set extended code on symmetrical homogeneous multiprocessor systems. Using these algorithms, we achieve speedups up to 3.86X over sequential execution for a 4-issue 2-processor system, and show better performance than recent heuristic techniques for small programs. Finally, the algorithms generate speedup values for a 64-point FFT that are similar to the test runs.

The Software/Hardware Implementation and Research Architecture (SHIRA) is a C to hardware toolchain developed by the Computer Architecture Research Group (CARG) of the University of Ottawa. The framework and algorithms to generate the hardware from an Intermediate Representation (IR) of the C code is needed. This dissertation presents the conceiving, design, and development of a module that generates the hardware for custom instructions identified by specialized SHIRA components without the need for any user interaction. The module is programmed in Java and takes a Data Flow Graph (DFG) as an IR for input. It then generates VHDL code that targets the Altera FPGAs. It is possible to use separate components for each operation or to set a maximum number for each component which leads to component reuse and reduces chip area use. The performance improvement of the generated code is compared to using only the processor’s standard instruction set.

Spacecrafts are extensively used by public and private sectors to support a variety of services. Considering the cost and the strategic importance of these spacecrafts, there has been an increasing demand to utilize strong cryptographic primitives to assure their security. Moreover, it is of utmost importance to consider fault tolerance in their designs due to the harsh environment found in space, while keeping low area and power consumption. The problem of recovering spacecrafts from failures or attacks, and bringing them back to an operational and safe state is crucial for reliability. Despite the recent interest in incorporating on-board security, there is limited research in this area. This research proposes a trusted hardware module approach for recovering the spacecrafts subsystems and their cryptographic capabilities after an attack or a major failure has happened. The proposed fault tolerant trusted modules are capable of performing platform restoration as well as recovering the cryptographic capabilities of the spacecraft. This research also proposes efficient fault tolerant architectures for the secure hash (SHA-2) and message authentication code (HMAC) algorithms. The proposed architectures are the first in the literature to detect and correct errors by using Hamming codes to protect the main registers. Furthermore, a quantitative analysis of the probability of failure of the proposed fault tolerance mechanisms is introduced. Based upon an extensive set of experimental results along with probability of failure analysis, it was possible to show that the proposed fault tolerant scheme based on information redundancy leads to a better implementation and provides better SEU resistance than the traditional Triple Modular Redundancy (TMR). The fault tolerant cryptographic primitives introduced in this research are of crucial importance for the implementation of on-board security in spacecrafts.